Construction of U.M.S Bahiyar Khurd 6 Class Room, B.wall, Kitchen Shed and Toilet Block Ramna Under Garhwa Distt.

Amount

Earth work in excavation in foundation trenches in ordinary soil with all complete job.

Extra for earthwork in hard soil as per specification and direction of E/I.

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and

Providing coarse clean sand in filling in foundation with all complete job.

Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring ,

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring ,

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes an

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excl

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Weather shade, Chajjas, corbels etc., including edges

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all com

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in po

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

(c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification an

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applyi

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75B one brick flat soling with all complete job.

Providind 150mm thick Dry rammed khoa beaten to 112mm with all complete job.

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost o

Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.

(a) Grey colour with 100% ordinary cement

Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab incl

With "A" grade white 15X15cm Tiles.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete a

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffold

Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes al

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffol

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the

Supplying, fitting and fixing C.A.R.W.D. Pipe with necessary strips spikes, bends, shoes etc. Including cost of carriage, all complete, as per building specification and direction of E/I.

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible

Covering of treated surface with PCC :- Providing 25 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm

Providing and filling of 6 mm thickGroove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as per drawings and technical specifications and direction of E in Charge.(with 18%

Carraige of materials by truck or any other mechanical means with all job complete .

(A) Bricks (1+7) K.M

(B) Local sand (up to 3 K.M )

( C ) Coarse sand (up to 22 K.M)

(D) Stone Chips (up to 22 K.M )

(E) Metal (up to 22 KM )

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank , ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank

Supplying tools and making connection of new G.I distribution branch 15 mm dia with existing G.I main by providing and fixing G.I Tee including cutting of pipe at two place and threading their ends, providing long screw and one G.I Nipple, all complete as per specification and direction of E/I .

(a) 15 mm dia.

(b) 20 mm dia.

(c ) 25 mm dia.

Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I .

Cutting floor for laying G.I. pipe and restoring the same as per specification and direction of E/I.

Providing and fixing male ended 15 mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/ I.

Providing and fixing brass/C.I stop cock of approved quality all complete as per specification and direction of E/I. 15 mm dia .

Supplying fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I.'p' trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C brackets 32mm alkathene/P.V.C. telescopic flush,pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long with 12.5 lit.low level PVC cistern

Supplying,fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc . all complete as per specification and direction of E/I.

Providing & laying 110 mm dia. PVC pipe for outlet of water outlet drain including all accessorise i.e solvent cement, clamp, ring. Socket etc.(Supreme make)

Supplying and fixing G.I fittings of approved make all complete as per specification and direction of E/I.

(A) ELBOW

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(B) TEE PLAIN

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

© REDUCING SOCKET

(ii) 20 mm dia.

(iii) 25 mm dia.

(D) NIPPLE

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(E) PLUG

(i) 15 mm dia.

(ii) 20 mm dia.

(F) SOCKET PLAIN

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(G) UNION SOCKET

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(H) BEND WITH SOCKET

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(I) REDUCING TEE PLAIN

(i) 20 mm dia.

(ii) 25 mm dia.

(iii) 32 mm dia.

(J) JAM NUTS

(i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/M.S box etc. as required.

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor , single core cable in and surface / recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor sigle core cable for loop earthing as required .

Wiring for circuit / sub main wiring alongwith earth wire with the following size of PVC insulated, copper conductor, single core cable in surface / recessed PVC conduit as required.

2x1.5 sq mm+1x1.5 sq mm

2x2.5 sq mm+1x2.5 sq mm

2x6 sq mm+1x6 sq mm

S/F 3 pin , 5 amp . Ceiling rose on the existing junction box / wooden block inclueding connection etc . As require .

S / F brass battan/ angle holder including connection etc. as requried

S/F of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required .

20 mm PVC conduit

25 mm PVC conduit

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connection etc. as requried .

5 / 6 amps, one way switch

3 pin 5 / 6 amps , socket outlet

Supplying and fixing metal box of following sizes(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required .

126 mmx277 mm x 61 mm deep

Supplying and fixing of following way sigle pole & neutral,sheet steel , MCB distribution board 240 volts , on surface / recess complete with loose wire box , terminalblocks,duly prewired with suitable size FR PVC insulated copper conductor upto the

2+8 way double door

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S ADITYA RAJ ENTERPRISES (BID ID -666573)

CHANCHAL KUMAR MISHRA (BID ID -666548)