REPAIR/ MAINT TO JOINT FILLING , EPOXY TREATMENT, PQC, PME, PAINTING NAD CONNECTED ITEMS

Amount

Material and Labour for preparation of old painted concrete surfaces with washing down soap water of runway, taxi track road for painting with mechanical mode of application as lines, dashes, arrows, letters and the like exceeding 10cm width or girth and applying one coat of runway road marking paint aqua based golden, yellow, or white colour as approved by Garrison Engineer to give uniform finish complete all as specified and directed. Note :- Masking tape should be used on edges of paints before painting work and removed the masking tape after paint is applied where ever required and as directed by Engineer-in-Charge.

Material and Labour for preparation of old painted concrete surfaces with washing down soap water of runway, taxi track road for painting with mechanical mode of application as lines, dashes, arrows, letters and the like not exceeding 10cm width or girth and applying one coat of runway road marking paint aqua based golden, yellow, or white colour as approved by Garrison Engineer to give uniform finish complete all as specified and directed. Note :- Masking tape should be used on edges of paints before painting work and removed the masking tape after paint is applied where ever required and as directed by Engineer-in-Charge.

Complete removal of existing Joints & Material and Labour of Expansion Joints (10mm X 25mm) on PCC pavements by racking out existing sealing compound cleaning the joint throughtly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade 'B' (Jet fuel resistance ) as per IS 1834-984 complete all as specified and directed.

Complete removal of existing Joints & Material and Labour of Construction Joints (10mm X 25mm) on PCC pavements by racking out existing sealing compound cleaning the joint throughtly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade 'B' (Jet fuel resistance ) as per IS 1834-984 complete all as specified and directed.

Complete removal of existing Joints & Material and Labour of Dummy Joints (10mm X 25mm) on PCC pavements by racking out existing sealing compound cleaning the joint throughtly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade 'B' (Jet fuel resistance ) as per IS 1834-984 complete all as specified and directed.

Material and Labour for repair to broken/damage portion of concrete slab or pavement of surface area not exceeding 1 square metre by cutting damaged portion to slab/spoil edges to triangular / rectangular cross section and removing all loose and foreign materials and depositing the same to out side MOD land and cleaning the surface by compressed air to remove all dust dirt etc and washing with hydrochloric acid and filling epoxy resin mortar after application of epoxy primer as per manufacture instructions bull nosing the edges complete all as specified and directed. Note :- Material obtained from damaged portion of concrete slab shall be removed from out side MOD land.

Complete removal of existing treatment of wall surfaces & material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over existing wall surfaces area complete all as specified and directed.

M/S SAMRAT TRADING AGENCY