Construction work of Interlocking tiles drain and support wall In Ward-56 Avantika Extension G.D.-38 street from Ganpati Farm House via Anamika Gautam house to Ram Kumar Shisondia house.

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and and earth work in cartage upto 14 km.including remming and dressing the surface to required levels and slops and also including 1.50 M lift and 30 M Lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M. as directed by Engineer in charge excluding royality as per UP.P.W.D.SOR-2022 S.I.No-253(a).

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per MORD Analysis, Clause No.401.

M-150 Brick work with 1:4 cement &coarse sand mortor in foundation and plingth including supply of all material, labour t&p etc . required for proper completion of work , as per MORD Analysis, Clause No.600,1202,1203.

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per MORD Analysis, Clause No. 613.4 & 1204.

Providing and laying of cement concrete with 20 mm gauge stone ballast, coarse sand & cement in the proportion of 1:2:4 including supply of all materials, labour. Tools& plants etc. required for proper completion of work. as per MORD Analysis, Clause No.800 II.

Supply and laying of Precast cement concrete 80 mm thick Rubbar Moulded Grey colour I-shaped interlocking Paver blocks ISI Marks confirming to S 15658-2000 with top layer of minimum 8 mm thickness having Plan dimensions 200 (160+120) mm of O.P.Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro compression mechanism. The compressive strenght of Paver shall not be less than 30Mpa(M-30) and weight 5 Kg per No. and including cost of materials with a blanket layer of 4 cm thik fine sand layer materials,labour and T&P etc required for proper completion of work as directed by the Engineer -in-charge. Rate approved by S.E.R.E.D.Meerut.

Supply and laying of Precast cement concrete 80 mm thick Rubbar Moulded Red/Yellow colour I-shaped interlocking Paver blocks ISI Marks confirming to S 15658-2000 with top layer of minimum 8 mm thickness having Plan dimensions 200 (160+120) mm of O.P.Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro compression mechanism. The compressive strenght of Paver shall not be less than 30Mpa(M-30) and weight 5 Kg per No. and including cost of materials with a blanket layer of 4 cm thik fine sand layer materials,labour and T&P etc required for proper completion of work as directed by the Engineer -in-charge. Rate approved by S.E.R.E.D.Meerut.

Providing and laying in position machine battched and machine mixed design mix M- 25 grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge .cement content considered in the item is 330Kg/cum as per MORD Analysis, clause 800,1205.4 & 1205.50.

Providing and laying in position machine battched and machine mixed design mix M- 25 grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge .cement content considered in the item is 330Kg/cum as per MORD Analysis, clause 800,1205.4 & 1205.50.

Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut.