GE(S) BTD 76 OF 2024-25 PROVISION OF 06 X SEPTIC TANKS AND NEW SEWAGE PIPE LINE CONNECTION FROM THE EXSITITNG TOILET TO MAIN SEWAGE LINE HOUSING REGIMENT QURTER GAURD AND ADM OFFICE UNDER AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STAT

Amount

M&L for DWCPE (SN8) 200(ID nominal) mm diameter pipes laid on bedas per IS code 16098 part-II complete all as specified and directed

M&L plain Cement concrete 1:4:8 type D2 (40 mm graded aggregate) in haunching of pipe of 200 mm dia pipe and mass-concrete complete all as specified and directed

M&L FOR DWCPE (SN8) 300(ID nominal) mm diameter Pipes laid on bed as per IS code16098 Part-II complete all as specified and directed

M&L plain Cement concrete 1:4:8 type D2 (40 mm graded aggregate) in haunching of pipe of 300 mm dia pipe and mass-concrete complete all as specified and directed

M&L 100 mm thick GRANULAR SUB BASE BEDDING Kankar or laterite, spread, rolled and consolidated to gradient and camber required

Demolition of brickwork build in cement mortar.

M&L brickwork with sub class 'B' bricks straight or curved on plan exc 6.0 m radius built in cement mortar 1:4 complete all as specified and directed.

Excavating in trenches manually, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft and loose soil complete all as specified and directed.

Excavating in trenches manually, n exc 1.5m wide and exc 1.5m but not exc 3.0m in depth ; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft and loose soil complete all as specified and directed. including timbering arrangement as per SSr Part-I

Excavating in trenches by mechanical means (hydraulic excavator) in foundation trenches or drains n exc 10sq m on plan and n exc 1.5m wide and getting out the excavated soil and disposal of surplus as directed within a lead of 50m. including timbering arrangement as per SSr Part-I

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L 15 mm thick cement plastering in CM 1:4 on other than fair faces of brickwork or concrete surface finised even and smooth without using extra cement complete all as speciifed and directed

M&L 15 mm thick cement plastering in CM (1:4) with water proofing compound (WPC) on fair faces of brickwork or concrete surface finised even and smooth without using extra cement complete all as speciifed and directed. (WPC measured and paid for separately)

Supply only water proofing compound ISI marked.

Cutting into existing manholes for connecting new drains of 200 to 300 mm dia , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

S&F SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, ISI marked conforming to IS-12592, graded rectangular clear opening 560X560mm and circular in size and fixed over manhole after demolition of PCC coping & manhole Cover & set in CM 1:4 including PCC benching in CM (1:2:4) and finishing smooth Note : reinforcement , concrete , form work and handles paid under relavent items

M&L RCC M-30 (20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete conmplete all as specified and directed.

M&L RCC, M-30 (20 mm graded aggregates) as in walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses conmplete all as specified and directed.

M&L RCC, M-30 (20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like conmplete all as specified and directed.

M&L fair finished Formwork flat/ curved to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter etc cpmplete all as specified and directed.

M&L fair finished Formwork flat/ curved to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better etc cpmplete all as specified and directed.

M&L fair finished Formwork flat/ curved to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)r etc cpmplete all as specified and directed.

M&L TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L Mild steel pvc coated Factory made 25 mm overall size with 16 mm TMT bars rungs of size (wxL) 263 mm x165 mm size fixed in RCC while casting complete all as specified and directed.

M&L extra for forming of fair finish drain or channel 30 cm inner girth incl forms,moulds , mit-tred/stopped extra all as specified and directed.

S&F Salt-glazed stoneware gully traps, square or round mouthed, type `P' 150mmx150mm complete.

M&L for Soakage wells 2.4 M dia X 3.0 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size as per dwg no BTD-804

M & L for 10 user 5000 ltrs capacity moulded Anaerobic septic tank for an anaerobic design in which bacteria treats waste under most favourable conditions, process effectively prevents repid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet-outlet short circuit of waste water which is prevented to ensure long and enough retention time for effective teratment, thus the effluent done not contain any solid or scum that could clog up the pipe line. The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the botton of the septic tank (known as sludge). The liquid wastes are also held in the septic tank while bacteria beark down solids into liquids in an enaerobic environment, process is know as primary treatment some bacteria and viruses are adsorbed into solid particles and held in the sludge ro scum layers, allowing for minted removal of disease causing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the intel and outlet to the soak pit. cover the manholes with the lids provided and tank is ready to use incl PCC 1:L4:8 below foundation, returning and filling, removal of excess soil, connection to existing sewage line include site clearance etc. complete all as specified and directed.

200 mm thick solling except material (metal to be reused retrived vide item no 1 above) interstics filled, surface formed and rolled and consolidated to required gradient and camber .

100mm thick ( compacted thickness ) WBM except material (metal to be reused retrived vide item no 1 above) stone, sand stone flin t or guartzite of grading II randing from 63mm to 40mm, hollows blinded with and including screening with moorum, watered. consolidated each layer separately to the required graidient and camber with 8 to 12 tonne power roller complete all as specified.

M&L cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub floors, add Rough and ready to receive further finish., complete all as specified.

M&L 60mm thick machine pressed precast concrete inter-locking tiles M-35 any shape , size, colour/pattern(as approved) over and including 25mm thick sand bed/cushioning, complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section embeded in conc, brickk work, etc, incl taking out embeded portion and making good disturbed ground, complete all as specified

Excavating in post holes or similar holes each n.exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and ramming surplus soil to a distance e exc 50m and making good as in soft/loose soil

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate in foundation, post holes, filling and mass concrete, etc all as specified

M&L for mild steel work as in post and struts in fencing including cutting tops to shape, as directed, drilling holes, notching for wire etc, flat iron fillets, etc incl all necessary drilling, bolting or riveting, welding etc and including embeding in concrete etc; complete all as specified

S&F Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with10 mm dia of neck and 40 mm long, hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed

Dismantling fencing wire mesh any type, complete all as specified and as directed.

Supply only mild steel galvanised chain link fencing of mesh size 50mm x50 mm/100x100 and dia of wire not less than 3 mm etc complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed

S&F galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 65mm to 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified

M&L for preparation of new steel and iron surfaces of any description n. exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L Preparing surface and treating ends of posts etc., and treated with tar or coal tar black paint area n exc 0.5 sq. m each, complete all as specified and directed.

M/s Kamal Builders (BID ID -3193570)

KARTIK BUILDERS (BID ID -3194984)

AABIA CONSTRUCTION (BID ID -3194494)