WELCOME MAINTENANCE AND CERTAIN MISC BR AND EM REPAIR TO MD ACCN AND REPAIR REPLACEMENT OF INTERNAL WIRING, DBs, MCBs, LIGHT FITTINGS AT DEFENCE COLONY AND OT ROAD COLONY AT BALASORE

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R WORK)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement including taking down old cement plaster all as specified.

M&L for 5 mm thick cement plaster in cement mortar 1:3 of ceiling, finished even and smooth with out using extra cement including taking down old cement plaster complete all as directed.

M&L three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

M&L Preparation of old plaster surfaces and one coat of white wash on wall complete all as specified and as directed.

M&L three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L Preparation of old plaster surfaces and one coat of white wash on ceiling complete all as specified and as directed.

M&L Preparation of new plaster surfaces on wall and applying two coats of oil emulsion distemper over one coat of alkali resistant priming paint on wall complete all as specified.

M&L Preparation of new plaster surfaces of walls and applying two coat of oil emulsion distemper over a coat of alkali resistant primer including a coat of 3 mm thick wall care putty complete all as specified and directed

M&L Preparation of old plaster and two coat oil bound distemper applying of decorated plastered surfaces on wall complete all as specified and as directed.

M&L for preparation of old plastered surfaces and applying one coat of oil bound distemper over old plastered surfaces of wall surfaces complete all as specified and as directed.

M&L complete removal of existing treatment of walls and applying two coat of oil emulsion distemper over a coat of alkali resistant primer including a coat of 3mm thick wall care putty complete all as specified and directed.

Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.

M&L preparation of old surfaces and applying one coat of synthetic enamel paint to wooden surfaces over 10 cm width or girth complete all as specified and as directed.

M&L preparation of old surfaces and applying one coat of synthetic enamel paint to steel surfaces over 10 cm width or girth complete all as specified and as directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15 mm bore.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20 mm bore.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

Taking down PVC(SWR) pipes including all fittings.

Taking down shutter of any description exc 1.00 sqm but n exc 2sqm complete all as specified and directed.

Taking down shutter of any description n exc 1.00 sqm complete all as specified and directed.

Taking down chowkath or frame exc 1.5 sqm n exc 4 sqm with shutter (without taking of shutters from frames) complete all as specified and directed.

Taking down chowkath or frame n exc 1.5 sqm with shutter (without taking of shutters from frames) complete all as specified and directed.

Resecuring or easening, adjusting without taking down of shutters exc 1 Sqm and n.exc 2 Sqm each in situ.

M&L Plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete.

M&L Plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregates) in bed blocks for fixing hold fasts etc including necessary form work.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rabated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S/F 35mm thick 2nd class HW glazed and Skelton shutter open rebated and prepared and to receive gauze etc without sash bar.

S/F 35 mm thick factory made (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces klin seasoned and chemically pressure treated.

S&F 35mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 30mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a).

S/F factory made solid panel PVC door shutter prelaminated one side 30 mm thick(style) conisiting of frame made out of M S tubes for top and bottomrails. MS frame shall be covered with heat moulded plain colour PVC ;C; channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail. Pannelling of plain colour PVC sheet to be fitted ithe MS frame welded/sealed to the stile and rail with suitable PVC sheet bedding and jointed with solvent cement as per specification.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.

S&F in repair 12 mm thick prelaminated particle board , interior garde , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work.Make-Kitply/Greenply/National

S&F in repair 18/19 mm thick prelaminated particle board, interior garde, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work.Make-Kitply/Greenply/National

S&F 75 mm long aluminium, anodised barrel tower bolts of extruded section.

S&F 150 mm long aluminium, anodised barrel tower bolts of extruded section.

S&F aluminium sliding door bolt 300 mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

S&F 100 mm size steel butt hinges medium weight , cold rolled.

S&F 75 mm size steel butt hinges medium weight , cold rolled.

S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodisedcast type, anodised.

S&F 75 mm Extruded aluminium alloy handles, fabricated type, anodisedcast type, anodised.

S/F in repair 100 mm hasp and staple brass with mild steel hinge pin including bolt to hinge plate fixed with screw

S/F in repair extruded brass handles, fabricated type polished brass handles,150mm long.

S&F in repair brass barrel tower bolts, extruded section 100 mm long.

S&F in repair mild steel piano hinges, width of flaps 30 mm.

S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor.

S&F in repair 150 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor.

S&F galvanised stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire stapple in repairs.

S&F galvanised stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire stapple

Hacking out old broken glass panes (any thickness size quality or description) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed

S/F sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane 4 mm thick.

Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane putty in squares not exceeding 0.50sqm in each pane complete all as directed.

S&F in repairs for CP curtain rod 20 mm dia with socket complete all as specified.

Supply & fix framed work such as grills, gratings, etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 390 Gde E-165 complete all as directed by the Engr-in-Charge.

M&L MS flat iron for hold fast and similar item conforming to Fe-290-0 .

M & L granite slab (of any type) 20 mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete.

M&L PCC 25 mm thick PCC 1:2:4 type B-0 ( Using 12.5 mm graded aggregates), for laying floor finishes such as tiles etc.

M&L Rendering 10 mm thick cement plaster in CM 1:4 on fair faces of brick work (internal surfaces) for fixing of wall tiling.

M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for non skid ceramic and grinaite tiles .

M&L Glazed ceramic coloured tiles 450 mm x 350 mm x 7 mm thick coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm (300 x 300 mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm ( 400 x 400 mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement.

M&L for vertified ceramic tiles 10mm thick light shade (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L two coat syenthetic enamel paint over a coat of red oxide primer on new steel surface with complete preparation of surface.

Supplying and laying of 16 mm dai CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of 20 mm dai CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Brass Elbow 16/20mm dia

L Brass Elbow (3/4 X ½

M Brass Tee 16mm

M Brass Tee 20mm

Male Brass Threaded Adaptor (MTA/ MBTA) ) for 16mm

Fe male Brass Threaded Adaptor (MTA/ MBTA) ) for 16mm

Union 16mm

Union 20mm

Refixing of GI pipe with new fittings-15mm dia.

Refixing of GI pipe with new fittings-20mm dia.

S/F HDPE pipe of pressure 6 Kgf / sqcm fixed complete to walls/floor 50 mm dia

S&F in repairs 500 litre capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR Part-I.

Disconnecting existing tanks of capacity Exc 250L and n. exc 500L , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

S&F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed in repairs.

S&F in repairs 15 mm dia fancy type CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repairs 15 mm dia CP concealed type stop valves/ angular stop valves , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions in repairs.

S/F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair.

S&F PVC grating doom 100 mm dia .

S/F PVC connection pipe 15mm size with PTMT nuts 450mm long

S&F PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints of dia 110mm fixed in repair.

S/F PVC (SWR & RWP) bends any radius of bore 110 mm incl. With access door fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S/F PVC (SWR & RWP) junction single (single 'Y') equal or un equal of bore 110 mm incl. With access door fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S&F PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints of dia 75 mm fixed in repair (SUPRME/PRINCE/ ORIPLAST)

S/F PVC (SWR & RWP) bends any radius of bore 75 mm incl. With access door fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S/F PVC (SWR & RWP) junction single (single 'Y') equal or un equal of bore 75 mm fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S/F PVC (SWR & RWP) floor trap plain with grating inclu. Jointing with solvent cement of out let dia 75mm fixed in repair.

M&L for vitreous china squatting pan of Orissa pattern size 580 X 440 mm white with intregal foot rest (excluding flushing cystern and flush pipe) in repairs .

M&L PVC valve less syphonic action type flushing cistern 10 ltr capacity low levelhigh level white with inlet ball valve , float flush pipe and handle including bracket fixed in repair.

S&F vitreous china wash hand basin white, flat back, size 550x400 mm with brackets including cutting for and pinning in end of brackets in repairs .

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S/F brass chromium plated shower rose 125 mm size fixed in repair.

S&F Brass CP tubular towel rail, 20mm dia, "D" type, 60 cm long between flanges fixed in repair.(Make-Prayag/Jaquar)

S&F stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm fixed in repair Make-Nirali/Blue star

S&F CP soap case in repair

S & F in repair Bib tap of PTMT any colour 15 mm dia (Prayag as or equivalent) all as specified.

S & F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15 mm bore (Prayag as or equivalent) all as specified.

M&L vitreous china wash down water closet pan (pedestal pattern) white fixed in repairs

S & F plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging devised fixed ir repair

M & L health faucet Abs with Double lock 1.2 meter stainless steel flexible hose andwall hook.

SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION WORK)

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 1.5 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 1.0 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 1.5 Sqmm and one run of 1.0 Sqmm cable shall measured as one length.

All as per Sl Item No 2.002 here-in-before but through casing caping.

Supply and fix in repair circuit/sub-main wiring (surface type) with PVC insulated & unsheathed two run of 2.5 sq mm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 1.0 sq mm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.e. Note : (i) Two runs of 2.5 Sqmm and one run of 1.0 Sqmm cable shall be considered as single length.

