PROVN OF OTM ACCN FOR DEMO BTY DEMO SQN AND AWC CAMP MHOW

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for (Building Work) as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II (External Electric Supply) Lump sum price worked out by the contractor for (External Electric Supply) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III (External Water supply) Lump sum price worked out by the contractor for (External Water supply) as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (Hard standing) Lump sum price worked out by the contractor for (Hard standing) as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (Road) Lump sum price worked out by the contractor for (Road) as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Sewage Disposal) Lump sum price worked out by the contractor for (Sewage Disposal) as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Area Drainage) Lump sum price worked out by the contractor for (Area Drainage) as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Lightning protection) Lump sum price worked out by the contractor for (Lightning protection) as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Water cooler & Refrigerator) Lump sum price worked out by the contractor for (Water cooler & Refrigerator) as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.

Sch 'A' Part-X (Hot water supply & Solar Hot water) Lump sum price worked out by the contractor for (Hot water supply & Solar Hot water) as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Demolition of bldg) Lump sum price worked out by the contractor for (Demolition of bldg) as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Sch 'A' Part-XII (Internal electrificatiion) Lump sum price worked out by the contractor for (Internal electrificatiion) as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES.

Sch 'A' Part-XIII (Internal Water Supply) Lump sum price worked out by the contractor for (Internal Water Supply) as listed in Schedule 'A' Part-XIII against the lump sum price inserted by the MES.

Note for Srl No 2 to 14 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 14 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XIII (Miscellaneous items of works)

Sewage Disposal

Item No 01 : M & L for Double Wall Corrugated Profiled HDPE Pipe 147mm -200mm ID and 175mm-230mm OD class SN-8 sewage pipe laying in ground.

(a) Bore of pipe 147 mm.

(b) Bore of Pipe 200 mm

External Electric Supply

Item No 02 : Supply and fixing Loop in loop out port box, size 200mmx200mm x150mm, made out of MS sheet of 3.0 mm CRCA sheet steel powder coated IP protection -IP-66,hinged door,cam locking arrangement system mounted on pole, consisting of 50 Amp, TPN, aluminiumbusbar, cable terminal,glands, making weather proof 01 No DIN rail and 01 NoMCB SP , 10KA, 6 Amps etc for terminating 4core, 16/25 sqmm 3.5C UG cables.and screw etc, painting and making test point and testing complete all as specified and as directed

Item No 03 : Supply and fixing 6 kW, single phase automatic street light controller or nature switch for automatic switching on / off street light , consisting of sensor, overload protection fuse gear, power contactor of suitable capacity and MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, shock proof, termite proof conforming to IP 54, with universal lock and key arrangement complete all as specified and as directed. Make Havells Cat Part No. IHX5501060 OR equivelent in CG /L&T

Item No 04 : Supply and fix LED Gate light fitting gate light in aluminum die cast with modern artistic design and white PC diffuser suitable with LED lamp B22. 1N x 7.5 W LED Filament / LED Lamp Model LHFOASE1TZ5W009 of Havells or equivelent CG/ Bajaj, IP65 including base plate complete with all accessories complete all as specified and directed.

Item No 05 : Supplying and laying HDPE pipe 110mm or 4 inch PN 10 for additional safety feature of anti rodency and non fame propagation and provid at lower depth for cable protcion in place of sand cusioning and cable cover comp all as specified and directed.

Item No 06 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of minimum size 1500mm x 1500mm x 600 mm (min size) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrangement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. Panel MCCB should be proper marked that MCB is connected for which bldg.Contractor will produce drawing for approval from GE before placing the order (For Demo Sqdn)

OUTGOING (a) MCCB 250 Amps 4 pole with, adjustable thermal magnetic release type, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos (b) MCCB 4 pole 160 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 No (c) MCCB 63 Amps , 4 pole adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links -02No.

Item No 07 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of minimum size 1500mm x 1400mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrangement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. (For Demo BTY)

OUTGOING (a) MCCB 250 Amps 4 pole with, adjustable thermal magnetic release type, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos (b) MCCB 4 pole 160 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 No (c) MCCB 63 Amps , 4 pole adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links -02No.

Item No 08 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of minimum size 1500mm x 1400mm x 500 mm (Min dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrangement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. Panel MCCB should be proper marked that MCB is connected for which bldg. Contractor will produce drawing for approval from GE before placing the order (For Demo Bty and Demo Sqdn cook house)

Item No 08(A) : Supply and fix Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade complete all as specified and directed. Make- Finolex/Havells/Polycab

External Water supply

Item No 09 : M& L for cutting of CI pipe 80 / 100mm dia for inserting 20 to 50 mm dia GI pipe complete driled,welded and screwing Nut, bolts with MS clamp welded with GI socket 20/50mm dai and fittings including complete earth work.

Item No 10 : M&L for Construction of brick masonry valve pit of size 900mm x 900mm x 900mm (internal dimensions) one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 6.0mm thick MS sheet valve pit cover, welded with 40 x 5mm flat iron frame around including provision of hinges, handle and locking arrangement and 40 x 40 x 6mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long embedded in PCC 1:2:4 (20mm graded aggregate) Block size 230 x 200 x 100mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary excavation & Earth work in soil complete all as specified

Water cooler & Refrigerator

Item No 11 : Supply & fixing heavy duty Desert cooler min 4500 cum/hr(peak), 3200 cum/hr (avg) with PVC body, directional front grill of suitable size, having air throw min 60 feet, submersible pump, anti bacterial technology pads, with 3 level speed control, with ice chamber, turbofan technology with castor wheels, bottom water tank capacity not less than 80 litres complete all as specified and directed by GE. Note : Contractor shall provide warranty of 02 years for product & pump and is liable for defect rectification during this period. Make- Symphony or equivelent in Voltas/Blue star

Demolition Bldg(E/M)

Item No 12 : Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No. 13 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

FURNITURE

Item No. 14 : Chair Easy Drg No. FD-229 (a) All wood work shall be first class Hard MP teak wood well seasoned of 1st quality shall be used and free from knots and cracks. (b) Canning shall e with 2 mm wide plastic cane half round approved quality as details shown on drg in Godrej Pattern with 4mm wide on top be provided as broder to cover the hoies. (c) PVC/rubber rings shall be provided to the bottom of the legs with 20 mm long brass screw with steel washer. (d) All joints and fixing shall be done in accordance with standard workmanship and specifications. (e) Holes for weaving plastic cane shall be @ 12.5mm c/c. (f) Rest all as per drawings and as directed by Engr-in-Charge.

Item No. 15 : Chair Writing Steel Drg No. FD/E6/MAP/12 (a) The frame shall be of MS 25mm x 10 mm tubular section. Seat and back shall be made of 120mm thick hot pressed plywood upholstered with fabric and moulded polyurethane form with PVC lipping all round. (b) The polyurethane foam shall be 50mm thick. (c) Arm rest made of polyurethane with 75-85 share 'A' hardness and rainforced with MS insert and shall be scratch and weather resistant. Both hand rest sections to gave slope towards front as shown as drawings. (d) Cantilever type powder coated MS tubular frame made out of 25mm x 10mm section. Rubber stopper of 1st quality shall be provided at bottom. (e) Rest all as per drawing.

Item No. 15(A) : Table office clk steel Drg No. FD-1004 : All as shown on drawing, Overall size shall be 1200 mm long, 600mm wide and 760 mm heigh, Legs shall be made of 25mm square tube of wall thickness 1.6 mm mild steel sheet. The table top shall be of 18 mm thick prelaminated particle baord confirming IS standard with PVC lipping all row the top on one side and coats of enamal paint over a coat of primer after preperation of surface, Painting shall be done with spray machine.

