NIT NO. 17(M-3)ITEM NO. 13

S/O Energy saving environmental friendly, long life, exclusive innovative pressure die cast aluminum bay light with high power LED as light source 70/72 watt LED light fitting etc. complete as required for fixing on the wall. Make: Bajaj / Havells / Philips / Approved by DJBSOR 19.10.6

S/o 18Watt LED tube light batten fitting make: Havells/ Crompton/ Bajaj/ Philips. SOR 19.1.1

S/O 40 mm dia G.I. pipe of 1 meter length with 1500 angle band, suitable for fixing of 80watt LED street light along with clamp, Nut & Bolt etc.

Supply of 2x10 sq. mm PVC insulated & PVC sheathed Aluminum armored conductor cable confirming to IS: 1554 (Part-i) complete as required. Make: - Gloster, Grandlay SOR 18.8.5

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. Make : - Havells / Gloster / Grandley / Approved By DJB SOR 18.9.8

Inverter Governing specification Generally conforming to IS:13314 Rating in KVA & Min. VAH Capacity of Battery 1 KVA/ 4320 VAH Technology MOSFET-PWM Energy Star Rating 5 Star Trolley with trolley Type of BatteryTubular battery confirming to IS:13369 Backup time (Minutes) Minimum 180 Minute

Lead acid batteries for Light Weight and Performance conforming to IS: 14257:1995 latest BIS Marked NO BIS Marked if ''YES" declare BIS License Number (CM/L Number) If "NO" write NA NA Battery Voltage12 Volt Rated capacity (in Ah) 5-h Rate/Maximum Overall dimensions in mm (Length x Width x Container Height)/Battery Height 120 Ah/ 508 x 222 x 213/ 257 Material of Container and Lid Polypropylene Separator type Envelope with glass

Wall fans 400mm Make:- Approved by djb SOR 20.4.1

Pedestal fans:- Make:- Approved by djb SOR 20.5.2

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, Single pole, make L&T / Havells / C&S / Approved by DJB SOR 32.10.1

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (2 + 16), Double door. SOR 32.3.4

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 A, L&T / Havells / C&S / Approved by DJB SOR 32.12.1

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. SOR 31.41

Installation Testing & Commissioning of 70/72 watt street light, wiring, connect with MCB with grouting of bolt at walls etc

Installation, testing and commissioning of Inverter and batteries including fitting of all types, complete with all accessories and connection with 1.5 sq. mm FRLS PVC insulated copper conductor, single core cable to all equipment as per site requirement and engineer in charge and all allied works including all accessories.

INSTANT TRADE CORPORATION