Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC 79 O P ROAD NAYABASTI BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹50.3 L+₹55,171.41 (1.11%)Rejected-AOC 79 O P ROAD NAYABASTI P O P S BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-AOC NOT L1 BIDDER | |
| 3 | L3₹50.8 L+₹1.1 L (2.22%)Rejected-AOC 01 BALIA BALIA SAGARDIGHI MURSHIDABAD WEST BENGAL 742237 | MURSHIDABAD | WEST BENGAL | 742237 | L3 | Rejected-AOC NOT L1 BIDDER | |
| 4 | L4₹51.4 L+₹1.7 L (3.33%)Rejected-AOC VILL KONGORERAIMA PO KONGORERAIMA PS ANANDAPUR BLOCK KESHPUR DIST PASCHIM MEDINIPUR PIN 721122 WB | MEDINIPUR WEST | WEST BENGAL | 721122 | L4 | Rejected-AOC NOT L1 BIDDER | |
| 5 | L5₹51.9 L+₹2.2 L (4.44%)Rejected-AOC | L5 | Rejected-AOC NOT L1 BIDDER |
Tender Value
₹47.9 L
EMD Value
₹95,820
Closing Date
21 Oct 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA - 50
PROVN OF STREET LIGHTS FOR CHORD LINE AND MU CAMP AND CERTAIN REVENUE AND MINOR WORK AT KANKINARA AREA UNDER GE (NORTH) KOLKATA
2024_MES_676772_1
8387/24-25/E8 (GE(N)/KOL/ OF 2024-25)
Open Tender
Miscellaneous Works
Item Rate
210 days
KANKINARA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹95,820
Yes
19 Nov 2024
27 Sept 2024
22 Oct 2024
28 Sept 2024
21 Oct 2024
14 Oct 2024
Amount
Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of cable,foundation etc and getting out in soft/loose soil complete all as specified and as directed.
All as per Item No. 1 above, but depth exceeding 1.5 m and not exceeding 3.0 m complete all as specified and as directed.
Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and directed. (Note:- Punned depth only shall be measured and paid)
Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in foundation , filling and mass concrete for bases of pole , etc complete all as specified and directed
Material and labour for PCC (1:3:6) type C-2, (using 40 mm graded stone aggregate) as in foundation , filling and mass concrete for pole etc complete all as specified and directed
Material and labour for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in coping of poles, repair of platform for Panels / Feeder Pillar Boxes, foundations etc including necessary form work complete all as specified and directed.
Supply and fixing, commissioning, testing XLPE insulated, PVC sheathed armoured heavy duty electric cable of size 10 sqmm 4 core, with aluminium conductor for working voltage upto and including 1100 volts, in duct / trenches, fixed to pole, wall/roof and make good distrubed surface including cable glands of required size of aluminium thimble for making connection complete all as specified and directed.
All as per item No. 10 but of size 10 sq mm, 2 core complete all as specified and directed.
All as per item No. 10 but of size 6 sq mm, 2.0 core complete all as specified and directed.
Supply and fix galvanised iron pipe in 40 mm bore, light grade for protection of UG cable laid in trenches / fixed to pole with MS clamp,nut, bolt etc complete with all fitting such as socket or any other item required for fixing of pipe complete all as specified and directed. (Note :- MS clamp, nut, bolt etc required for fixing the pipe with pole shall be deemed to be included in the quoted rate).
Supply and errection steel tubular swaged welded poles 9.0 m long conforming to IS-2317/1980 type 410 SP-31 complete with cast iron base plate final taper plug, bolts, nuts and screws etc including two coats of aluminium paint over a coat of red oxide primer, zebra painting upto 1.5 mtr height in yellow and black colour strips in alternate layers of 150mm width complete including taking out damaged steel tubular pole and PCC work complete all as specified and directed. (NOTE : Earth work and PCC work for base and coping shall be measured and paid separately)
Supply and fix LED STREET light 90 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 90 Watt with lens including all fixing arrangement required to fixed with pole/ wall on existing bracket or wall including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPBL090C / Philips Cat part No. - BRP 410 LED 092 CW HE NR FG S2 PSU GR / Wipro Cat part No. - LR02-102-XXX-57-XX/ Surya cat no SLEUL90WLXN or equivalent make of Havells/Bajaj/ Crompton/ Bentec
Materials & labour for earthing with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4.0 mm dia of by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe(light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and as directed.
Supply and fix MCB single pole 6 to 32 Amps, 240 volts, 'C' series breaking capacity 10 KA, with all incoming / outgoing connections with proper size of lugs including taking down the old unserviceable MCB complete all as specified as directed.
Supply and fix cable junction box of inside dimension 250 x 200 x 100 with provision of 4 Nos aluminium bus bar of size 25x5mm/ connector for cable of suitable size to be fixed on pole/ wall/ angle with suitable size of clamp, nut bolts and washer, angle etc required at site for fixing of junction box complete all as specified and as directed. (Make - Hensel/ Syntex/ National)
Supply, fixing, installation and testing of Street light automatic timer switch panel digital type timer switch 3 phase of capacity 65 A contractor/ 63 A TP including all connection to be fixed on LT panel/ wall complete with electrical connection with existing electric supply with suitable size of cable and testing after installation complete all as specified and directed.
Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens including all fixing arrangement required to fixed with pole/ wall on existing bracket or wall including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Philips Cat part No. - BRP 409 LED 040 CW HO MR FG S1PL PSU GR / Wipro Cat part No. - LR02-501-XXX-57-XX/ Surya cat no SLEUL45WLXN or equivalent make of Havells/Bajaj/ Crompton/ Bentec
Materials & labour for painting to Steel Tubular poles from the ground level with one coat black bituminous paint up to a height of 1.50 m and zebra painting upto 1.5 mtr height in yellow and black colour strips in alternate layers of 150mm width complete and balance portion upto top with one coat of aluminium paint including preparation of old painted surfaces complete all as specified and directed (Approx height of pole:7.50m above ground).
Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 2.5 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).
Material and labour for street light fitting bracket, made out of 40 mm bore GI pipe, light grade of length not less than 1.20 mtr, 45 degree bend to shape and fixed on pole with 2 nos FI clamps of 40x5mm of suitable length made shape of pole , bolts, nuts & washers complete all as specified & directed.
Supply and installation of Hi wall split Air conditioner units indoor and outdoor inverter type complete with cordless remote control unit including all necessary connection with copper piping, drain pipe, holes on walls and making the surfaces good as per existing and with inbuilt air ionizer and plasma filter for better air quality with 5 star rating of capacity 1.5 TR complete all as specified and directed.
S&F voltage stabilizer of 5 KVA for automatic operation single phase naturally air cooled indoor type and designed for input variation between 150 to 285 V with output voltage stabilizer at 230 V with accuracy of +/- 2.5 % complete all as specified and directed.
Matetial and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 4 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).
Matetial and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 6 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).
S&F sheet metal enclosure SPN with two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' series and breaking capacity 10 KA, 240 V complete all as specified and directed.
M&L for stand / bracket fabricated from structural steel section suitable for 1.5 Ton / 2.0 Ton AC outdoor unit including nut, bolts, washers, welding if required, bedding cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat and one under coat and one finishing coat of paint complete all as specified and directed.
Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 450 mm sweep, 1400 RPM, metal body with louver including making holes to the existing wall for fixing exhaust fan with fastener, clamps etc required as per site and making good surfaces as per existing all as directed.
Supply and fix in repair powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 8 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed.(Note: Chases cutting and making good the disturbed surfaces to match with the existings shall deemed to be included in the quoted rate)
Supply and fix MCB single pole & neutral 32 Amps, 240 volts, 'C' series breaking capacity 10 KA, with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
Supply and installation of Hi wall split Air conditioner units indoor and outdoor inverter type complete with cordless remote control unit including all necessary connection with copper piping, drain pipe, holes on walls and making the surfaces good as per existing and with inbuilt air ionizer and plasma filter for better air quality with 5 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed.
Supply and fix pedestal fan 450 mm sweep, metal body, 3 speed operation, 100w, 1500 RPM , 230V, AC 50 Hz, 1 with oscillation and tilt mechanism and mounting accessories complete all as specified and directed.
Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including painting one shop coat of zinc chromate primer paint (including preparation of surface) before fabrication complete all as specified and directed.
Supply and fix rolled mild steel section as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including painting one shop coat of zinc chromate primer paint (including preparation of surface) before fabrication complete all as specified and directed.
Supply and fix rolled mild steel Plates (plain or chequered), 5mm thick, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including painting one shop coat of zinc chromate primer paint (including preparation of surface) before fabrication complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in Ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix 0.80 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.
Supply and fix UPVC pipes 110 mm bore type 'A' single socketed in any length with rubber ring joint fixed to walls with and including PVC brackets complete all as specifed and directed.
Excavation in post holes ( or similar holes) each n exc 0.5cum, getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed.
Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed
Supply and fix rolled mild steel section as in Joist, channel, angle, or tee sections, Fe 410 -W(Gde-E- 250)quality-A, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated including painting one shop coat of zinc chromate primer paint (including preparation of surface) before fabrication complete all as specified and directed.
Supply and fix mild steel flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire,etc.; flat iron fillets( for securing wire mesh etc.) including all necessary dilling , bolting or riveting etc; and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Supply and fix mild steel 5-10 mm diameter of shank screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15 cm but n. exc 22.5 cm long complete all as specified and directed. (Bolt to be embeded into RCC fencing post while casting)
M&L for polycarbonate sheet 10 mm thick heat resistance and coloured complete all as specifide and directed by Eng-in-Charge.
ALOKE ENGINEERING AND COMPANY (BID ID -3145242)
DAS ENTERPRISE (BID ID -3145611)
S M ENTERPRISE (BID ID -3145153)
SANDIP CONSTRUCTION (BID ID -3145391)
Friends Trading Co (BID ID -3144864)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .