REPAIR TO DISPERSAL JOINT FILLING, PAINTING AND CONNECTED WORKS AT TECHNICAL AREA IN ARMY AVN UNIT UNDER GE JHANSI

Amount

M&L for preparation of existing joints by manually/ mechanically raking out to depth of 20 to 30mm and width of joints 10to 15mm, cleaning the joints with coir brushes and removing all the fine particles, cleaning to concrete surfaces and joints with the help of air compressor and removing away the existing sealing compound and all other loose materials to a distance exc 200 meter but n’exc 250 meter as directed and providing a back up rod of specified dia and applying polyeurethene primer to joint with light pressure and filling the joints with polyurethane base sealing compound confirming to IS/ASTM including fixing masking tape to prevent edges of joints becoming dirty due to spillage of sealant complete all as specified and directed. Note: - (manufacturer: FOSROC (COLPOR-200 GRAY) OR Chemtallraj India Pvt Ltd. (RALLITHANE) OR STP LTD(Shalifex PU)or CICO or Cippy ply Seal or Bostic.

Description same all as per item No 1 above but width of joints 16 mm to 20 mm complete all as specified and directed.

Description same all as per item No 1 above but width of joints 21 mm to 25 mm complete all as specified and directed.

M&L for preparation of old painted surface and applying two coat of WATER BASED paint, for lines,dashes,arrowa ,letters etc, on roads pavements and the like exceeding 10 cm, wide with road marking paint white or any tint complete using mechanical means complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) (including tiles) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note: The cost of sand cushion is included in rate complete all as specified and directed.

M & L Providing cement concrete Type B-0 1:2:4 (12.5 mm graded aggregate) as in rounded or chamfered on edges or sealing of edges complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces camouflaging pattern upto 15 mtr height complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Excavation in post holes in hard/dense soil each n exc 0.50cum getting out, returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete. type C2 1:3:6( 40mm graded stone aggregate) complete all as specified and directed.

M&L rolled mild steel in. trussed purlins, post , crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for 2mm thick fibre glass reinforced translucent plain sheeting with 100 mm side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for preparation of new steel and iron work of any description not otherwise described over 10cm width or girth and two coat of synthetic enamel paint over a coat primer complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

jay maa engineers

HARNAM SINGH ANIL SINGH

ARTISTIC BUILD CO

VIJAY BUILDERS

M/S JAI BALAJI TRADERS

M/s Jagdish Chandra Arora

M/S NASIM AND CO.