REPAIR REPLACEMENT OF VARIOUS STEEL FURNITURE AND CERTAIN TRADE PATTERN FURNITURE OF MD ACCN AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

(CHAIR VERANDAH)Remove of old caning from the steel frame of chair varandah and making the frame by means of welding wherever required to bring its in original shape as per drg.(Drg no.-FD-19 (M))

De-rusting/cleaning the iron frame to smooth surface and painting all steel surface with two coat of synthetic enameled white paint over a coat of red oxide primer to bring the surface with glossy finish and re-caning the same with 4mm white plastic cane oval shape as approved by Engr-in-charge and as per drg and providing the new rubber shoe complete.(Drg no.-FD-19 (M))

(TABLE BED SIDE STEEL)Removing decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination. Standard PVC edging 1.6mm whick shall be provided all-around the top of table bed side all as shown on drawing. (Drg no.-FD/E6/MAP/15 ( R ))

Removing decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood BWR grade of required size all as shown on drawing. (Drg no.-FD/E6/MAP/15 ( R ))

Removing decayed drawer and replace the drawer made out from 12mm thick prelaminated particle board one side decorative of front, side and back made out of 12mm thick plywood BWR gde and bottom shall be made out from 6mm thick plywood BWR grade of required size with teak wood beading all around as approved by Engineer-in-Charge and rest all as shown on drawing. (Drg no.-FD/E6/MAP/15 ( R ))

S & F for 100mm aluminium handle of existing pattern after removing of old unserviceable / broken handle from its existing position complete all as directed and shown on drawing. (Drg no.-FD/E6/MAP/15 ( R ))

Removing of each decayed hard rubber / pvc ring from its existing position of Table bed side and replace the same with new hard rubber / pvc ring all as shown on drawing and directed by Engineer-in-Charge. (Drg no.-FD/E6/MAP/15 ( R ))

De-rusting/cleaning the frame of table to smooth surface and painting all steel surface with two coat of synthetic enameled Black paint to bring the surface with glossy finish. (Drg no.-FD/E6/MAP/15 ( R ))

(CHARPOY GI PIPE 32 MM NYLON NEWAR)Remove the existing Nylon Newar and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.(Drg no.-FD-220)

Supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe (Each check nut will be measured as single unit).(Drg no.-FD-220)

Removing the existing unserviceable broken 3 way GI elbow and S & F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit),(Drg no.-FD-220)

Removing the existing unserviceable/broken long rail and S & F new long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL).(Drg no.-FD-220)

Removing the existing unserviceable/broken short rail and S & F new short rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL).(Drg no.-FD-220)

Making legs out of unserviceable long/short rails obtained from item 04 and 05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.(Drg no.-FD-220)

Supply & fixing short rail of size 25mm at middle position in charpoy with iron clamp by screwed/welding.(Drg no.-FD-220)

(CHARPOY FOLDING IP WITH HARDTOP)Remove the existing unserviceable Ply wood from Charpoy Folding IP with hard top and making the frame to its original position by tightening/welding etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.(Drg no.-FD-388)

Removing unserviceable check nuts and supply & fix new nuts in charpoy IP Folding Hard top of existing shape and size and as directed by Engr-in-charge.(Drg no.-FD-388)

Removing unsv Pipe and S&F new pipe for legs/short/long rail of Charpoy IP Folding Hard top of existing shape and size and as directed by Engr-in-charge.(Drg no.-FD-388)

De-rusting/cleaning the frame of Charpoy IP Folding with Hard top to smooth surface and painting all steel surface with two coat of synthetic enameled OG Paint over a coat of Red Oxide primer to bring the surface with glossy finish.(Drg no.-FD-388)

(CHARPOY IP WITH HARD TOP)Remove the existing unserviceable Ply wood from Charpoy IP with hard top and making the frame to its original position by tightening/welding etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.(Drg no.-FD/MAP-11/01)

Removing unserviceable check nuts and supply & fix new nuts in charpoy IP Hard top of existing shape and size and as directed by Engr-in-charge.(Drg no.-FD/MAP-11/01)

De-rusting/cleaning the frame of Charpoy IP with Hard top to smooth surface and painting all steel surface with two coat of synthetic enameled Black Paint over a coat of Red Oxide primer to bring the surface with glossy finish.(Drg no.-FD/MAP-11/01)

(CHAIR LOW BACK WITH ARM CUSHIONED/CHAIR REVOLVING WITH ARMS)S&F New Seat of chair low back with arm cushioned/chair revolving with arms made out of high density cooled foam of existing size including all seat portion covered with tepestry cloth , All as per sample and directed by Engr-in- Charge.

S&F New back of chair low back with arm cushioned/chair revolving with arms made out of high density cooled foam of existing size including all seat portion covered with tepestry cloth , All as per sample and directed by Engr-in- Charge.

S&F New handle of chair low back with arm cushioned/chair revolving with arms made out fibre/ plastic as per sample and directed by Engr-in- Charge.

S&F New wheels made out fibre/ plastic and including of repair to the hydralic system wherever required to the chair revolving with arms as per sample and directed by Engr-in- Charge.

De-rusting/cleaning the frame of chair low back with arm cushioned/chair revolving with arms to smooth surface and painting all steel surface with two coat of synthetic enameled Paint of existing colour to bring the surface with glossy finish as directed by Engr-in-charge.

(SHOE CABINET)M&L for removing the worn out/unserviceable and replacing the same with the new parts as per sample :- Notes :- Supply only parts for replacement will be measured and paid separately under respective items.

Hinges as per sample.

Back Panel as per sample.

Bottom Panel as per sample.

Door LH side as per sample.

Door RH side as per sample.

Front Skirting as per sample.

Intermidate Pannel as per sample.

Side pannel LH side as per sample.

Side pannel RH side as per sample.

Shelf horizontal as per sample.

Top cushion as per sample.

Top pannel as per sample.

Hardware packet for repairing as per sample.

P .BANERJEE AND CO (BID ID -3328831)

LALAN SHARMA (BID ID -3333037)

M/S Subhadip Enterprise (BID ID -3328382)

M/S New Builders Corporation (BID ID -3329007)

M/S SINGH ENTERPRISE (BID ID -3328083)