Item No. 16 : Stool Steel 600mm Drg No. FD-81 : All as shown on drg. Overall size shall be 305x305x510 mm. Stool shall be made out of 1 mm thick MS sheet as shown on drg. All mild steel surface exposed to view shall be spray painted finished with two coats of synthetic enamel paint over a coat of red oxide preimer, shade as approved GE/Engr-in-Charge.

Item No. 17 : Ladder Aluminium Drg No. FD-1025 : All as shown on drg. Two aluminium stringers 60mm x 31.75mm made in 'C' Shape and 3.18 mm thick aluminium shall be 2310 mm long and joined together with aluminium rungs of aluminium faulted pipe rungs ends bent to shape as shown of drg. Eight aluminium rungs of aluminium conduit pipe of wall thickness not less 2.43 mm shall be eqally spacesd after leaving 150mm from bottom and top. Overall size of aluminium ladder shall be 2310 mm long and 363.5mm wide.

Item No. 18 : Durrie 12'x9' Drg No. TP : All as per trade pattern. The Durrie shall be of best quality overall size 12'x9' rest as directed by Engineer-in-Charge.

Item No. 19 : Table 900 mm x 900 mm Steel S/Top Drg No. FD-1009 : All dimensions and details shall be as shown on Drg. Legs and frame shall be of 25 mm squire MS tube 1.6mm wall thickness. Table top shall be fo 18/19 mm thick prelaminated particle board confirming to IS-3087. Standard PVC beading of best quality shall be provided to edges of table top as per details shown on drgs.

Item No. 20 : Table 900 mm x 600 mm Steel with drawer Drg No. FD-1008 : Top shall be of 18 mm thick prelaminated particle board. Over all size shall be 900 mm long 600 mm wide and 760mm height, steel frame shall be of 800 mm x 500mm x 742mm, four legs shall be of 25 mm square MS tube of wall thick 1.6 mm. Rest all as shown on drg. All steel surface shall be spray with two coat of synthetic enamel paint.

Item No. 21 : Table 900 mm x 600 mm Steel without drawer Drg FD-1007: All as shown on drawing. Overall size shall be 900mm x 600 mm x 760 mm, Four legs shall be of 25 mm square mild steel tube of wall thick 1.6 mm, Top of legs shall be joined toghether with 25 mm square mild steel tube of wall thick 1.6mm on log and short sides, Top of the table shall be of 18 mm thick pre-laminated particle board with one side face and pvc edging all round the top of table, rest all as directed by Engineer-in-charge and GE.

Item No. 22 : Teapoy Drg No. FD-382 (a) Overall Size 450mm x 540mm high. All wood work shall be first class Hard MP teak wood well seasoned of 1st quality shall be sued and free from knots and crackes. (b) Top shall be pre-laminated particle board 18mm with 4mm thick half round TW/PVC lipping edging all round top sall be provided. (c) Irrespective of what shown on drg, one TW centre and side stiffeners in between the legs shall be provided. (d) All joints and fixing shall be done in accordance with standard workmanship and specification. (e) Eight numbers wooden corner shall be provided joining legs with top rails. Wooden corner shall be fixed with two screws. Rest all as per drg or as directed by Engineer-in-Charge.

Item No. 22(A) : Form with Back Drg No. FD-78 : All wood work shall be 1st class hard wood MP teak, as shown on Drg. All Steel work shall be with good workmanship and finishing. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 23 : Receptacle PVC 75 Ltrs Drg No. FD/E6/MAP/13 (a) Receptacle (Cap 75 Ltr) shall be made fo thick polymer plastic as shown on drgs. Make Cello/Brite/Milton. (b) Plastic container with lid and handles in bright colour as approved by GE/Engr-in-Charge.

Item No. 24 : Locker Steel Drg No. FD-257 (a) Over all size shall be 760mm long, 600mm wide and 1100 mm high. (b) All CRC shall be 1mm thick. Two legs shall be provided to locker as shown on drg and hard rubber/PVC shoes of not less than 4mm thick shall be provided. (c) Top, side, back, front and shelves shall be of CRC sheet of 1mm thick. (d) One SS handles, 100mm long fixed with nut & bolts as suitable size to shutters. (e) A three way locking device shall be provided to front shutters ( as per drg No. FD-1032. (f) All steel work shal be painted with Powder Coating. Rest as per drawing.

Item No. 25 : Table Serving Drg No. FD-411 : All wood work shall be 1st class hard wood MP teak, as shown, on Drg. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 26 : Chair Dining Drg No. FD-279 : All dinensions and details shall be as shown on Drg. Timber shall be first class hard wood well seasoned free from knots, sapwood, cracks etc. Four Nos triangular brackets in front legs and four Nos at rear legs are to be provided in support of strength to chair dining. Canning shall be as Godrej pattern with cane 2 mm wide for weaving and 3 mm half round for boarder. Holes for weaving plastic cane shall be @ 12.5 C/C. Rest all as per drg.

Item No. 27 : Chair Verandah Drg No. FD-256 (a) The frame shall be made of MS conduit Pipe. (b) Hard rubber/PVC Shoes shoes shall be provided in all four legs. (c) Plastic Canning shall be as Godrej pattern with cane 6/8/10 mm wide for weaving rest as directed by Enrt-in-Charge.

Item No. 28 : Almirah Steel Medium with Shelves Drg No. FD-1032 : Overall size shall be 765mm long, 440mm wide and 1270mm high. The base shall be made of two numbers CRC sheet channel base welded to bottom of almirah and shall be 100 mm high CRC sheet steel shall be 1mm thick for channel base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick CRC sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick CRC Sheet. SS handle shall be 100 mm long. A three way locking device shall be provided to front shutters. Each leaf of front shutters shall be side hung. All joints and welding, fixing shall be done in accordance with standard workmanship. All steel surfaces exposed to view when placed in position shall be given powder coating. Rest all as per Drg or as directed by Engr-in-Charge.

Item No. 29 : Bench Workshop Drg No. FD-145 : All wood work shall be 1st class hard wood MP teak, as shown on drg. All Steel work shall be with good workmanship and finishing. Rest all as per drg and as approved by Engr-in-Charge and GE.

Item No. 30 : Rifle Rack (for Insas Rifle to accomamodate 20 Carbine machines) Drg No. -TP : Item description as per trade pattern. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 31 : Rifle Rack (for Carbine Machine to accomanodate 20 machines) Drg No.-TP : Item description as per trade pattern. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 32 : Bath Mat (PVC) Drg No. FD/E6/MAP/07 : Overall size shall be 400 mm long x 300 mm wide x 250mm high. All PVC work shall be of standard class PVC. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 33 : Chair Writing Drg No. FD-280 : Timber shall be 1st class hard wood seasoned. Screws shall be of 4 mm dia. All faces of wood work shall be wrought, canning shall be with 2mm wide plastic cane half round godrej pattern. The perimeter of canning shall be finished with cane beading 3 mm wide on top. Holes of weaving plastic cane shall be at 12.5 mm center to center. Hard rubber rings/PVC toes shall be provided to bottom of all legs with scerws. Polish : All exposed & hidden surface of wood work shall be French polished. Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 34 : Bed Hard Steel JCOs/Offrs Drg No. FD/E6/MAP/08(R.) (a) Overall size 2050 mm long and 900 mm wide, and 400mm high up to top of the leg. (b) The frame work shall be MS Square/rectangular pipe (18 Gauge) confirming to IS Specification the size as shown on drawing. (c) Top of bed shall be 12mm thick BWR commercial ply (ISI Marked) placed on top. (d) 18mm thick pe-laminated Particle board shall be provided in head board and foot board with 1mm PVC edging rest all as shown on drg. ARC welded to screwed to MS Strip 18mm rectangular pipe. MS square tube (18 Gauge) - 04 Nos all as per drg. (e) The long rails shall be 25mmx65mm rectangular tube (18 Gauge)- 02 Nos (f) Legs shall be 38mm x 38mm MS Square pipe (18 Gauge) shall be provided as shown on drawings. (g) Rubber shoe for legs provided as per shape & size. (h) All Square tube shall be used CRC ISI marked. (j) Rest all as per drawing & directed by Engineer-in-Charge.

Item No. 35 : Charpoy IP Hard Top (a) Overall size 1980mm long and 900 mm wide, and 440mm high upto top of the leg. (b) The frame work shall be MS Square/rectangular pipes (18 Gauge) confirming to IS Specification the size as shown on drawing and as approved by GE. (c) Top of bed shall be 12mm thick BWR commercial ply (ISI marked) placed on top. (d) 25x60mmx6 MS cleat to be welded with fram to support ply. (e) The long rails shall be 25mm x 65mm rectangular tube (18 Gauge) - 02 Nos (f) Legs shall be 32 mm x 32mm MS Square pipe (18 Gauge) shall be provided as shown on drawings. (g) Rubber shoe for legs provided as per shape & size. (h) All Square tube shall be used CRC ISI Marked. (j) Rest all as per Drg and as approved by Engr-in-Charge and GE.

Item No. 36 : Teapoy Verandah (a) 18mm thick pre laminated particle board with PVC edging fixed to MS frame of 18mm square pipe with screws shall be provided. (b) M.S. 18 mm square pipe legs and stiffeners all round shall be provided as shown on drawing. (c) 5mm dia MS bar base tray (12x10 Nos at equal distance) shall be provided. (d) Hard rubber shoe shall be provided in legs. (e) Rest all as per drawings.

Internal Electrification

Item No. 37 : S & F modular type TV Socket out let complete all as specified and as directed.

Item No. 38 : S & F modular type LAN Socket RJ 45 with complete box.

Item No. 39 : S & F modular type Telephone socket RJ 11/12 with complete box.

Item No. 40 : S & F Flame proof mettalic body 1440 RPM heavy duty exhaust fan 300mm sweep with fixing arrangement complete with louver with bolts nuts and washers, bolt ,embedded in the wall including provision of PVC flexible copper cable , two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

Item No. 41 : S&F wall mount fan for kitchen 400mm ,3 blades button conrol ,material aluminium powder coated finish with cord , blade of plasic material including all fixing arrangement complete all as specified.

Item No. 42 : Supply and fix Decorative wall light made up of high grade engineering plastic material suitable for 9/12 W LED lap B22 base Complete all specied and as directed.

Item No. 43 : M&L LED post Top of minimum 26 Watt, min lumen efficacy 100 lumen/watt, light IP 65 protection with fixing arrangement cpmplete all as specified and directed.

Item No. 44 : S&F wall mount Electric Kitchen Chimneys heat auto clean with motion sensor auto off function, touch sensor control LED lighting, metal housing brushless DC motor, LPG Leakage sensor, auto clean alarm, mood light, material tempered glass, noise level not less than 70dB of size 90cm and suction power 1500m3/hr with suitable size of flexible aluminium pipe for chimney exhaust (up to 20 feet 4/6 inch) including all fixing arrangement complete 6 way silent filterless, 12 yr warranty on motor (5 yr comprehensive), Autoclean alarm Mood Lt. Make - Faber/Inalsa/Glean

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1580772.07 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

Jasraj & Company (BID ID -3304048)

r.s.jain & sons (BID ID -3304209)

M/s Arihant Builders (BID ID -3308389)

GEMINI PROMOTERS AND BUILDERS PVT. LTD. (BID ID -3304326)

SATYA PRAKASH BUILDERS LTD (BID ID -3303384)

TRIRAJ VENTURES PRIVATE LIMITED (BID ID -3303866)

M/s Khanna Enterprises (BID ID -3303929)