REPAIR MAINT OF SEEPAGE LEAKAGE, INTERNAL GI FITTINGS, SANITARY FITTINGS AND CERTAIN OTHER MISC BR WORK AT SANGLI APARTMENTS, AHQ CAMP LODHI ROAD AND ECHS POLYCLINIC IN THE AOR OF AGE BR KH,RB AND NDC UNDER GE NEW DELHI

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for or in sunken floor complete all as specified and as directed.

M&L for lean concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) 100mm thick including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) mixed with water proofing compound @ 3% by wt of cement as in sunken floors complete all as specified and as directed. (Note: - water proofing compound shall be measured and paid separately).

Supply only integral water proofing compound.

M&L for cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC complast X 421 IC . Cement slurry admixed with bonding compound Nitobond AR (or equivalent in FOSROC or SIKA) to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC complast X 421 IC (Fosroc Chemicals India Ltd or equivalent in SIKA/ M/s Chouksey chemicals). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 PSI and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastromeric water proofing coating after the primer with a minimum time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC complast X 421 IC (Fosroc Chemicals India Ltd or equivalent in SIKA/ M/s Chouksey chemicals) after ponding test for a period for 72 hours of sunken floor. (e) S&F GI tubing 40 mm dia of medium grade for spout of 600 mm long for each sunken floor.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surfaces 300 X 200X7mm/ 300X450X7 mm coloured tiles set and jointed in neat cement slurry or pointed in white or coloured to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in CM 1:6 as in floor complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in CM 1:6 as in floor complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles n.exc 0.36 sqm over and including 20 mm thick CM 1:6 screed bed in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.

M&L for 15mm thick rendering on fair or unfair faces of brickwork or concrete surfaces in CM 1:4 finish even and smooth without using extra cement including Taking down cement plaster on brick wall surfaces or concrete wall surface on roof parapet wall surfaces or external/internal wall/ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for 15mm thick rendering on fair or unfair faces of brickwork or concrete surfaces in CM 1:6 including Taking down cement plaster on brick wall surfaces or concrete wall surface on roof parapet wall surfaces or external/internal wall/ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for 10 mm thick rendering on concrete surface in CM 1:3 as in ceiling finished even and smooth without using extra cement including Taking down cement plaster on brick wall surfaces or concrete wall surface on roof parapet wall surfaces or external/internal wall/ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of white wash on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1.5 mm thick putty and a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying two coats of oil bound distemper over 1.5 mm thick putty complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern complete all as specified and directed.

S&F in repair stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F powder coated aluminum frame/guiding rail for sliding or side hung window/ ventilators and for sliding shutters with one or more rebates incl jointing cleats for fixing etc complete all as specified and directed

S&F rubber gasket for fixing of glass into window/ventilator shutters complete all as specified and directed.

S&F aluminium locks for locking arrangement of sliding window shutters complete all as specified and directed.

S&F powder coated aluminum glazed/gauzed window and ventilators shutters powder coating side hung type/sliding without sash bar aluminum section weighting 0.55 kg per mtr. including necessary joining cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as peg stays 150mm long hinges 100mm long suitable handle complete all as specified and directed.

S&F powder coated aluminium ornamental grills for window frame complete all as specified directed.

Supplying and fixing 75-80mm long stainless steel handle, complete all as specified and directed.

S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work and aluminium framework complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius in 110mm bore pipe complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (Single T), equal or unequal in 110mm bore pipe complete all as specified and directed.

S&F in repair PVC (SWR) couplers in 110mm bore pipe complete all as specified and directed.

Demolition of brickwork built in Cement mortar or cement lime mortar incl all quoins, arches, pillar etc complete all as specified and directed.

M&L for Brickwork with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces complete all as specified and directed.

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and directed

M&L 2nd class hardwood plain, solid, straight chowkhats and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Dismantling of stone slabs and Cement concrete tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. including removing the demolished material outside the MOD land complete all as specified and directed

M&L for 40mm thick PCC (1:2:4) type B-2 (20mm graded crushed stone aggregate) including finished even and fair without using extra cement complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmX20cmX25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including sand cussion complete all as specified and directed.

S &F as in repair PVC bath room cabinet mirror of size 550 X 490 X 150mm PVC inner & outer shelves of any colour complete all as specified and directed.

Supply & fixing as in repair chromium plated jet suitable for water closet incl 15mm bore CP brass angle valve two way complete all as specified and directed.

S&F in repair 100mm dia cast iron spun cast pipe soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm dia cast iron spun cast pipe soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs spun cast iron floor trap with Cockroach Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75mm, complete all as specified and directed.

S&F in repairs 100 mm dia spun cast iron sanitary connection bend (92.5) with arm 380 to 450mm long (ISI Marked) including jointing in run lead complete all as specified and directed.

All as per item No. 49.00 here-in-before but 75mm dia complete all as specified and directed.

S&F in repairs 100mm dia spun cast iron bends any radius with duck foot or heel rest (ISI Marked) including jointing in run lead complete all as specified and directed.

All as per item No. 51.00 here-in-before but 75mm dia complete all as specified and directed.

S&F in repairs branch piece for 100mm dia CI Spun pipe (equal or unequal) ordinary or inverted fitted with oval access doors complete all as specified and directed.

All as per item No. 53.00 here-in-before but 75mm dia complete all as specified and directed.

S&F in repair spun cast iron cowl 100mm bore pipe complete all as specified and directed.

All as per item No. 55.00 here-in-before but 75 mm bore pipe complete all as specified and directed.

S&F in repair 100mm spun cast iron sanitary connection short connections pipe of length 300mm (ISI Marked) complete all as specified and directed.

S&F Salt glazed stone ware gully traps in repairs square or rounded mouthed type P or S of size 150 x 150cm including excavation earth work concrete in beds, surrounds kerbs etc complete all as specified and directed.

Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100mm pipe complete all as specified and directed.

All as per item No. 59.00 here-in-before but 75mm dia bore pipe complete all as specified and directed.

S&F 100mm bore spun cast iron bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

All as per item No. 61.00 here-in-before but for 75mm bore CI pipe fitted with oval access complete all as specified and directed.

Shri Radhakrishna Associates

SANJEEV ENTERPRISES

Shivam Firetech Engineers