SPECIAL REPAIR OF EXTERNAL WATER SUPPLY PIPE LINE AT IWT AND SPECIAL REPAIR OF BLDG NO P-6 (JCOs MD ACCN) AT SADILAPUR OF IWT UNDER GE GUWAHATI

Amount

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply & Fixing Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, eave board fixed with self tapping screw complete all as specified and as directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, etc complete all as spfd and directed.

Supply & Fixing for Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling all as specified and as directed.

Material and Labour for 4 mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete all as specified and as directed.

Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and as directed.

Material and Labour for PCC 1:3:6 type C-2 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete (sunken floor filling) complete all as specified and as directed.

Material and Labour applying two coats of water proofing coating by using superlatex the mix ratio shall be 1:4:7 (Super latex :water :cement) or as per manufacturer's instruction suitable for sunken floor and wall complete all as specified and as directed.

Material and Labour PCC 1:2 :4 type B-0 (using 12.5 mm graded aggregate ) as in leveling course in roof padding etc complete all as specified and as directed .

Material and Labour for water proofing treatment on RCC roof comprising with the following:- (a) taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance not exceeding 250m (b) 15m thick plastering in CM 1:4 finished even and smooth and curing for minimum seven days (c) Preparing and cleaning of fully dried cement plastered surfaces (d) Applying one coat of cold bituminous primer to the plastered surfaces @ 0.4 litre per sqm confirming to IS 3384-1986 (e) applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.50 kg per sqm reinforced with polyester non woven febric (weighing not less than 160gms per sqm) shall be applied over bituminous primer. Application of polymeric membrane shall be by touch application. The overlap shall be minimum 100mm on transverse direction and 75mm on longitudinal direction.( f) Applying one coat of aluminium paint over the APP based membrane @ 0.11 kg per sqm complete all as specified and as directed.

Material and Labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,including 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

Material and Labour for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,including 15mm thick screed bed in CM (1:6) in riser of steps,skirting, dado etc complete all as specified and as directed.

Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and as directed..

Material and Labour 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and as directed.

Material and Labour rendering 15mm thick plaster in two layers ( 10mm +5mm ) on brick or concrete surfaces in CM 1:4 mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and as directed. (Note- supply only WPC shall be measured and paid seperately).

Supply only Liquid water proofing compound complete all as specified and as directed.

Material and Labour rendering 10mm thick plaster on other than fair faces of brick or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement complete all as specified and as directed .

Material and Labour rendering 5mm thick plaster on ceiling,soffits of slab etc in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and as directed

Material and Labour for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1.5mm thick wall care putty including primer complete all as specified and as directed.

Material and Labour for preparation of new surfaces of wall and applying two coats of weather exterior acrylic emulsion paint over a coat of 1.5mm thick wall care putty including priming coat of exterior primer complete all as specified and as directed.

Material and Labour for preparing new plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

Supply & Fixing Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling timber scantlings under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed.

Supply & Fixing plain fillets in 2nd class hardwood area exc 13 but n.exc 25 sq cm.square,rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and Labour non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but not exceeding 0.38 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar 1:4, all as specified & as directed.

Material and Labour non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar 1:4, all as specified & as directed.

Material and Labour for glazed ceramic (coloured) tiles of size 450x300x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including10 mm thick backing course in cement mortar 1:4 complete all as specified & as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc. (Dismantling, Laid dry or laid and pointed) complete all as specified and as directed.

Material and LabourGranite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and as directed.

Material and Labour rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar situations all complete all as specified and as directed.

Material and Labour preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified & as directed.

Taking down shutters of any description n. exc. 1 Sqm eachcomplete all as specified and as directed.

Supply & Fixing second class hard wood plain, solid, straight Chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply & FixingBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Material and Labour for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portioncomplete all as specified and as directed.

Supply & Fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified & as directed.

Supply & Fixing35 mm thick 2nd class hard wood Glazed & Skeleton shutters open rebated & prepare to receive glass, gauge etc without sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of member of shutter as specified in SSR Part I ,section 8, clause 8.24(a) fitted to chowkats complete all as specified and as directed.

Supply & Fixingin repair 18 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, etc complete all as specified and as directed.

Supply & FixingContinuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and as directed.

Supply & Fixingstainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.40 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.

Supply & Fixing solid PVC frame size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and as directed.

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

Supply & Fixing 100 mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified and as directed.

Supply & Fixing100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and as directed..

Supply & Fixing 150 mm long aluminum handle febricated type anodised.complete all as specified & as directed.

Supply & Fixing 100 mm long aluminum handle febricated type anodised.complete all as specified & as directed.

Supply & Fixing150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed .

Supply & Fixing 125 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified & as directed.

Supply & Fixing 300mm aluminium anodised sliding door bolt , with hasp and staple,( bolt type ) and fixing clips of sheet steel , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed

Supply & Fixing in repair mild steel 300mm , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & as directed.

Material and LabourPreparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified & as directed.

Supply & Fixing, Aluminium anodised doors/windows/ventilators/partitions etc with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills, etc including aluminium handles, tower bolts, grills, etc complete all as specified and as directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately complete all as specified and as directed .

Supply & Fixing 4 mm thick sheet glass, frosted one side and glazing with oil putty in square not exceeding 0.5 Sq. m in each pane complete all as specified & as directed.

Supply & Fixing for 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

Supply & Fixing for 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

Supply & Fixing in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

Supply & Fixingin repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest, provn and fixing of 10 litres capacity low level PVC flushing cistern, PVC connection pipe 15mm dia 600mm long with two check nut and washer of including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and as directed.

Supply & Fixing in repair brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specifed and as directed.

Supply & Fixing15 mm dia Brass Stop valves/angle cock , screwed down, high pressure, chromium plated, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed .

Supply & Fixingin repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe complete all as specified and as directed.

Supply & Fixing15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed .

Supply & Fixing in repair 15 mm dia Bib cock fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed

Supply & Fixingin repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply & Fixingin repair Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 32mm,as waste pipe etc complete all as specified and as directed .

Supply & Fixing in repair110mm bore PVC ( SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

Supply & Fixing in repair110mm bore PVC ( SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed.

Supply & Fixing110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply & Fixing110mm bore PVC ( SWR) junction, single (Single T) equal or unequal complete all as specified and as directed.

Supply & Fixing110mm bore PVC ( SWR) vent cowl complete all as specified and as directed.

Supply & Fixing in repair 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

Supply & Fixing, in repair, 25mm dia, mild steel, decorative type, PVC coated, curtain rod with brackets complete all as per sample and as specified and as directed.

Supply & Fixing in repair brass chromium plated soap dish of approximate size 160mmx160mmx90mm fixed to pl;ugs with chromium plated brass screws complete all as specified and directed.

Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia D type 60cm long between the flange fixed complete all as specified and as directed.

Supply & FixingRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) of 1000 ltr capacity hoisted and fixed in position all as specified with dismantling of old unserviceable tank complete all as specified and as directed.

Material and Labour 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in sub base, finished even and fair w/o using extra cement complete all as specified and as directed.

Material and Labour prepolished chequered cement concrete, coloured tiles,textured finished of size 250 x 250 x 25/ 300x300x25 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and as directed

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Material and Labour DI pipe of 100 mm bore class K-9 flange pipe suitable for flange joint laid in trenches/ on surface/ over masonry pillar and connection to old or new position complete all as specified and as directed.

Material and Labour DI pipe of 100 mm bore with spigot and socket end class K-7 suitable for tyton joint laid in trenches/ on surface/ over masonry pillar and connection to old or new position complete all as specified and as directed.

Supply & Fixing in repair including taking out existing pipe of 3- layer PP-R (Polypropylene random copolymer) pipes 90 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random sockets and bends as required at site laid in trenches/floor at places where directed complete all as specified and as directed.

Supply & Fixing in repair including taking out existing pipe of 50 mm bore GI Tubing heavy duty in Trenches/ Floor/Pillar and connection in old or news position with existing water pipe line of any size including all fitting which required to connection like socket /Union/Tee/Reducer Nipple etc complete all as specified and as directed.

Supply & Fixing in repair including taking out existing pipe of 40 mm bore GI Tubing heavy duty in Trenches/ Floor/Pillar and connection in old or news position with existing water pipe line of any size including all fitting which required to connection like socket /Union/Tee/Reducer Nipple etc complete all as specified and as directed

Supply & Fixing in repair including taking out existing pipe of 25 mm bore GI Tubing heavy duty in Trenches/ Floor/Pillar and connection in old or news position with existing water pipe line of any size including all fitting which required to connection like socket /Union/Tee/Reducer Nipple etc complete all as specified and as directed.

Supply & Fixing in repair 100 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified and as directed .

Supply & Fixing in repair gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 50 mm bore pipe complete all as specified and as directed .

Supply & Fixing in repair gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 40 mm bore pipe complete all as specified and as directed .

Supply & Fixing in repair gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25 mm bore pipe complete all as specified and as directed.

Material and Labour for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

Material and Labour for constrution of valves pit chamber of size (900 mm x 900 mm x 900 mm, internal ) using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick , 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement motar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement MS frame out of 40 x 40x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer finishing coat including necessary excavation in any type of soil, returing filling in and removal of surplus soil to adistance not exceeding 50 mtrs all as specified and including demolition / dismantling of existing craked valve chamber complete all as specifeid and as directed.

Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as directed.

Material and Labourfor point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLSH type 1100 Volts grade cable ( red colour cable for Phase connection and black colour cable for neutral connection ) including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLSH type 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface complete all as specified and as directed. ( Note : Cutting and chasing deemed to be included in quoted rate also rate for cover plates of appropriate module also deemed to be included in quoted rate )

Light/Fan/Bell point controlled by one no one way switch complete all as specified and as directed.

5 amp socket on same boared complete all as specified and as directed.

5 Amp switch socket on Independent Board complete all as specified and as directed.

Material and Labour for point wiring with 2.5 Sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board multistranded conductor FRLSH type 1100 Volts grade cable ( red colour cable for Phase connection and black colour cable for neutral connection ) including PVC concealed conduit with all accessories including 2.5 sqmm copper multistrand conductor FRLSH type 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface complete all as specified and as directed. ( Note : Cutting and chasing deemed to be included in quoted rate also rate for cover plates of appropriate module also deemed to be included in quoted rate )

Supply & Fixing switch modular type,single pole,one way 10 Amp,240 Volts of make Anchor complete all as specified and as directed.

Supply & Fixing modular socket outlet, 6 Amps multi socket for 2 and 3 pin plug 240 volts complete all as specified and as directed.

Supply & Fixing Switches 16A rated 240volts one way modular complete all as specified and as directed.

Supply & Fixing socket 6A/16A 5 in one modular type 240volts complete all as specified and as directed.

Supply & Fixing ceiling rose, surface, Bakelite, 65x50 mm three terminals complete all as specified and as directed..

Supply & Fixing modular electronic fan step regulator tiny EME 100 W complete all as specified and as directed.

Supply & FixingBell push flush type 5 amp complete all as specified and as directed.

Supply & FixingBuzzer/Ding Dong, A C , 230 volt single pole complete all as specified and as directed.

Supply & Fixinglamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fitting complete all as specified and as directed.

Supply and fixing in replacement of LED batten lights fitting 1x 18W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Material and Labourfor on replacement sub main wiring with 2 run of FRLSH type PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including concealed conduit pvc non metalic type complete all as specified and as directed.

Material and Labourfor on replacement sub main wiring with 2 run of FRLSH type PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including concealed conduit pvc non metalic type complete all as specified and as directed.

Supply & Fixing in replacement of vertical TPN 4 way with provision and including of MCCB of 63 Amp 4 Pole and provided with CRCA sheet steel powder coated,double door ready to use DBs provided with insulated vertical phase bus bar, neutral bar, earth bar, sticking saddle, colour coded interconnecting wire set, cabel ties, blanking plates etc complete all as specified and as directed.

Supply & Fixingin repair MCB single pole 10 to 32 amps 240 volts 10 KA , C series complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including taking down old and depositing to MES store yard complete all as specified and as directed.

Supply & fixing in repair of building secuirity light 35 watt, new generation energy saving & environmental friendly long life versatile presuure die-cast aluminium IP 66 roadway luminaire with high power LED source with acrylic cover complete all as specified and as directed.

Supply & Fixing street light bracket made out of GI pipe light grade 40 mm dia minimum1.5 mtr long bent to required shape as directed and fixed to pole complete with two coats of aluminium paint over a coat of red oxide primer incl clamps and nut, bolts and washers complete all as specified and as directed .

Material and Labour for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 25mm x 4 mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 25mm x 4mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and as directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

Material and Labour in trenches bricks common burnt un clay, building brick, sub class B designation 75 for cable protection complete all as specified and as directed.

Material and Labour for supply and fixing / Laying , connect, test and commissioning of LT under ground cable of size 25 Sqmm 3.5 Core, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Material and Labour 40 mm bore GI Tubing heavy duty in Trenches/ Floor/Pillar and connection in old or news position with existing water pipe line of any size including all fitting which required to connection like socket /Union/Tee/Reducer Nipple etc complete required complete all as specified and as directed.

Material and Labour 25 mm bore GI Tubing heavy duty in Trenches/ Floor/Pillar and connection in old or news position with existing water pipe line of any size including all fitting which required to connection like socket /Union/Tee/Reducer Nipple etc complete all as specified and as directed.

M/s Dhani Enterprise

Goswami Traders