Construction of Primary Health Sub Centre at Aamtalla Paklo, Panchayat- Singarsi, Block- Amrapara, District- Pakur.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.

Providing designation 75A one brick flat soiling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shufering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-1) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing TOR stell reinforcement of 10mm 12mm & 16mm dia bars as TMTC-500 8mm dia

TMTC-500 10mm dia

TMTC-500 12mm dia

TMT-500 16mm dia

Providing designation 75B brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick morter joints cost of screening, materials, scaffolfing, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75B brick work in C.M (1:6) in Foundation with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick morter joints cost of screening, materials, scaffolfing, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125 mm thick reinforcement designation 75 A brick work in CM(1:4) in superstructure with approved quality f clean coarse sand of F.M 2 to 2.5 including the cost of screening, carriage of materials, scaffolding raking out joints to 15 mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying WHITE cement based putty 1 mm thickness over plastered surface to prapare the surface even and smooth complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specification : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickess to be specificed by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados, over 12mm thick bed of cement mortar ;:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing made uPVC door frame mane of uPVC extruded section having an overall dimension as below (tolerane 1mm) with wall thickness 2.0 m (0.2mm) corners of the door frame to be jointed with glavanized bracket and

24mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (0.2mm) with inbuilt edging on both sides. The syles and rails mitredand joint at the corners by means of M.S

Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing 150 mm wide brick drain in cement plaster (1:6) with av. 150 mm clear depth and 125 mm apron including cost of earthwork involved with 75 mm cement concret (1:4:3) over one brick designation 75A flat soling in proper and slope at the

Point Wiring in PVC Conduit, with Modular type Switch Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C

Twin control Point Wrining in PVC Conduit, with Modular type Switch Wiring for twin control light point/fan point/ exhause fan point/ cal bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2 way modular type switch, modular plate, suitable size of GI box etc as required.

S/F Celling Rose :- Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/wooden block including connection as required etc.

S/F Modular type electronic fan requlator :- Supplying and fixing stepped type fan regulator on the existing modular plat switch box including connections but excluding modular plate etc as required

Supply, fitting, fixing and testing of 1200 mm sweep, double ball-bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod al accessories as required

S.I.T.C of following rating surface mounted LED tube lighti fitting suitable for 230V 50 Hz, single plase suppy etc. complete as required. 20w/22w LED tube

Bulk head fitting with 9/10 wall LED

S.I.T.C of following rating LED post top lamp made in dia cast aluminium housing with decorative clear/opal acrylic diffuser on existing pie including connection with 1.5 sq mm copper conductor etc all complete as required 45w LED Post top lamp opel

12* (300mm) Exhause fan

Installation of exhaust fan upto 450mm sweep in the existing opening, including makinig the hole to suit the size of he above fan making good the damage, connection, testing, commisioning etc as required.

S/F light plug point with modular type accessories :- Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc as required.

S/F light plug point with modular type accessories :- Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 and 15/6 amps modular socket outlet and 15/16 amps moudlar switch connection, painting etc as required.

S/F 20 amps SPN MCB industrial socket :- Supplying and fixing 20 amps, 240V, SPN industrial socket coutlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB insheet steel enclusure on surace or in recess with chained metal cover for the socket outlet and complete with connection, testing & commissioning etc.

S/F Modular boxes, base & cover plate :- Supplying and fixing following size/modules G.I box along with modular base & cover plate for modular switches in recess etc as required. 4/5 Module (78mm x140mm x 50mm)

8 Module (78mm x230mm x 60mm)

S/F Modular type blanking plate :- Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.

S/F T.P. MCB OB :- Supplying and fixing following way three pole & neutral, sheet steel, MCB distribution board, 415 volts, onsurface/recess, complete with tinned copper bus bar, neutral bus-bar, earthbar, dinbar, interconnection, powder painted including earthing etc. as require 4 way (4+12) Double Door, Horizontal type

SUBMAIN WIRING COPPER IN PVC CONDUIT Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/ recesse medium class PVC conduit4R x 10 sq mm + 2R x 6 sq mm Earth Wire

4R x 16 sq mm + 2R x 6 sq mm Earth Wire

2R x 4 sq mm + 1R x 4 sq mm Earth Wire (Sockets)

2R x 2.5 sq mm + 1R x 2.5 sq mm Earth Wire (Sockets Boards)

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580 mm. long with 10lit low Level PVC Cistern

Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C. With 'P' trap of parry hindustan or any other approved I.S.S. Make including supplying and fixing 15 litres C.I. Mosquito proof low down flushing cistern of approved make with complete fittings With C.I. handle and R.S. or bracket with telescope flush pipe with brass coupling and plumbers joints spindle stop cock of approved uality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved pain over a coat of red oxide priming all complete as per specification and direction of E/I. With s trap with 10lit low Level PVC Cistern

Supplying, fitting and fixing vitreous white glazed earthen ware was hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I or R.S brackets 32mm C.I brass waste, 15mm dia C.I body spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C waste pipe 750 mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying fitting and fixing white glazed fire's clay sink of approved make with overflow arrangements supported on C.I or R.S painted brackets 40mm di C.P brass waster with C.P brass chain and rubber plug 40mm dia P.V.C waste pipe about 750mm long with brass coupling at one ended 15mm C.I body brass spindle bib cock of approved quality of weight not less than 450 grams, including cutting wall and making good the same etc. all complete specification and directio E/I. Kitchen sink 600 mm x 450 mm x 250 mm

Supplying, fitting and fixing H.C.I pipes with ear of approved make conforming to I.S.I 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth woek or scaffolding where necessary etc. all complete as per specification and direction of E/I. 100 mm dia

75 mm dia

Supplying and fixing H.C.I fittings of approved make confirming to I.S.S 1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earthwork or providing scaffolding as the case may be all complete as per specification and direction of E/I. H.C.I Heat Rust bend 100 mm dia (wt. 5.5 kg app)

80 mm dia (wt 4 kg app)

H.C.I duble junction with door and ear 100 mm dia (wt. 15.5 kg app)

80 mm dia (wt 15.5 kg app)

Floor trap with grating 100 mm dia

Norton paten H.C.I Cowel 100mm dia (wt 3.25 kg appx)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter metre 110 mm diameter

Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticied - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 100 mm

Single tee with door 110x110x110 mm

Bend 87.5* 110 mm bend

Shoe (Plain) 110 mm Shoe

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws, and washers complete

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting, vc fixing the pipe with claps at 1.00 m spacing. This includes joints of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same includingt testing of joints complete as per direction of E/I. 15 mm dia

20 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting, vc fixing the pipe with claps at 1.00 m spacing. This includes joints of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. 25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all round S.W pipes including bed concrete as per standrad design 100 mm dia meter S.W.pipe

Providing and fixing bail valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore

25 mm nominal bore

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I brick masonry chamber with water tight C.I cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type with common burnt clay F.P.S (non modular) bricks of class designation 7.5

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Construction brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 Coarse sand) C.I cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C tap slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design, inside dimensions 455x610 mm and 45 cm deep for single pipe line

Supplying all materials, labours and tools and equipment for drilling 200x150x125 mm dia bore well in any kind of soil and rock by using DTH Super Rig machine and ball hammer technology inclusive of mobilization, demobilization,of rigs air compressor all complee for all depth, as per direction of Engineer -in-charge. (a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to125.00 M below G.L

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, all complete, for all depths, as per direction of Engineer -in-charge.

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor all as per requirement and direction of Engineerin-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, Nremovable as per requirement all complete for borewell of 150Nmm dia

Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per 2800 (part I). Including necessary bolts & nuts required size complete. 150 mm clamp.

Supplying fitting and fixing of KSB/KIRLOSKER/CRI make 1.00/1.5HP Submersible pump set having head of 135 metre including all taxes, royalty, etc all complete job as per direction of E/I.

Supplying of 3 core 4 sq. mm flat copper cable of Finolex make for pump set connection with panel board including labour cost of making conneting etc all complete.

Cost of one of ISI marked extra deep india mark - II hand pump confirming to IS 13287:1992 with latest amendment no is 1 to 6 complete with all do…do…. E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick bailast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling dressing & finishing the top smooth

Providing and laying in position cement concrete of specified grade excluding all work up to plinth level 1:3:6 (1 cement : 3 coarse sand zone - II) : 6 grade stone aggregate 20

Sloping portion 1:20

Providing designation 75A brick work in C.M. (1:6) in foundation and plinth all complite as per direction of E/I. Wall

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

(i) C.I cover and frame 300 x 300 mm inside

(ii) S.C.I plain bend 100 mm dia

(iii) S.C.I tee 150 mm dia

Carriage of Materials Cement Lead 12km

Sand Lead 39 km

Stone Chips Lead 14 km

Brick Lead 39 km

Goods & Service Tax (G.S.T.) -@18%

Labour Cess -@1%

Please Enable Macros to View BoQ information