All as per Sl Item No 2.004 here-in-before but through casing caping.

Supply and fix in repair circuit/sub-main wiring (surface type) with PVC insulated & unsheathed two run of 4 sq mm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 2.5 sq mm PVC insulated copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 25 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.Note : (i) Two runs of 4 sqmm and one run of 2.5 sqmm cable shall be considered as one length.

All as per Sl Item No 2.006 here-in-before but through casing caping.

Supply and fix in repair circuit/sub-main wiring (surface type) with PVC insulated & unsheathed two run of 6 sq mm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 sq mm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade,connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 25 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge. Note : (i) Two runs of 6 sqmm and one run of 4 sqmm cable shall be considered as one length.

All as per Sl Item No 2.008 here-in-before but through casing caping.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one bell point controlled by one 5/6 amps, one way bell push including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light point controlled by one 5/6 amps, two two way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 6/16 amps socket outlet on independent board controlled with one, 16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one bell point controlled by one 5/6 amps, one way bell push including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L switch piano, flush type single pole, one way 5 Amps including connection.

M&L switch piano, flush type single pole, two way 5 Amps including connection.

Supply and fixing of call bell Dingdong, 230 V AC, single pole

Supply and fixing bell push, flush type , 5 Amp

M&L switch socket combination 2 in 1, 5 Amps flush type including connection

M&L switch socket outlet multipurpose 3 Pin, 15 Amps and one 5 amps controlled by one switch.

M&L ceiling rose PVC poly carbonate, isolated body with three terminals including connection.

Supply and fixing stepped type electronic fan requlator flush type 230/240 volts complete all as specified

M&L lamp holder angular type PVC / Polycarbonate type insulated body with back plate suitable for batten fittings.

Supply and fixing in repair of MCB DB single door made of sheet steel phosphasted, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall including making good disturbed surfaces. Make : Havells or equivalent type of standard, Legrand

Supply and fixing in repair of MCB DB single door made of sheet steel phosphasted, powder painted with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts double door fixed in wall including making good disturbed surfaces. Make : Havells or equivalent type of standard, Legrand

Supply and fixing in repair of MCB DB double door made of sheet steel phosphasted, powder painted with bus bar, neutral link, earth bar and din rail of SPN 4 way, 415 Volts double door fixed in wall including making good disturbed surfaces. Make : Havells or equivalent type of standard, Legrand

Supply and fixing Isolator TPN, 415 Volt 100 A, Make : Havells/C&S/Legrand

Supply and fix in repair MCB SPN 40 amps, 240 Volts, Make : Havells/C&S/Legrand

Supply and fix in repair MCB SPN 63 amps, 240 Volts, Make : Havells/C&S/Legrand

S & F in repair MCB SPN 6-32 Amps Rating 240 volt, Make : Havells/C&S/Legrand

Supply and fix in repair MCB SP 6-32 Amps Rating 240 volt, Make : Havells/C&S/Legrand.

S&F LED type Bulk Head fitting e TARTA 6W engineering plastic housing with prismatic diffuser all as directed, Cat Part No : C&S cat no:CG801B10WLED, Make : Philips/CG

S&F LED type intigrated batten fitting T5 Nakshatra Series indoor decorative aluminium extructed fitting 20W 4FT white all as directed. Make: C&S Cat Part No : LTIB4F20WLED/W Make : Philips/CG

S&F LED type intigrated batten fitting T5 Nakshatra Series indoor decorative aluminium extructed fitting 10W 4FT white all as directed. Make :C&S CAT NO: LTTB2F10WLED/W or Philips/CG

S&F LED T8 tubular lamp with pc body and diffuser and inbuilt driver ,white 20 watt complete all as specified and as directed. Make: CG Cat Part No : LT-20-865-2 or equvelent make of Philips/C&s

S&F in repair highly robust industrial box type luminaire suitable for single LED T8 tubular lamp with pc body 16 Watt complete all as specified and as directed. Make: CG Cat Part No : IGP161LT8-16

S&F in repair AC single phase electronic kwh energy meter of sheet steel body/polycarbonate body ,counter type display with transparent hinge type box,rating 5-30A, 240V make:HPL code no- SPPC1310000002OC00

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity complete all as specified and as directed by the Engr-in-Charge.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 50 Ltr capacity complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in replacement for heating elements of 1.5 /2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in replacement for thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in replacement for 450 mm long brass CP braided hoses with 2 nuts without nipple suitable for geysers complete all as specified and as directed by the Engr-in-Charge. Make : Jaquar Cat No 805B or equivalent approved make.

Supply and fixing as in replacement for PVC inlet connector pipe 450 mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser complete all as specified and as directed by the Engr-in-Charge. Make : Prayag/Polyfuf.

Supply and fixing as in replacement for apparatus plate , including suitable for water storage heater of 25 ltrs capacity complete all as specified and as directed.

Supply and fixing as in replacement for apparatus plate , including suitable for water storage heater of 50 ltrs capacity complete all as specified and as directed.

Material and labour preparation to old painted surface of storage water heater of 25 ltr capacity and painting with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed by the Engr-in-Charge.

Material and labour preparation to old painted surface of storage water heater of 50 ltr capacity and painting with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in replacement for copper container suitable for Geyser 25 ltr complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in replacement for copper container suitable for Geyser 25 ltr complete all as specified and as directed by the Engr-in-Charge.

Taking down ceiling fan of any type, any make and any sweep for repairing, opening the body and blade, checking for repalcement of unserviceable minor spares like nut,bolt,bush,clamp & down rod as required and cleaning, overoiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed by the Engr-in-Charge. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only Ball bearing of size 6201/6202/6203 for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed by the Engr-in-Charge. Make : TATA/SKF

Supply only as in replacement 2.5 mfd capacitor complete all as specified and as directed by the Engr-in-Charge.

Supply only as in replacement 3.5 mfd capacitor complete all as specified and as directed by the Engr-in-Charge.

Material and labour for painting of ceiling fan of size 1200 mm & 1400mm sweep with down rod upto 2.00 mtr long with two coats of synthetic enamel spray white paint including preparation old painted surface including writing of MES No with letters n exc 15cm height complete all as specified and as directed by the Engr-in-Charge.

Rewinding of ceiling fan, 1200 mm and 1400mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed by the Engr-in-Charge.

Taking down exhaust fan of any type, any make and any sweep for repairing, opening the body and blade, checking for repalcement of unserviceable minor spares like nut,bolt,bush,clamp & down rod as required and cleaning, overoiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed by the Engr-in-Charge. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only Ball bearing 2001/ 2002/ 2003 for exhaust fans complete all as specified and as directed by the Engr-in-Charge. Make : TATA/SKF

Rewinding of ceiling fan, exhaust fan of 230mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed by the Engr-in-Charge.

Rewinding of ceiling fan, exhaust fan of sweep exc 230 mm but n exc 450 mm with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed.

Supply and fixing as in replacement M.S. galvanised louvers suitable for exhust fan of size 300/230mm sweep complete all as specified and as directed.

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.

Material and labour in replacement for Galvanised iron strip 32 x 6 mm burried in ground complete all as specified and directed.

Supply and fix in replacement rectangular PVC box of size 17.5 x 10 x 4 cm depth closed recessed complete all as specified and as directed.

Supply and fix in replacement rectangular PVC box of size 10 x 10 x 4 cm depth closed recessed complete all as specified and as directed.

Supply and fix in repair MS box of size 25 cm x 20 cm x 6 cm made of 1.6mm thick MS sheet painted with smoke grey paint on all sides with 3mm thick plastic laminated sheet cover including brass screws, washers etc, after dismantling old one including making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair MS box of size 15 cm x 10 cm x 6 cm made of 1.6mm thick MS sheet painted with smoke grey paint on all sides with 3mm thick plastic laminated sheet cover including brass screws, washers etc, after dismantling old one including making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair MS box of size 10 cm x 10 cm x 4 cm made of 1.6mm thick MS sheet painted with smoke grey paint on all sides with 3mm thick plastic laminated sheet cover including brass screws, washers etc, after dismantling old one including making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair 3mm thick industrial plastic laminated sheet of size 11" x 9", duly cut for fixing switch piano type, switch socket combination etc. complete all as specified and directed. Make : Super hylem or equivalent approved make.

Supply and fix in repair 3mm thick industrial plastic laminated sheet of size 10" x 8", duly cut for fixing switch piano type, switch socket combination etc. complete all as specified and directed. Make : Super hylem or equivalent approved make.

Supply and fix in repair 3mm thick industrial plastic laminated sheet of size 7" x 5", duly cut for fixing switch piano type, switch socket combination etc. complete all as specified and directed. Make : Super hylem or equivalent approved make.

Supply and fix in repair 3mm thick industrial plastic laminated sheet of size 4" x 4", duly cut for fixing switch piano type, switch socket combination etc. complete all as specified and directed. Make : Super hylem or equivalent approved make.

DS ENTERPRISES

RANA ENTERPRISES

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

MS SUBHAM ENGINEERING AND CO