Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹45.2 LAccepted-AOC | 1 | Accepted-AOC 1st Lowest | |
| 2 | 2₹47.7 L+₹2.4 L (5.39%)Rejected-AOC | 2 | Rejected-AOC 2nd Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically disqualified | |
| 4 | Rejected-Technical | - | Rejected-Technical Technically disqualified | |
| 5 | Rejected-Technical | - | Rejected-Technical Technically disqualified |
| Sl No | Description | Qty | Unit | Sh. Anil Kumar L1 | SAI FIRE APPLIANCES PVT LTD L2 |
|---|---|---|---|---|---|
| 1.00 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 25,000 | Litre | 6 ₹1,50,000 Lowest | 6.5 ₹1,62,500 |
| 2.00 | [24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core | 300 | Meter | 300 ₹90,000 Lowest | 800 ₹2,40,000 |
| 3.00 | SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .
MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.200MM DIA (NS) | 30 | Per Metre | 3,500 ₹1,05,000 | 2,000 ₹60,000 Lowest |
| 4.00 | SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .
MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.150MM DIA (NS) | 460 | Per Metre | 2,400 ₹11,04,000 | 1,750 ₹8,05,000 Lowest |
| 5.00 | SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .
MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.100MM DIA (NS) | 395 | Per Metre | 1,200 ₹4,74,000 Lowest | 1,400 ₹5,53,000 |
| 6.00 | SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .
MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.32MM DIA (NS) | 524 | Per Metre | 700 ₹3,66,800 | 465 ₹2,43,660 Lowest |
| 7.00 | SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .
MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.25MM DIA (NS) | 390 | Per Metre | 550 ₹2,14,500 | 435 ₹1,69,650 Lowest |
| 8.00 | Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.200MM DIA (DSR 11.7)(NS) | 6 | Each | 5,200 ₹31,200 Lowest | 7,500 ₹45,000 |
| 9.00 | Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.150MM DIA (DSR 11.6)(NS) | 2 | Each | 4,200 ₹8,400 Lowest | 6,500 ₹13,000 |
| 10.00 | Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.100MM DIA (DSR 11.5)(NS) | 4 | Each | 2,000 ₹8,000 Lowest | 5,850 ₹23,400 |
Tender Value
₹50.4 L
EMD Value
₹1.0 L
Closing Date
19 Mar 2024, 5:00 pmClosed
GAJENDER SINGH
PD - II, Gurgaon
Insatallation of Fire Fighting system in 50 Bedded Hospital at Farrukhnagar
2024_HRY_365400_1
20240FA447F6 A482 4E4C 9553 13D141BE91DF622BAR
Open Tender
Civil Works
Works
180 days
Farukh Nagar
2 documents required · 2 mandatory
₹5,000
₹1.0 L
Yes
30 Sept 2026
8 Mar 2024
20 Mar 2024
8 Mar 2024
19 Mar 2024
8 Mar 2024
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .