Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
7 Oct 2026, 4:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
48 conditions · 1 needing a document upload
The bidder has to submit the Annexures attached with tender:- I/A,I/B,II, III,IV/A,IV/B , tenderfirst Sheet duly fill-up and signed (As applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Mode of Payment from Railway through a "Letter of Credit(LC)" arrangement. If yes, attach beneficiary Bank details. Details available in Special condition.
The Balance Sheets and all other Financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
(Special Condition of Contract for mandatory updating of Labour data on Railway'sshramikkalyan portal by Contractor (Ref:- Railway Board letter no.-2018/CE-I/CT/4, Dated17.10.2018.)
A. Contractor is to abide by the provisions of Payment of Wages act &Minimum Wages act interms ofclause 54 and 55 of Indian Railway GeneralCondition of Contract. In order to ensure thesame, anapplication has beendeveloped and hosted onwebsitewww.shramikkalyan.indianraihwars.gov.in'.Contractor shall register his firm/companyetc. and uploadrequisite details oflabour and their payment in this portal. These details shall beavailable inpublicdomain. The Registration' updation of Portal shall be done as under:(a)Contractor shall apply for onetime registration of his company/firm etc. inthe Shramikkalyanportal with requisite details subsequent toissue of Letter ofacceptance. Engineer shall approvethe contractor's registration within 7 daysof receiptof such request. (b)Contractor onceapproved by any Engineer, cancreate password with login ID (PANNo.) for subsequent use ofportal for allLOAs issued in his favour. (c) The contractor once registered onthe portal,shallprovide details of his Letter of Acceptances (LOA)/Contract Agreementson shranikkalyanportalwithin 15 days of issue of any LOA For approval ofconcerned engineer. Engineer shall update(ifrequired) and approve thedetails of LOA filled by contractor within 7 days of receipt of suchrequest. (d)After approval of LOA by Engineer, contractor shall fill the salient details ofcontractlaboures engagedin the contract and ensure updating of each wagepayment to them onshramikkalyan portal on monthlybasis. (e) It shall bemandatory upon the contractor to ensurecorrect and promt uploading of allsalientdetails of engaged contractual labour & paymentmade thereof aftereach wage period. B. Whileprocessing payment of any 'ON account bill'or'Final bill' or relese of 'Advance ' or 'PerformanceGuarantee/Security deposit' contractor shallsubmit a certificate to the Engineer orEngineer'srepresentative that " I have uploaded thecorrect details of contract laboursengaged inconnection with this contract and payment madeto them during the wage period in Railway'sShramikkalan portal atwww.shramikkalyan.indianrailways.gov.in till _____, month,______ Year."
Special Conditions for inclusion of 'Letter of Credit' as Mode of Payment in works Tender or Service tender. (Authority: - Railway Bd. letter no.2018/CE-I/CT/9, dated: 04.06.2018).
For all the tenders having advertised cost of Rs.10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement.
This option of taking payment through LC arrangement has to be exercised in IREPS (Indian Railway Electronic Procurement System - the e-application on which tenders are called by Railways) by the tenderer at the time of bidding itself, and the tenderer shall affirm having read over and agreed to the terms and conditions of the LC option.
The option so exercised, shall be an integral part of the bidder's offer.
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract.
In case tenderer opts for payment through LC, following shall be the procedure to deal release of payment through LC:
The LC shall be a sight LC.
The contractor shall select his Advising/Negotiating bank for LC. The incidental cost towards issue of LC and its operation thereof shall be borne by the contractor.
SBI, New Delhi, Main Branch will be the nodal branch for issue of LCs based on online requests received from Railway Accounts Units for tenders opened in financial year 2018-19. SBI branches where the respective Railway Accounts Office has its Account (local SBI branch) will be the issuance/reimbursing branch for LC issued under this arrangement. The Bank shall remain same for this tender till completion of contract. The incidental cost @ 0.15% per annum of LC value, towards issue of LC and operation thereof shall be borne by the contractor and shall be recovered from his bills.
The LC shall be opened initially for duration of 180 to 365 days in consultation with contractor. The LC shall be extended time to time as per the progress of the contract, on the request of the contractor. The value of LC to be opened initially as well as extended thereafter shall be finalised by the engineer in consultation with the contractor on the basis of expected progress of work.
The LC terms and conditions shall inter-alia indemnify and save harmless the Railway from and against all losses, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the contractor, his agents or employees, in relation to the Letter of Credit (LC). All sums payable/borne by Railways on this account shall be considered as reasonable compensation and paid by contractor.
The LC terms and conditions shall inter-alia provide that Railways will issue a Document of Authorisation (format enclosed as Annexure 2) after passing the bill for completed work, to enable contractor to claim the authorized amount from their bank.
The acceptable, agreed upon document for payments to be released under the LC shall be the Document of Authorisation.
The Document of Authorisation shall be issued by Railway Accounts Office against each bill passed by Railways.
On issuance of Document of Authorisation, a copy of Document of Authorisation shall be posted on IREPS for download by the contractor. A digitally signed copy of Document of Authorisation shall also be sent by Railway Accounts Office to Railway's bank (Local SBI Branch).
The contractor shall take print out of the Document of Authorisation available on IREPS and present his claim 3.5.10 to his bank (advising Bank) for necessary payments as per LC terms and conditions. The claim shall comprise of copy of Document of Authorisation, Bill of Exchange and Bill.
3.5.11 The payment against LC shall be subject to verification from Railway's Bank (Local SBI Branch).
3.5.12 The contractor's bank (advising bank) shall submit the documents to the Railway's Bank (Local SBI Branch).
The Railway's bank (issuing bank) shall, after verifying the claim so received w.r.t. the digitally signed 3.5.13 Document of Authorisation received from Railway Accounts Office, release the payment to contractor's bank (advising bank) for crediting the same to contractor's account.
Any number of bills can be dealt within one L.C, provided the sum total of payments to contractor is within the amount for which LC has been opened.
3.5.15 The LC shall be closed after the release of final payment including PVC amount, if any, to the contractor.
The release of performance guarantee or security deposit shall be dealt directly by railway with the 3.5.16 contractor i.e., not through LC.
Payment Terms:
For Purely Supply Items:-90% of the value of each Supply Item of Schedule of Works will bePaid after supply of Items and on production of the following documents: - (i) Receipt ofMaterial at Consignee's depot. (ii) Original inspection certificate / waiver of inspection issued byInspecting Officer.(iii)Manufacturers' inspection certificate that the materials are in accordancewith the specifications of the contract. Invoice in duplicate. A certificate that the materialssupplied are as per the contract and the amount claimed in the invoice is correct as per termsof the contract. (vi) (a) Store receipt certificate issued by Railway official/Representative as performat as Annexure - R of existing Tender document(Copy enclosed). 5% percent payment forpurely Supply Items against tender schedule of works will be made after successfulcommissioning of the Station. (b) The balance 5% percent payment for purely Supply Itemsagainst tender schedule of works will be made after Completion of Work, with Final Bill of theContract.
For Purely Execution/Installation items: - 90% of the value of each Purely Installation Item ofSchedule of Works will be paid after Installation & Testing of the Item. (a)5% percent paymentfor Purely Execution /Installation items against tender schedule of works will be made aftersuccessful commissioning of the station. (b)The balance 5% percent payment for purelyExecution /Installation Items against tender schedule of works will be made after successfulcommissioning of the Station. Note: In case commissioning of station is delayed by more than06 months on Railway Account and the physical work has been completed by the contractor intotality then 5% payment on account of commissioning of the station shall be released to thecontractor.
For Supply & Installation items: - 90% percent payment for Supply &installation Items againsttender schedule of works will be made after successful installation & testing and on productionof the documents mentioned above in Para 1. on account bill shall be paid only on productionof certificate by the site Engineer that relevant portion of installation has been completed. (a)5% percent payment for Supply &Installation Items against tender schedule of works will bemade after successful commissioning of the Station. (b)The balance 5%percent payment forsupply & installation items against tender schedule of works will be made after completion ofwork with final bill of the contract.
All payments shall be made on the certificate of the Engineer within a reasonable time of thesubmission of the necessary bills by the contractor. Payment shall be made throughcheques/NEFT/RTGS/LC payment in the name of the Contractor.
Scope of Work :-(i) (i) S&T Work: Utility shifting of LC Gate No. 01 between DBG-MHP and LC No. 28 between DBG-KKHT in connection with the work " Construction of ROB at LC No.- 01 between Darbhanga- Muhamadpur and LC No. 28 between Darbhanga-Kakarghati, (ii) S&T Work: Utility shifting of LC Gate No. 2 between DBG-MHP in connection with the work " Construction of ROB at LC No.- 2 between Darbhanga- Muhamadpur in Darbhanga District(iii)S&T Work: Utility shifting of LC Gate No. 18 between TLWA-LSI in connection with the work " Construction of ROB at LC No.- 18 between Thalwara-Laheriasarai in Darbhanga District. (ii) ProposedSite/Location for Execution of Work: LC No. 1 (DBG-MHP), LC No.28 (DBG-KKHT) ,LC No. 2(DBG-MHP) & (iv) LC No. 18(TLWA-LSI), ECR , SPJ Division. Note: Railway reserves the right to change, alter, add, or delete anysite/location based on operational requirements, feasibility, availability of site, site conditions,or any other reason deemed necessary. (iii) The latest specifications and amendments theretoshall apply to all drawings and specifications. (iv) Technical Specifications, Inspection, Termsand Conditions: The detailed technical specifications, inspection requirements, term, andconditions for execution and supply shall be as per the tender document and applicabletechnical specifications (as applicable). Inspection for each item are specified in the schedule.However, for any safety item requiring Third-Party Inspection (TPI) by RDSO/RITES, shall besupplied with such TPI inspection, irrespective of the inspection agency mentioned in theschedule. (Inspection-Consignee, subject to total item value < 05 Lakh, Non safety criticalitems). TPI (RITES) inspection charge to be borne by contractor. Note: All the materials(schedule items) shall be supplied as per railway requirement. There should be no anycompatibility/suitability issues for supplied materials to the existing/New equipment. (v) Thework shall be executed and materials supplied as per the instructions of the site engineer. (vi)The quantities/items indicated in the schedule may vary according to Railway or siterequirements. Railway reserves the right to change, alter, add, or delete any item or quantityat any stage of the contract. Railway does not guarantee execution of work under every item orthe quantities specified in the schedule. (vii)The rates quoted by the tenderer shall include thecost of materials and all incidental charges, including transportation, loading, unloading,handling, and any other associated expenses. The quoted rates shall also include all applicabletaxes (including GST), duties, royalties, levies, octroi, and other statutory charges (asapplicable). (viii) Recovery of taxes from bills shall be made as per the extant rules in force. (ix)The contractor shall be responsible for the carriage, safe transportation, loading, unloading,storage, protection, and safe handling of all materials required for the execution of the work.(x) All relevant standard guidelines and instructions issued by Railway Board,HQ/East CentralRailway regarding contract management, technical aspects/requirements, execution of work,and prevailing Railway practices, E. C. railway practice inforce etc. shall be apply in thiscontract (as applicable).ECR, SPJ Division.
Transportation of Materials:-
All materials specifically supplied by contractor to be supplied to the SSE/Signal or Tele/Store/SPJ or as specified by competent authority.
Contractor will carry all the materials either Railway supplied or contractor supplied from SSE/Signal or Tele/Store/SPJ or as specified by Competent authority to the site of work at his own cost and arrangement.
Execution of AMC:- Not applicable.
(i) S&T Work: Utility shifting of LC Gate No. 01 between DBG-MHP and LC No. 28 between DBG-KKHT in connection with the work " Construction of ROB at LC No.- 01 between Darbhanga-Muhamadpur and LC No. 28 between Darbhanga- Kakarghati, (ii) S&T Work: Utility shifting of LC Gate No. 2 between DBG-MHP in connection with the work " Construction of ROB at LC No.- 2 between Darbhanga-Muhamadpur in Darbhanga District(iii)S&T Work: Utility shifting of LC Gate No. 18 between TLWA-LSI in connection with the work " Construction of ROB at LC No.- 18 between Thalwara-Laheriasarai in Darbhanga District.
SPJ-SnT-S-09-2026~ECR
SPJ-SnT-S-09-2026
Open
Works - General
3 Months
Samastipur, Bihar
₹0
₹1.3 L
16 Sept 2026
16 Sept 2026
23 Sept 2026
164 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 48,96,165.9 | ||
| — | 1.00 | — | — | ||
| "Supply, transportation, installation & commissioning electrically operated lifting barrier set as per spec. no. RDSO/SPN/208/2012 ver. 2.0 or latest each consisting of 2 nos. of lifting barrier pedestals, each with min. 6 contact circuit controller with top roller type limit switches, hand crank, 2 electric motors, 110VAC of capacity suitable to operate barriers upto 32' long booms, 2 nos. of steel octagonal booms of 32' length with 2 nos. stop boards. Boom light boxes, ms counter weights and 2 nos. of boom support with suitable boom locking but without fringes along with control panel with buttons and indicating lamps, motor connectors and mcb to operate 2 barriers of 1 set. this includes supply and installation of gate hooter - 1 no. and horn ( 8 watt) - 1 no. with all fixing arrangements. All of the above items including supply of cement, civil work materials etc. shall be done by the contractor for commissioning. 230 vac supply only shall be arranged by the railway in near by relay room.(Complete set ).(i) Supply.Inspection By-RDSO" | — | — | — | 4,43,339.49 | |
| — | 1.00 | — | — | ||
| "Supply, transportation, installation & commissioning electrically operated lifting barrier set as per spec. no. RDSO/SPN/208/2012 ver. 2.0 or latest each consisting of 2 nos. of lifting barrier pedestals, each with min. 6 contact circuit controller with top roller type limit switches, hand crank, 2 electric motors, 110VAC of capacity suitable to operate barriers upto 32' long booms, 2 nos. of steel octagonal booms of 32' length with 2 nos. stop boards. boom light boxes, MS counter weights and 2 nos. of boom support with suitable boom locking but without fringes along with control panel with buttons and indicating lamps, motor connectors and MCB to operate 2 barriers of 1 set. this includes supply and installation of gate hooter - 1 no. and horn( 8 watt) - 1 no. with all fixing arrangements . All of the above items including supply of cement, civil work materials etc. shall be done by the contractor for commissioning. 230vac supply only shall be arranged by the railway in near by relay room.(complete set ) (ii) Execution." | — | — | — | 56,797.41 | |
| — | 4.00 | — | — | ||
| "Supply of Sliding boom gate as per E.Rly signal workshop/HWH dwg no. BSA/29/ 730 BSA/29/731 & BSA/29/737. this includes supply of 8 nos. 'e' type lock with key as per IRS spec. IRS:S-30/64 with latest amendment . key lock e type as per drawing no. sa-3376/m with latest amendment, key for e type lock as per drawing no. 3377/m with latest amendment ward no. to be fixed on MS plate as mentioned in the drawing.Inspection By-RITES " | — | — | — | 10,73,183.12 | |
| — | 4.00 | — | — | ||
| Casting concreting & curing o f foundation (1:3:6) for sliding gate a s p e r dwg. n o . SGW-SDAH / sliding gate foundation / 2012 including supply & fixing of holding down bolts with washers and nuts , MS plates of size 350 mm x 350mm x 8 mm, cement etc. 10 foundations required in each set of gate. | — | — | — | 2,63,089.56 | |
| — | 4.00 | — | — | ||
| Installation & commissioning of sliding boom gate. This includes levelling , fixing of sliding boom with fixing of e type lock etc. note all materials except sliding boom gate to be supplied by the contractor. | — | — | — | 23,231.32 | |
| — | 13.00 | — | — | ||
| "Supply of CLS Post 4.5 mtr. and Ladder 4.5 Mtr. With bases as per RDSO DRG.No.SA.5533/ADV and RDSO Spec.No.S6- 81.Inspection by-Consignee." | — | — | — | 3,13,499.94 | |
| — | 13.00 | — | — | ||
| Casting, concreting and curing of foundation for Main signal and as per DRG.No.SGW/MGS/S1/91 including cost of all materials required for casting and concreting and provision of holding down bolts & nuts. | — | — | — | 1,22,509.79 | |
| — | 11.00 | — | — | ||
| "Installation, erection and wiring of CLS unit (Non-Metallic (FRP) colour light signal housing multi-unit type), L E D unit including paying out of tail cable from Location Box and earthing of CLS (LED type).This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable forRE area, Two aspect complete (without lenses, lamps and signal transformer) as per RDSO Drg. No. SA- 23003/A/M/ADV,ALT-8 and as per Spec No RDSO/SPN/194/2006 (version 1.0) with latest amdt a n d F R P material a s p e r R D S O S p e c No. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only.NOTE: - Installation, erection & wiring of signalling unit includes LED signal litghtening unit including current regulator. This also includes protection of unit from Rain water. Signal unit should be compatible to 'LED type.(i) Supply.Inspection by-Consignee." | — | — | — | 3,71,555.36 | |
| — | 11.00 | — | — | ||
| "Installation, erection and wiring of CLS unit (Non-Metallic (FRP) colour light signal housing multi-unit type), L E D unit including paying out of tail cable from Location Box and earthing of CLS (LED type).This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, Two aspect complete (without lenses, lamps and signal transformer) as per RDSO Drg. No. SA- 23003/A/M/ADV,ALT-8 and as per Spec No RDSO/SPN/194/2006 (version 1.0) with latest amdt a n d F R P material a s p e r R D S O S p e c No. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only.Note: - Installation, Erection & wiring of signalling unit includes LED signal litghtening unit. This also includes protection of unit from rain water. Signal unit should be compatible to LED type(ii) Execution." | — | — | — | 23,239.48 | |
| — | 2.00 | — | — | ||
| "Supply Installation, erection and wiring of CLS unit (Non-Metallic (FRP) colour light signal housing multi-unit type),LED unit including paying out of tail cable from Location Box and earthing of CLS (LED type).This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, THREE aspect complete (without lenses, lamps and signal transformer) as per RDSO Drg. No. SA- 23002/A/M/ADV,ALT-8 and as per Spec No RDSO/SPN/194/2006 (version 1.0) with latest amdt and FRP material as per RDSO Spec No. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. NOTE:- Signal unit should be compatible to 'LED type. NOTE:- Installation, erection & wiring of signalling unit includes LED signal lightining unit including current regulator. This also includes protection of unit from Rain water.(i)Supply Inspection by-Consignee." | — | — | — | 73,236.4 | |
| — | 2.00 | — | — | ||
| "Installation, erection and wiring of CLS unit (Non-Metallic (FRP) colour light signal housing multi-unit type),LED unit including paying out of tail cable from Location Box and earthing of CLS (LED type).This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, THREE aspect complete (without lenses, lamps and signal transformer) as per RDSO Drg. No. SA- 23002/A/M/ADV,ALT-8 and as per Spec No RDSO/SPN/194/2006 (version 1.0) with latest amdt and FRP material as per RDSO Spec No. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. NOTE:- Signal unit should be compatible to 'LED type. NOTE:- Installation, erection & wiring of signalling unit includes LED signal lightining unit including current regulator. This also includes protection of unit from Rain water.(ii) Execution" | — | — | — | 5,150.56 | |
| — | 8.00 | — | — | ||
| Casting, Concreting and Curing of foundation and erection for full apparatus case(GKP- type) as per DRG No. SGW/MGS/L1/91 including cost of all materials required for fixing holding down bolts, casting, concreting and fixing of "E" type lock. Note :i) The contractor will provide holding down bolts, ii) Bottom of apparatus cases should be filled with sand and the top surface covered with masonry work and neat cementing. | — | — | — | 57,050.16 | |
| — | 8.00 | — | — | ||
| Fixing, wiring of terminal strips, Bakelite strip, transformers, relays fuses with base and supply and fixing of shelves for full apparatus case with termination earthing of cable and wiring with lettering as required including supply of wires and miscellaneous materials, sand filling and plastering over sand filling per location.(All materials except transformers, relay, terminal strips, Bakelite strip and fuses with base to be supplied by the contractor.) | — | — | — | 35,946.08 | |
| — | 8.00 | — | — | ||
| "Supply of full size location box as per design of GKP signal workshop.Inspection by-Consignee. " | — | — | — | 2,16,997.36 | |
| — | 16.00 | — | — | ||
| "Supply of E-type lock without key,spec.no.IRS-S-30, Drg.no.S-3376/M key -S-3377/M. Individual number of miniature E locks and Normal size of locks required at site to be decided by the site engineer as per site requirement. Inspection by-RDSO." | — | — | — | 26,399.84 | |
| — | 16.00 | — | — | ||
| "Key for E type lock supplied above.Inspection by-Consignee." | — | — | — | 3,964.16 | |
| — | 8.00 | — | — | ||
| Filling earth around location box/signal post for a width of 0.5 m on all sides, upto a level of 150 mm below the foundation top. This work includes consolidation of earth by watering (Unit CUM means per CUM)watering. | — | — | — | 1,799.6 | |
| — | 17.00 | — | — | ||
| "Supply of slotted angle (40x40 x 2 mm) .Inspection by-Consignee." | — | — | — | 5,055.29 | |
| — | 3.00 | — | — | ||
| "Supply of paper base hylumsheet 12 mm thick. Inspection by-Consignee." | — | — | — | 25,236.81 | |
| — | 65.00 | — | — | ||
| "Supply of PBT ARA terminal as per IRS SPECN No. IRS:S- 75-91. i)6 way.Inspection by-RDSO" | — | — | — | 39,550.55 | |
| — | 24.00 | — | — | ||
| "Supply of Bakelite Strip/Sheet of size (950 x 75 x 12) mm. For fixing 30 nos. ARA terminals/Fuse base terminals/Fuse base.Inspection by-Consignee." | — | — | — | 15,345.36 | |
| — | 6.00 | — | — | ||
| Shifting of location boxes with manual labour, JCB or poclain machine by exposing the cable gently without any damage to location box and inside signalling gear. | — | — | — | 28,675.86 | |
| — | 32.00 | — | — | ||
| "Supply and transportation of Earth Electrode as per Drg.Nos.RE/33/P/7021 (MOD.''F'') or latest. Inspection by-Consignee." | — | — | — | 1,67,104 | |
| — | 105.00 | — | — | ||
| "Supply and transportation of Earth Leads 50mmx6mm mild steel for earthing as per Drg. Nos. RE/33/P/7021 (MOD. ''F'') or latest. Inspection by-Consignee." | — | — | — | 18,795 | |
| — | 32.00 | — | — | ||
| Excavation of earth pit, placing & fixing of Earth electrode with construction of cement enclosure to SEM Drawing Nos. 19-D6 and drawl of 6 SWG GI/Copper cable from earth electrode to goomties/relay room/cabin/station, etc. and drawl of MS flat 35mm x 6mm for signal post/Location box shall be used as the case may be, including fixing at both ends of the wire/MS flat. This includes transportation of materials. Note: Materials such as charcoals, salt, sal ammoniac, 6 SWG GI wire, copper lugs with Steel bolts & nuts etc. shall be supplied by the contractor. MS flat 35mm x 6mm/Copper cable shall be supplied by Railway. | — | — | — | 49,280 | |
| — | 15.00 | — | — | ||
| Concreting on Railway cables/S&T gears in ratio of 1:2:4 using cement of good quality, sand, stone chips of size 12 mm to be used for concreting purpose along with related missionary work. All materials required for execution of the work will be supplied by the firm as per site engineer. This includes water curing of concreted portion for minimum 3 days. Note: Suitable arrangement for continuous water curing to be ensured. Associated work of digging etc. to be done by contractor. | — | — | — | 71,729.7 | |
| — | 16.00 | — | — | ||
| "Supply of electrical key transmitter for crank handle interlocking arrangement siding control, LC Gate control as per yard diagram, approved circuit diagram and IRS Spec.No.IRSS-21/64.and IRS S-23 (latest).Inspection by-RDSO" | — | — | — | 1,59,848.16 | |
| — | 40.00 | — | — | ||
| "Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec.no, IRS- S-76/89 material to be procured from RDSO approved firm only with performance guarantee. (a)16/0.2 mm.(unit qty. Numbers means per coil.) .Inspection by-RDSO" | — | — | — | 47,385.6 | |
| — | 6.00 | — | — | ||
| "Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec.no. IRS-S-76/89 (Latest amendment) material to be procured from RDSO approved firm only with performance guarantee. (i)3/0.737 sq. mm.(unit qty.Numbers means per coil.)Inspection by-RDSO." | — | — | — | 15,905.52 | |
| — | 3.00 | — | — | ||
| "Electronic LC gate telephone systems with voice recorder as per RDSO Spec.no. RDSO/SPN/TC/51/ 2011 rev 1.0. a) Master telephone with in-built voice logger.Inspection by-Consignee." | — | — | — | 91,121.97 | |
| — | 18.00 | — | — | ||
| "Electronic LC gate telephone systems with voice recorder as per RDSO pec.no. RDSO/SPN/TC/51/ 2011 rev 1.0. b) Slave telephone.Inspection by-Consignee." | — | — | — | 1,25,365.32 | |
| — | 3.00 | — | — | ||
| "Electronic lc gate telephone systems with voice recorder as per RDSO spec.no. RDSO/SPN/TC/51/ 2011 rev 1.0. c) 24v power pack with mf battery - 7 AH for lc gate telephone.Inspection by-Consignee." | — | — | — | 25,843.26 | |
| — | 1400.00 | — | — | ||
| "Excavation of Trench in all kinds of soil and refilling of trenches (1.2 Mtr, Depth, 300 mm Width) - without bricks.Note:-(I) Payment will be made as per actual work done on pro rata basis, if required depth is not available at site.(II) If the depth of trench is not uniform in a span of 100 mtr.or shorter length, if site condition demands along the cable run minimum depth will be taken for that particular stretch for payment. " | — | — | — | 2,04,918 | |
| — | 10.00 | — | — | ||
| "Laying cables of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.ii)2 core to 12 core signalling cable." | — | — | — | 1,17,569.2 | |
| — | 0.25 | — | — | ||
| "Laying cables of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.iii) Telecom cable 5 Prs./10 Prs./Quad." | — | — | — | 3,182.4 | |
| — | 100.00 | — | — | ||
| Installation of Double Wall Corrugated (DWC) pipe with socket coupler. This includes trenching 1.2 mtr. Depth and back filling. | — | — | — | 10,918 | |
| — | 50.00 | — | — | ||
| "Supply of G.I. Pipe with threaded collars of 100 mm nominal bore specn. No. IS 1239 medium grade. Perforated of required length on bridge / below metaled road/ L-xing /Culvert as per technical specification of tender.A) Supply portion for the G. I. Pipe & collars. Inspection by- Consignee." | — | — | — | 62,086.5 | |
| — | 50.00 | — | — | ||
| "Fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn. No. IS 1239 medium grade. Perforated of required length on bridge / below metaled road/ L-xing /Culvert as per technical specification of tender.B) Execution with remaining miscellaneous materials." | — | — | — | 4,686 | |
| — | 250.00 | — | — | ||
| Excavation of trench less trench/manual boarding paring size upto 110 mm) up to a depth of minimum 1.0 meter along with laying of HDPE/DWC pipe and its accessories, all other items which will be required for laying of cable through HDPE/DWC Pipe (Track/Road Crossing) as per requirement at site. | — | — | — | 2,25,192.5 | |
| — | 400.00 | — | — | ||
| Termination of cable cores on ARA terminals or on 8 way terminals in the cable termination rack. | — | — | — | 7,592 | |
| — | 25.00 | — | — | ||
| Carrying out alterations to the existing relay wiring at relay rack/location as per the circuit diagram. The work includes releasing the existing unused wires and wiring the relays using wire PVC 16/0.02 mm copper. (Wire PVC 16/0.02 mm copper, paint, soldering materials and all other miscellaneous materials required for the work shall be supplied by the contractor. | — | — | — | 12,580.5 | |
| — | 300.00 | — | — | ||
| "Supply of Disconnect type Terminal, screwless, 2 IN 2 OUT (as per spec. no. RDSO/SPN/189/2004 or latest) along with all accessories including separators for fixing on Cable Termination Rack/Location boxes for Cable Termination Purpose. Inspection by-RDSO" | — | — | — | 31,425 | |
| — | 300.00 | — | — | ||
| Fixing installation of disconnect terminal (Wago or Similar) on relay rack/ctr/location with steel carrier rail. | — | — | — | 456 | |
| — | 30.00 | — | — | ||
| "Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack. Fuses (2A, IRS : S- 78/92).Inspection by-RDSO." | — | — | — | 4,882.5 | |
| — | 30.00 | — | — | ||
| "Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack. Fuse Base (DRG No. SA - 23748, IRS: S-75/91) .Inspection by-RDSO" | — | — | — | 7,863.3 | |
| — | 30.00 | — | — | ||
| "Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. (a) 2 Amp. Capacity.Inspection by-RDSO" | — | — | — | 1,386.6 | |
| — | 30.00 | — | — | ||
| "Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. (b) 6 Amp. Capacity.Inspection by-RDSO" | — | — | — | 3,638.7 | |
| — | 4.00 | — | — | ||
| "Supply of Desk type Electronic Magneto Telephone (DTMF) as per Specification Nos. IRS: TC/79/2000 with amd 4.0 or latest.Inspection by-Consignee." | — | — | — | 14,200 | |
| — | 4.00 | — | — | ||
| "Supply of Thermo-shrink jointing (TSF) kits for jointing underground Quad cable of size 0.9mm/1.4mm diameter conductor for straight/condenser/Y- (Derivation)/Loading Coil/Transformer Joints as per Specification Nos. IRS-TC-77/2012 Rev.3 with Amd. 3.0 or latest.Inspection by-RDSO." | — | — | — | 13,040 | |
| — | 4.00 | — | — | ||
| Execution of Straight joint on Quad cable/ jelly filled Telecom cable using Thermo-shrink/Universal jointing kit (RTSF). This includes excavation of cable joint pit of size 1.5 m X 1.5 m X 1.2 m for jointing of cables, back filling and ramming after jointing. After jointing, the cable through test such as insulation test, continuity test etc. to be carried out jointly with Railway Engineer. If any defect or any damage is observed during jointing the contractor has to redo the joint free of cost.Note: In case jointing is required to be done in the Location boxes, then 80% payment will be released. | — | — | — | 5,992 | |
| — | 4.00 | — | — | ||
| "Supply of VF Transformer (1120:470/ 1120:1120/ 470:470/470:600/ 1200:600 Ohm) as per Specification Nos. IRS-TC-76/2021 Ver 1.0 or latest (Cylindrical type) or IRS/TC/22/ 2021 Ver 1.1 or latest (Rectangular type).Inspection by-Consignee." | — | — | — | 3,908 | |
| — | 2.00 | — | — | ||
| "Supply of 24 Fiber OFC Joint Closure as per Specification Nos. RDSO/SPN/TC/68/ 2014 Rev 1.0 or latest complete with all accessories including sealing with mechanical clamp facility.Inspection by-Consignee." | — | — | — | 8,226 | |
| — | 48.00 | — | — | ||
| Splicing of Optical Fiber Core and routing in joint closure/FDMS as per instruction of site Engineer. | — | — | — | 7,296 | |
| — | 2.00 | — | — | ||
| Construction of OFC jointinhg pit of size 1m x 1m x 0.6m, using bricks, snd and cement in the ratio 1:3. The thickness of the wall shall be 120mm, The top cover shall be of concrete of thickness 75mm with two iron handles on top of it. The pit shall be covered with sand after putting the joint enclosure. All construction material to be supplied by contractor. | — | — | — | 14,834 | |
| — | 1.00 | — | — | ||
| "Supply of Battery Charger - Track Feed Up to 10 Amp, Spec. No.IRS:S-89/93 (Amd.-2) or Latest. Inspection by-RDSO." | — | — | — | 7,168.4 | |
| — | 2.00 | — | — | ||
| "Supply of B-Type choke coil having anneled enamelled copper wire for DC track circuit Spec. No. IRS-S-65/83(Latest).Inspection by-RDSO. " | — | — | — | 12,761.56 | |
| — | 1.00 | — | — | ||
| " Supply of Track feed resistance Disc type 0 to 15 Ohm as per drawing no. SA-20165/M.Inspection by-RDSO. " | — | — | — | 840.72 | |
| — | 3.00 | — | — | ||
| "Supply of lead acid secondary cell to IS-1651 and RDSO letter no STS/E/Cells/Secondary with intercell connectors, level indicator porcelain insulator, for mounting and ceramic vent plugs 80 AH. (Number means Cell). Inspection by-RDSO." | — | — | — | 13,567.71 | |
| "Charging of lead acid secondary cells of various capacities as per manufactures instruction/railway engineer's instructions. Acid & distilled water will be suppled by the contractor. 80 AH (12 Cell)." | — | 0.25 | — | — | |
| — | 1.00 | — | — | ||
| Installation wiring, testing and commissioning of Single/Double rail DC track circuit as per approved track circuiting plan. The work includes track battery charging and installation, track bonding (double ) with 8 SWG soft GI Wire laying of tail cable with track lead junction box, rail connector with alvanised iron wire track lead junction box, rail connector with Galvanised iron wire track jumpering with supporting arrangement for holding as per IYD Plan. It also includes installation and wiring of track feed chargers, track relays, track circuit, equipment in the location box including fuses and ARA terminals required for the purpose as per Drg.No.SK/10/95(NKG) including drilling of 9/32" Hole on rails where required fixing of track lead junction boxes provision of tail cable terminations etc. ii) Short length track circuit upto 200 mts. | — | — | — | 4,667.52 | |
| — | 25.00 | — | — | ||
| "Supply of channel Pin with single groove 7.2 mm Dia for 4 mm Dia bond wire to DRG.No.S-69/M & IRS Specn. IRS:S-S17 (or latest).Inspection by-Consignee." | — | — | — | 138.75 | |
| — | 13.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (i) Main signal post, signal unit, Surface base and complete fitting as per E.C.Rly standard practice. | — | — | — | 14,409.46 | |
| — | 11.00 | — | — | ||
| Painting of two coats of enamel paints lover one coat of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (i) Location boxes inside and outsided surfaces with Aluminum paint. (a) Single case. | — | — | — | 10,167.85 | |
| — | 8.00 | — | — | ||
| Dismantling & Releasing of following S&T gears. The work includes transportation of the released material to the store of respective Consignee's store (will be mention in Tender documents.) and properly stacking the same in the store. The rate shall cover the cost of tools and plants, ladders, scaffoldings, all other adjuncts required for the works. Location box /Junction box which includes releasing of terminal board, relays, terminals, batteries and chargers | — | — | — | 7,934.64 | |
| — | 13.00 | — | — | ||
| Dismantling & Releasing of following S&T gears. The work includes transportation of the released material to the store of respective Consignee's store (will be mention in Tender documents.) and properly stacking the same in the store. The rate shall cover the cost of tools and plants, ladders, scaffoldings, all other adjuncts required for the works. b) Signal post which includes dismentalling of unit, ladder, base mounted shunt signals and fitting, (units numbers means per signal) | — | — | — | 23,902.32 | |
| — | 4.00 | — | — | ||
| "Relay, AC immune, plug in type, Style 'QBCA1', DC biased point contactor, 24V, 2F(HD).4B contacts, front contacts (Heavy duty) and back contacts metal to carbon complete with plug board retaining clip and connectors confirming to BRS 943, IRS 534 & IR5:5 23 (As applicable). The interlocking code for this unit shall be BCE3K .Inspection by-RDSO" | — | — | — | 36,509.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
tendernoticepdf.pdf
ATTACHMENT
Tender1stsheetpdf.pdf
ATTACHMENT
Annexures.pdf
ATTACHMENT
GCC2022WithACS_10.pdf
ATTACHMENT
ACS-11-GCC-2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .