REPAIR MAINT IN OFFICE BUILDING OF AAO SILIGURI ADJACENT GUEST HOUSE AND RESIDENTIAL AREA OF DAD COMPLEX AT SILIGURI UNDER GE SEVOKE ROAD

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

M&L for 20 mm thick screed bed or bedding layers for layng floor tiles etc in cement mortar 1:6 complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:3 on other than fair face of brick work for laying tiles in vertical surfaces complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x300x7 to 8 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed complete all as specified and directed.

M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed

M&L for 18-20mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed

De-sludging/cleaning completely of solid/liquid sludge by pumping and or manually from inside the septic tank and removal of sludge to a distance not exceeding 100 mtrs and depositing in a excavated pit of appropriate size as directed duly filled up with earth in layers of 30 cm thick including spreading bleaching powder and taking out RCC manhole cover slab for cleaning and resetting in CM 1:6 after cleaning all as specified and directed by Engineer-in-Charge. Note :- (i) Earth to be filled over the pit shall be filled after sufficient absorption of liquid and size of pit shall be made accordingly. (ii) To avoid any health hazard or spreading of any foul gas, bleaching powder shall be spread as directed by the Engineer-in-charge. Cost of spreading bleaching powder and excavating the earth pit and filling of earth etc shall be deemed to be included in the rate quoted under this item but supply of bleaching powder shall be measured and paid separately.

Demolition of cement concrete (reinforced) as in cover slabs of any description and in any position not other wise specifically provided for complete all as specified and directed

M&L for pre cast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs and set in cement mortar 1:4 including necessary form work complete all as specified.

M&L for mild steel TMT bars 8mm dia as in reinforcement cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia) complete all as specified.

M&L for Reinforced concrete pipes, class NP2, 450mm bore laid and jointed complete with collars as specified and directed by Engrs in charge.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thick (below or above ground level) copmlete all as specified and directed

M&L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate as in coping, bed plate, fillets and similar works including rounded or chamferred on edges including necessary form work complete all as specified.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in plinth protection/footpath, surface to be finished even and smooth without using extra cement including laid in alternate bays and joint to be filled with bitumen filler complete all as specified and directed

M&L chequred cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade,with grey cement and pigment.complete all as specified and directed

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete all as specified and directed

M&L for 15 mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for 20 mm thick rendering in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately)

Supply only water proofing compound (integral) complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of primer on wall etc complete all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing complete all as specified and directed

M&L for preparing old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke spot ,moulds ,moss and efflorescent salt and trading oil and gressy spots and applying one coat of white wash on walls.

All as per item 26 above but on ceiling

M&L for applying 1-2mm thick wallcare putty on wall surfaces complete all as specified and directed

M&L complete removal of existing treatment from the walls and applying two coats of distemper oil-emulsion over one coat of priming paint of surfaces all as specified and directed

M&L for preparing old decorated surface of walls, including washing, rubbing down and stopping of distempered surface and applying one coat of distemper (oil emulsion) of any tint on walls all as directed by Engineer-in-Charge.

M&L for preparing old decorated surfaces and applying one coats of cement base paint on wall complete all as specified and directed

M&L complete removal of existing treatment and applying two coat of weather exterior emulsion paint over one coat of primer on wall etc complete all as specified and directed.

M&L for preparing old wooden surfaces of any description exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as spd and directed

All as per item 33 above here in before but on steel surfacees.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified..

M&L for brick work with Fly Ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified.

M&L for brick work with Fly Ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains, including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Taking down wooden chowkats or frames with shutter ( without taking off shutter from the frames ), area n. exc. 1.5 Sqm each and removal from site including cutting of holes for removal of hold fasts and making good using new bricks complete all as specified.

All as per item No 40 here in before but area exc. 1.5 Sqm and n. exc. 4.00 Sqm each complete all as spd.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc complete as specified, Size of frame 125 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified and directed.

M&L for Providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregates) filling in pressed steel frame and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex stones, bed plates complete all as specified and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ,30 mm thick complete all as specified and directed.

Supply and fixing IInd class hard wood factory made 30mm thick glazed skelton shutters (Three panel), open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F for mild steel framed work as in door chowkats /gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including providing one shop coat of zinc chrome primer complete all as specified and directed.

All as per item No. 50 hereinbefore but without glazing bars for gauzed shutter including providing one shop coat of zinc chrome primer complete all as specified and directed.

S&F 100 mm long stain less steel butt hinges all as specified

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long Aluminium handle cast type anodised complete all as specified and directed.

S&F mild steel stove enamelled black 300mm long ordinary rat tail rod pattern spring fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 200mm long, ISI marked, complete all as specified.

S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

S&F 200 mm long Aluminium handle cast type anodised complete all as specified and directed.

Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site all as specified

S&F mild steel square bar 12mm in grill or guard bars welded to steel window all as specified and directed.

S&F sheet glass ordinary quality 3mm thck and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeing 0.50 sqm in each pane complete all as specified and as directed.

S&F flat iron (mild steel) fillets fixed to fly proof steel window shtters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete all as specified and directed.

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified.

M&L for applying two coats of synthetic enamel paint over newly primed steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

S&F in repairs vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests "P" or "S" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified.

S&F in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified.

S&F in repair PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified.

S&F in repairs CP brass towel rail 60cm long including fitting complete all as specified and directed. Cat Part No.AEC-1111 of ESSCO or equivalent make given in list of make as approved by GE

S&F in repairs CP brass overhead shower 80mm dia round shape Cat No.EOS-541N of ESSCO or equivalent make given in list of make as approved by GE with and including CP brass shower arm 240mm long with wall flange Cat No.ALE 536A of ESSCO or equivalent make given in list of make as approved by GE complete all specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaing for re-fixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections including cleaing for re-fixing or removal to store complete all as specified.

Taking up or down 25 mm bore steel tubing and connections including cleaing for re-fixing or removal to store complete all as specified.

S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 liters n.exc 500 liters complete all as specified as directed.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 500 liters n.exc 1000 liters complete all as specified as directed.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 1000 liters n.exc 2000 liters complete all as specified as directed. Note for item No. 79.00, 80.00 & 81.00 (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures n.exc 5 cm high viz (as per example) "TANK CLEANED ON………….". "NEXT DUE ON ............................" (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank. (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the Contractor and the quoted rates are deemed to include for the same.

S& F 15 mm bore angle stop valve (male or female thread) cast copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairsMake :- ESSCO-cat no.DLX-526 or equivalent make given in list of make as approved by GE.

S&F in repair bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore. Cat No. DLX-511 of ESSCO or equivalent make given in list of make as approved by GE..

S&F in repairs 15 mm Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe and fixed in repairs Cat No. DLX-507 of ESSCO or equivalent make given in list of make as approved by GE.

S&F 15 mm stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capston head wall flange etc screwed down screwed for iron pipe and fixed in repairs Cat No. DLX-514B of ESSCO or equivalent make given in list of make as approved by GE.

S&F 15 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe and fixed in repairs

S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe and fixed in repairs

S&F 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe and fixed in repairs

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe and fixed in repairs

S&F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe and fixed in repairs

S&F PVC connection pipe 15 mm dia 450 mm long with PTMT nut fixed in repairs

S&F in repairs 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.5 mtr long tube with CP wall bracket including taking down the old one complete all as specified and as directed Cat No ALD -CHR-583 of jaquar or equivalent make given in list of make as approved by GE.

Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.

S&F PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed.

S&F in repair vitreous china pedestal stand white colour suitable for wash hand basin complete all as specified.

S&F waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms

S&F Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified.

S & F PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or floor of 110mm bore incl taking down old un-serviceable pipe complete all as specified and directed.

S & F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber rings joints fixed to walls or floor of 75mm bore incl taking down old unserviceable pipe complete all as specified and as directed.

S&F for PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

S&F for PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

S&F for PVC (SWR) 110mm bore Junction (Single T) equal or un equal provided with access door complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm bore plain with grating including jointed with solvent cement complete all as specified and directed.

S&F for PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete all as specified and directed.

S & F in repair plastic seat cover closed pattern with flat bottom and cover fixed with aluminium hinging device.

S&F in repairs towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F in repair Toilet paper holder of Vitreous china fixed to walls with chromium plated (CP) brass screws,

Excavation in post holes each not exceeding 0.50 cum, in soft / loose soil , getting out , returning , filling in and ramming earth or broken rubble mixed with earth arround, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface.

M&L P.C.C (1:3:6) Type C-2 (Using 40mm graded aggregate) as in foundation, filling and mass concrete.

M&L for preparition of new steel and iron surfaces of any description n exc10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (1st quality) over priming coat of red oxide primer complete all as specified and as directed.

S&F hard drawn steel wire fabric cut to lenghts, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement ,wt exc 4 kg

M& L for grouting 25 mm thick under stanchion bases or grillages ,RCC beams columns and chajja etc including any temporary shuttering to edges with cement mortar 1:2 to make good surfaces.

Removing moss grass ,roots ,sapling etc over RCC roof and spreading bleaching powder @ 0.5 kg /sqm and scrubbing with coir fibre and finally cleaning down with water.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE -290 Gde E-165 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness in roofs complete all as specified.

S&F pre- painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre- painted gavalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling ceiling board including cover fillets.

S&F Anodised aluminium snapgrid framework(size of grid 605x605 mm) for false ceilng all as specified and directed by engr in charge.

S&F Hangers 2.25 mm dia GI ( upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S&F 4 mm thick non asbestos fibre cement building (size 600 mm x600 mm) decorative type boards fixed or laid / insertedto timber/ GI/Aluminium framework with screws as in ceiling and fixed.

Roughening surfaces of existing roof treatment and taking out old APP membrane and removing from site including cleaning and washing down with water to remove dust etc complete all as directed.

M&L for laying and providing of water proofing treatment over RCC roof all as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighting not less than 150gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given one coat of Aluminium paint @ 0.11 Kg/Sqm on top of APP for heat resisting as per manufacturer instruction. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / M/S PIDILITE INDUSTRIES/ IWL INDIA LIMITED (HYPERPLAS)/CHOKSEY CHEMICALS PVT. LTD.

M&L for 10mm thick rendering in Cm (1:4) over RCC roof surface to receive roof treatment finished even and smooth with out using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.

M&L for point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC casing caping of required size (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 132 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 132 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.00 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.00 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No - 132 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.

M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.

S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED retriofit tube 21 watt with Al extrudedbatten luminaire for 230 volt AC,including LED tube 21 Watt complete all as directed by EIC Make ;Philips Cat Ref-BN021CLED20SPSUCWGRS2 or equivalent in Bajaj / Havells / Crompton/Sury/C&S.

S&F in repair LED street light of capacity 8 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete all accessories with connections PVC copper wire not exc 5 mtr and all as per model No. Make- philips BRPO22 LED 10 CW MR S1 PSU GR or equivalent to C&S/Havells/Surya/Bajaj/Crompton.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED retriofit tube 10 watt 2 feet with Al extrudedbatten luminaire for 230 volt AC,including LED tube 10 Watt complete all as directed by EIC Make ;Philips Cat Ref-BN021LED10S-6500PSUGRS1 or equivalent in Bajaj / Havells / Crompton/Surya/C&S.

Taking down ceiling fan, exhaust fan and wall fan from any location and any height, removing fan blades and caried to workshop for repair/rewinding and refixing the same after repair all as directed by EIC. (Note- Cost of repair/Rewinding will be measure and paid separatly under relevant items).

M&L for rewinding of ceiling fan of size 1200/1400mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same all as directed by EIC.

M&L for rewinding of exhaust fan of size upto 300mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model, reassembling and testing complete all as directed by EIC.

Supply only ball bearing No 6201 for ceiling fan including taking out old & UNSV complete all as directed. Make- SKF/NBC/Tata.

Supply only ball bearing No 6304 for exhaust fan/wall fan including taking out old worn out complete all as directed Make- SKF/NBC/Tata.

Supply only capacitor 2.5 mfd complete all as directed Make- EPCOS/ASIAN/CG.

Supply only capacitor 4 mfd complete all as directed Make- EPCOS/ASIAN/CG.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.

S&F in repair energy efficient, 5 star rated ceiling fan 230V 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed. Make: Havells/Usha// Crompton/Khaitan.

S&F in repair exhaust fan AC, single phase, 230/240 V, of size 300 mm seeep steel/aluminium metal body incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete. TURBO LD EXH FAN DBB-G GREY of make usha or equivalent of Havells/Khaitan/Crompton.

Taking down geyser of any capacity horizontal or vertical for repair/over hauling/replacement of unserviceable parts and disconnection of electric/ water supply lines and refixing the geyser in serviceable condition after assembling & reconnecting the electric & water supply line including testing complete as specified and directed. (Note-Unserviceable spare parts required to be replaced shall be measured and paid separately as 'Supply only')

Supply only heating element of geyser 1.5 KW any shape "ISI marked" . Make : Bajaj/Recold/Venus or equivalent make as approved by the GE.

Supply only heating element of geyser 2 KW any shape "ISI marked" . Make : Bajaj/Recold/Venus or equivalent make as approved by the GE.

Supply only thermostat for geyser 300mm long ISI marked . Make - Bajaj/Recold/Venus or equivalent make as approved by the GE.

Supply only indicating lamp (Red/Green) any shape for geyser . Make : Bajaj/Recold/Venus or equivalent make as approved by the GE.

Labour only for taking down any unserviseable street light fittings/bulk head fitting and refixing after repair/replacement including retightening of loose connections with all accessories of any type and size from existing position/location and removing materials to store for keeping in safe custody for repair work or taking credit all as specified and as directed. (Note: Items if required for repair work will be measured and paid seperately under relevant items)

S & F including taking down existing, new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium roadway luminaire with high power LED as light source lamp type 70W with SPD, IP 66 including taking down old damaged fittings from existing position on pole(9/11mtr)/ wall/ tower, complete all as specified and as directed. Make: Philips, CAT REF: BRP062LED82CWSLAS1PSU or equivalent model of Surya/Bajaj/Crompton/Havells.

Supply and fixing including taking down existing u/s silicon filled moulded type weather proof LED driver suitable for 60/72W LED street light fittings, driver operating voltage should be 140V-270V, 50 Hz, PF>0.9 of make philips or equivalent models of Havells/C&S/HPL as approved by GE.

S&F electronic ballast including taking down existing u/s for T5 fittings THD<33% and 2x24W capacity of make Havells cat part no: LHBT01224034 or equivalent makes all as directed and specified.

S&F including taking down existing u/s T5 high efficiency/high output FTL lamp of 24W capacity for T5 fittings of make Havells cat part no: LHST27124699 or equivalent makes as given in list of make all as directed and specified.

S&F in repair LED garden spike light 7W 360 lm, with dust jet water protection including taking down old u/s and making necessery connections all as specified and directed.

Repair of LED Garden Light 9 watt and replacement the diffective part i.e holder/diode / LED including all accessories and repair of u/s Wire any size connected to garden light all as specifed and directed .

M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.

Supply and fixing thermoplastic cable junstion box having protection IP 66/67 "weather proof" for outside installation with knockout entry for cable of size 10 - 16 sqmm and 155x210x92mm with terminals and provision of one 16A MCB SP all as specified and as directed.

Supply & Fixing vertical TP&N DB 4 way with sheet metal enclouser 415 volts, double door 200 Amp rated bus bar for MCB incl cutting chases exc 10 cm but not exc 20 cm girth for DB and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 8 way with 200 Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 4 way with 200 Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

S&F MCCB 63Amp four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as directed.

S&F MCCB 40Amp four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as directed.

Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.

S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete Cat No. 4086 28-36 of Make Legrand or equivalent in L&T/Seimens/C&S.

Material and labour for sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including surface PVC casing caping medium grade with all fittings and fixings accessories complete all as specified and as directed.

Material and labour for sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surfacesurface PVC casing caping medium grade with all fittings and fixings accessories complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia light grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Dismantling PVC water tank of capacity Exc 250 Ltr and not Exc 500 Ltr

S&F Rotational moulded polyethelene water Storage tank 500 Ltr capacity double layer (Cylinderical vertical with close top) hoisd and fixed in position all as specified in SSR-I

S&F 20 mm bore ball valves high Pressure of PTMT with epoxy coated aluminium rod and high Density plastic ball for iron pipe.

SRI SURAJIT SENGUPTA