Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 CrAdmitted-Finance | ₹7.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹7.8 CrAdmitted-Finance | ₹7.8 Cr | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Shri TAMDORSING NADON L1 | M/S MAACHKON L2 |
|---|---|---|---|---|---|
| 1.10Abstract of Cost | |||||
| 1.20 | Civil Works | 1 | Nos | 3,89,16,045 ₹3.9 Cr | 4,23,23,900.09 ₹4.2 Cr |
| 1.30 | Plumbing Works | 1 | Nos | 1,26,68,678 ₹1.3 Cr | 1,37,77,659.77 ₹1.4 Cr |
| 1.40 | Electrical Works | 1 | Nos | 1,28,94,791 ₹1.3 Cr | 1,40,23,089.62 ₹1.4 Cr |
| 1.50 | EMP | 1 | Nos | 71,52,015 ₹71.5 L | 77,30,191 ₹77.3 L |
Tender Value
₹7.8 Cr
EMD Value
₹23.4 L
Closing Date
27 Nov 2025, 1:30 pmClosed
Director of Toursm
Directorate of Tourism, 3rd Secretariat Lachumiere Shillong
Village Holistic Tourism Infrastructure Development at Nongwar Meghalaya
2025_MANDB_1833_1
M/D Tour/Tech/99/2024/6
Open Tender
Construction Works
540 days
Nongwar
Please refer Tender documents.
5 documents required · 5 mandatory
₹7,000
Director of Tourism
₹23.4 L
Directorate of Tourism, 3rd Secretariat Lachumiere
22 Jan 2026
21 Oct 2025
28 Nov 2025
21 Oct 2025
27 Nov 2025
21 Oct 2025
4 Nov 2025
Abstract of Cost
Civil Works
Plumbing Works
Electrical Works
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
In ordinary rock (Soft rock / medium rock / hard shale)
Disposal of unserviceable material from the work site including loading and unloading complete as
First 5 Km
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6 coarse sand :12graded stone aggregate 20mm nominal size)upto plinth level with .
Cement mortar 1:6 (1cement : 6 coarse sand)
Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.
Stone soling
Plain cement concrete works in foundation bed for footing steps, walls, brick works etc. below plinth level as directed and specified including dewatering if necessary and curing complete(shuttering where necessary shall be measured and paid separately)
In prop. 1:3:6 (1 cement: 3 coarse sand: 6 coarse agg. By volume using mixture machine)
SHUTTERING/FORMWORK
Centering and shuttering including strutting, propping etc and removal of form for all heights complete and as directed by Engineer in charge concrete works (using steel)
Slabs, roofs, landings, balconies and access platform, shelves (using steel)
Total
Lintels, beams, plinth beams, girders, bressumers and cantilever(using steel)
Columns, pillars, piers, Abutments, posts & strut (using steel)
Supplying, fitting and fixing in position reinforcement bars upto first floor level, conforming to relevant I.S. code for RCC work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and bending with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required)
High Yield Strength Deformed Bars or Tor Bars
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuterring,finishing and reinforcement.All work upto plinth level
M20 or 1:1 1/2:3 (1cement :1 1/2 coarse sand:3graded stone aggregate 20mm nominal size
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets,columns, pillars,posts and struts etc,above plinth level upto first floor level,exlluding cost of centering, shuttering, finishing and reinforcement:
M20 or 1:1/2:3 (1cement :1 1/2 coarse sand: 3graded stone aggregate 20mm nominal size)
Reinforced cement concrete works in beams,slabs,roofs having slope up to 15°,landings, balconies, shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases above plinth level upto first floor level,excluding the cost of centering,shuttering,finishning and reinforcement.
M20 or 1:1/2:3 (1cement :1 1/2 coarse sand: 3graded stone aggregate 20mm nominal size)
Brick work in cement mortar with1st class brick including rackingout joints and curing completely in super structure above plinthlevel upto first
Brick work in cement mortar with1st class brick including racking out joints and curing completely in super structure above plinthlevel upto first floor level including dewatering if necessary as directed.
(d) In proportion 1:6 (1 cement:6 Sand)
Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in
Brick work in cement mortar with 1st class brick including racking out joints and curing completely in super structure above plinth level upto first
Providing and fixing UPVC work for windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gasp at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. UPVC sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, UPVC snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge (glazing and panelling tobe paid separately):
For fixed portion
Polyester powder coated UPVC (minimum thickness of polyester powder coating 50 micron)
Providing and fixing glazing in UPVC window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
With float glass panes of 8.0 mm thickness (weight not less than 15kg/sqm
Providing and fixing bright finished brass handles with screws etc. complete:
Providing and fixing ISl marked flush door shutters conforming to ls:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces Of shutters:
35 mm thick including lsl marked stainless steel butt hinges with necessary screws
Providing and fixing bright finished brass tower bolts (barerel type) with necessary screws etc. complete.
CODE NO : 11.16
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applying priming coat of approved steel primer - M.S.tube
Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 a/a and conforming to ls:15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed Of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc.complete.
CODE NO : 22.6
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : -a) after surface preparation, first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm - b) laying second layer of fiber glass cloth when the first layer is still green. Overlaps of joints of fiber cloth should not be less than 10 cm . - c) third layer
CODE NO : 13.17
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement:4coarse sand) mixed with 2°/a integral water prcofing compound, laid over a bed of 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) and finished neat complete.
CODE NO : 12.20L
Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete
15 mm thick cement plaster on the rough side of single or half brick wall of mix:
In cement mortar 1:4
15 mm thick cement plaster on the rough side of single or half brick wall of mix:
In cement mortar 1:4
CODE NO : 15.31
6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self-curing mortar Of approved make as per the direction Of Engineer-ln-Charge.
Finishing walls with Acrylic smooth exterior paint of required shade, including scaffolding
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat Of exterior primer applied @ 2,20 kg/10 sqm)
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
New work (two or more coats)
Varnishing with varnish of approved brand and manufacture:
Two or more coats Of glue sizing with copal varnish over an under coat of flatting varnish
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: After surface preparation 1st layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253 kg/sqm.
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti termite treatment (excluding the cost of chemical emulsion) & rodding etc.complete
itemH1Code72
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti termite treatment (excluding the cost of chemical emulsion) & rodding etc.complete
Providing and laying Eluca Swimming pool tiles up to 250 x125mm sizes (thickness to be specified by the manufacturer) or Approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including mixing of adhesive, grouting the joints with white cement and matching pigments etc.
Supplying and filling 'M' sand in layers of not more than 4" thick well-rammed, watered and consolidated in foundation and basement etc complete.
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
Providing and laying Eluca Swimming pool tiles up to 250 x125mm sizes (thickness to be specified by the manufacturer) or Approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including mixing of adhesive, grouting the joints with white cement and matching pigments etc.
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
Providing fitting and fixing vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with Outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wheever required:
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
Providing and fixing toilet paper holder:
Providing fitting & fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making the walls wherever reqiured:
Providing and fixing P.V.C waste pipe for sink or wash basin including waste P.V.C waste fittings complete.
Providing and fixing PTMT grating of approved quality and colour.
Rectangular type with openable circular lid
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:
Supply, installation of filtration system, pump & motor, heating with thermostat & control panel, pool side wall fittings, under water lights, pool sanitation and pipe interconnection between pool and filtration plant/pump. The rate inclusive of SS ladder swimming pool and Four under water lights.
Supplying, fixing and testing of lever operated Ball valves with fittings of screwed end type. The cost shall include cost of materials, labour including lead and lift charges, all complete as per specifications
Supplying, fixing, testing and commissioning of Slim seal standard lever operated type Butterfly valve PN 1.6 with Bronze / Gunmetal seat duly ISI marked complete with SS nuts, SS bolts, SS washers, gaskets and flanges conforming to IS 13095, of following sizes all complete as required. The cost shall include cost of materials, labour including lead and lift charges, all complete as per specifications.
Supply, fixing, testing and commsisioning uPVC Pressure pipe (Ring-fit) soil waste vent pipe of Class 3 (6 Kgf/cm2) conforming to IS 4985-2000 including all fittings (IS 7834 for moulded fittings and IS 10124 for fabricated fittings), Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with
40 mm dia
75mm dia
PVC solvent, running of pipes suspended from the ceiling with brackets and fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS angle supports, Pipe supports (all MS angle supports / frames to be painted with two coats of primer) and fasterners. The cost shall include transportation, lead and lift all complete as required
Supply and fixing SWR Nahani trap self cleansing design with SS 304 grade approved cover plate (Jali).The cost shall include cutting and making good the floor wherever required, including cost of materials, labour including lead and lift, all complete as per specifications. (110mm dia inlet and 75mm outlet )
450 X 450mm size ' P' trap
Inside size of 600mm x 600mm and depth not exceeding 1000mm
Supply, fixing, testing and commsisioning uPVC SWR (Type B, Ring fit) soil waste vent pipe conforming to IS 13592-1992 including all fittings (IS 14735-1999), Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solvent, running of pipes suspended from the ceiling with brackets and fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS angle supports, Pipe supports (all MS angle supports / frames to be painted with two coats of primer) and fasterners. The cost shall include transportation, lead and lift all complete as required
PVC solvent, running of pipes suspended from the ceiling with brackets and fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS angle supports, Pipe supports (all MS angle supports / frames to be painted with two coats of primer) and fasterners. The cost shall include transportation, lead and lift all complete as required
110 mm dia
160 mm dia
Providing and fixing Constructing storm water catch basin internal clear dimension as mentioned below with 230 mm thick brick masonry wall using 1st class table moulded brick in 1:4 over a bed of 150 mm thick 1:4:8 PCC in cement motar 1:5 (1cement: 5 fine sand),sand), precast perforated RCC top slab in 1:2:4 Mix (1 cement: 2 coarse sand: 8 graded stone aggregate),with angle iron frame, inside plastring 15 mm thick with CM 1:3
Supply, fixing, testing and commsisioning uPVC Pressure pipe (Ring-fit) soil, waste vent pipe of Class 3 (6 Kgf/cm2) conforming to IS 4985-2000 including all fittings (IS 7834 for moulded fittings and IS 10124 for fabricated fittings), Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solvent, running of pipes in the shafts / ceiling with brackets and fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS angle supports, Pipe supports (all MS angle supports / frames to be painted with two coats of primer) and fasterners. The cost shall include transportation, lead and lift all complete as required
(1cement: 3 fine sand) finished very smooth with floating coat of neat cement & making channel in cement concrete 1:2:4 (1cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing.
External
Supplying and fixing of Leaf trap with kurra made out of PVC with flange and grating for rain water outlets on terrace etc., complete.
15 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Enginner-in- Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing CP brass long body bib cock of approved quality
25mm nominal outer diameter pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, haivng thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Enginner-in- Charge.
External work
32mm nominal outer diameter pipes
65mm nominal outer diameter pipes
Providing and placing on terrace (at all floor levels polyethylene water storage tank, IS:12701with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Supply, installation, testing and commissioning of Heat pump system capacity of 250 LPH hot water generation, along with 1500 liter storage capacity MS tank with suitable thermal insulation as required, with 1 Copeland compressor & 1 fan, vertical discharge, Which can be controlled by auto temperature & time controller etc. The item including of suitable capacity of circulation/feed pump & recirculation pump with all complete as required.
Supplying fitting & fixing complete Domestic mini single phase 1(PH) Monoblock water pump set.
(The rate shall include necessary earth work excavation in all types of soil (excluding soft and hard rock), with back filling including consolidation disposing the excess earth to all leads curing, finishing etc., and back filling and completion)
Fixing, testing and commissioning of 15mm dia C.P brass angle stop cock with wall flange and 15mm dia PVC connecting pipe, The cost shall include cutting and making good the wall wherever required, including cost of labour including lead and lift charges, all complete as per specifications.
Design, supply, installation, testing and Commissioning of 15KLD Sewage Treatment Plant based on SBR technology including all necessary mechanical equipments, instrumentation items, interconnection pipes and all allied works with all complete as required by the state pollution control board (PCB's) standards for treated water safe disposal.
Supply, fixing, testing and commsisioning of uPVC SWR (Type B, Ring fit) soil waste vent pipe conforming to IS 13592-1992 including all fittings (IS 14735-1999), Eg: Bends, tees, elbows collars, juction, inspection doors, cowls, offset acess pipes, jointing with PVC solvent, running of pipes suspended from the ceiling with MS brackets and SS fasteners, chasing / chipping walls using groove cutting machine, making bores / core cutting in slab / beam / wall and making good of the same, cost shall include providing steel brackets, MS supports, Pipe supports and SS fasterners. The cost shall include transportation, lead and lift all complete as required
Supply, installation, testing and commissioning of booster pump along with the pressure vessal, control panel, transducer etc complete of the following duty condition. The item including cost of necessary fittings, starters, control panel and accessories with all complete as required. Duty Condition: 1 Cum/hr at 30 m head . Note: One set consists of 1 working and 1 standby pump (Booster water sump)
40 mm dia
INTER CONNECTION OF PIPINGS:
Supply, Erection and testing of piping works including Suction and delivery of all pumps, blowers, Filters complete alingment with following specification
Pipes & Fitting : UPVC/CPVC/MS/GI
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
WIRING
Supply and fixing of double seal, pre-cast RCC, Medium duty inspection chamber cover with frames of the following sizes. Construction of pre-cast RCC cover to be made to withstand atleast 25 metric tonnes of loading of following size
NOTE: (1) Strictly use SDR-11 grade CPVC pipe and fittings for internal domestic cold water supply up to 54 mm dia. (2) Rate Quoted shall be inclusive of cost of other consumables like hacksaw blade, solvent for CPVC pipe up to 54 mm dia etc. 3) Above 54mm dia. shall be CPVC schedule 80
Concealed Wiring in looping in system with 2x1.5 sqmm PVC insulated single of 600V grade in heavy gauge PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.
Long Point upto 10mts
With copper conductor
Concealed Wiring in looping in system with 2x1.5 sqmm PVC insulated single of 600V grade in heavy gauge PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.
Wiring as in item No.20 above to Light Plug Point when fixed elsewhere with continous earth wire complete.
With copper conductor
Long Point upto 10mtes
With copper conductor
wiring as including in item supplying No.20 and above fitting to of Power 15Amp Plug Point modular with 2x4mm2 socket Combined with continuous earth wire to a Power Plug Point Complete.
With copper conductor
Concealed Wiring in looping in system with 2x1.5 sqmm PVC insulated single of 600V grade in heavy gauge PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.
Wiring as in item No.20 above to Ceiling Fan/Exhaust Fan Point
With copper conductor
Wiring as in item No.20 above to Wall Point
With copper conductor
Wiring as in item No.20 above to Calling Bell/Bell Indicator Point
Wiring as in item No.20 above for Stair case/2Way Switch Wiring
Drawing Main and Sub-main Line wiring as in item No.20 above with VIR or PVC Single Core 250V Grade Cable
With 2x4 mm² copper wire
With 2x6mm² copper wire
Copper Wiring in Existing Casing Capping/Regid PVC Pipe/Conduit Pipe.
1x1.5sqmm PVC copper wire
Drawing of Main and Sub-Main Line wiring approved VIR or PVC cable 250 V Grade in Heavy Gauge 16Swg E.T. Conduit Pipe With all necessary accessories
Concealed Wiring in looping in system with 2x1.5 sqmm PVC insulated single of 600V grade in heavy gauge PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.
Drawing 3 phase line 4 wire with approved VIR or PVC cable 660 V grade wire in Heavy gauge 16Swg E.T. conduit Pipe with all necessary accessories
4x4mm2 conductor
4x6mm² conductor
DISTRIBUTION BOARD & MCB
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess inckuding cutting the wall and making good the same in case of recessed conduit as required.
IP 43 - #1K 09 with metal door
6 Way 8+18 Module
8 Way 8+24 Module
Supplying fitting and fixing of Distribution Board ~~ Ekinox³ TPN DB- VTPN for DX³ MCB DB's
Four pole 415 V
Triple pole 415 V
Double pole 415 V
Single pole 240/410 V
Four pole 415V, AC Type 300 mA
Supplying fitting and fixing of RX3 Isolators (35 sq. mm cage terminals with safety shutters)
Four pole
With White Classic Door
1 Way 6 Module
LUMINAIRES AND FIXTURES
With Aluminium housing & integrated electronic driver.
1 Way 6 Module
LUMINAIRES AND FIXTURES
Supplying fitting and fixing of LED MIRROR LIGHT surface or wall mounted with all necessary. Supply, Installation, Testing & commissioning of 1x9 watt LED Mirror light fixture wall mounted with electronic high efficiency electronic driver as complete as required. (Philips Make, Cat No- 31083 shell line or equivalent)
LED Mirror Lights
24W (1182x23x37) mm
Supplying fitting and fixing of LED DOWNLIGHTS surface or wall mounted with all necessary accessories.
Recess mounted downlighter with pressure die-cast aluminium heat sink diffuser in white powder coated finish with integrated driver.
Square slim-fit low profile downlights d
18W Ceiling cutout:210x210 mm, height 16 mm
5W Ceiling cutout:@ 95 mm, height 83 mm
Supplying fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories.
Supplying fitting and fixing of LED STRIP LIGHTS surface or wall mounted with all necessary accessories.
Supplying fitting and fixing of LANDSCAPE LIGHTS surface or wall mounted with all necessary accessories.
Decorative spike light using COB LED as light source
Supplying fitting and fixing of STREET LIGHT surface or wall mounted with all necessary accessories.
LED street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having top opening
15W suitable for pole dia @ 43 mm (max).
Supplying fitting and fixing of deluxe type chandelier made of brass fancy type longitudinal glass, rod or chain as pendant ring LED bulb etc complete with all accessories.
5 lamp glass chandelier fitting
6-9 lamp glass chandelier fitting
Supplying fitting and fixing of LOWBAY LIGHTING surface or wall mounted with all necessary accessories.
Protected LED-COB midbay with PDC housing suitable for ceiling (surface/suspended) mount & available in Wide & narrow beam optics.
50W Wide Beam
Suppplying, Bell/Bell fixing, connecting, testing and commissioning of calling indicator type suitable for 230V as well as battery operated complete with all necessary accessories.
Dingdong Bell
Supplying and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy haning shackle & 30mm length of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs25.00/ mtrs.
AC ceiling Fan '1200'mm sweeps
Supplying fitting and fixing of exhaust fan double bearing self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other petty accessories as required.
Domestic Exhaust Fans
LT PANELS
Supplying and fixing wall/ floor mounted metal board welded construction and fabrication with minimum (50x5) mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/ of flat iron covered with 1 mm MS sheet for mounting of switch gear including painting as required.
Iron frame board (1000x1000x200)mm
Supplying fitting & fixing of 3 phase energy meter, 550 volt of 3 x 5-10, 3 x 10-20, 3 x 20-40Amp capacity.
3 phase energy meter of 3 x 50, 3 x 100Amp capacity
Supplying fittings and fixing complete switch Fuse Unit (S.F.U.)Sheet Steel Re-wirable Main Switch with Pre-Fitted Fuse Wire 50 Hz. 240/415 V.
200 Amp 415 V Capacity
Supplying fitting and fixing of Moulded case circuit Breaker (MCCBs) of the following Amp capacity
with breaking Capacity of 38 kA
Supplying fitting & fixing of 440 volt grade Four pole charge over Main Switch (Best Quality).
200Amp capacity
The panel board shall house:
1 No 4 pole MCCB, 38KA as normal supply incomer;
4 pole 200A Al. busbar;
3 Nos. Current Transformer of 200/5A;
3 Nos. LEDs;
7 Nos 4 pole, 63A MCCB, 18KA as outgoing feeders;
7 Nos 4 pole, 40A MCCB 18KA as outgoing feeders
LT CABLING
Providing laying connection testing & commissioning of the following sizes of 1100V PVC/XLPE Armoured Cables With Aluminium Conductor as per ISI code in bracket, trenches, M.S. cable rods and including the cost of digging of trenches, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required.
With 4 core 70sqmm
Supplying, laying, testing & commissioning of PVC/XLPE Armoured cables with Copper Conductor 1100V, Grade of the following sizes along wall etc in ground including the cost of digging of trenches sand cushions besides laying etc & refilling the same in layers or by supporting them on wall.
4mm² 3 Core cable
4mm² 3 Core cable
4mm² 4 Core cable
itemH1Code69
16mm² 4 Core cable
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
3.5 X70 sq. mm (38mm)
4X16 sq mm (28mm)
4X10sq. mm (25mm)
CABLE TRAY
4X10sq. mm (25mm)
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
375mmx50 mmx 2.0 mm.
Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
EARTHING AND LIGHTNING ARRESTER
Supplying fitting & fixing earthing with copper earth plate 600x600mmx6mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salts etc complete as required.
Copper earth plate electrode
Supplying and laying of 15mm x5mm GI/Copper Strip at 0.50mts, below ground.
With 20mmx5mm copper strip
Supplying fixing connection testing of 8SWG wire along the wall, columns etc, with necessary clamping as required
With copper wire
Supplying fitting and fixing of Copper lightning Arrester with 5nos. Finger at the top & copper base plate at the bottom complete.
With 5ft high copper rod
SAFETY ACCESSORIES
Supply and installation of the following safety accessories to be installed in the electrical panel room.
First aid box (IS marked - as per standard requirements)
Supply and fixing of 440V danger board as per standard with all necessary fixing accessories etc.
Supply and position of 1.1KV grade 2Mtrx1Mtr rubber mat for LT switch boards to suit the switch board. (as per standard and ISI marked)
Supply and fixing of shock treatment/first aid treatment chart in local language, Hindi & English, complete with necessary f
ixing accessories etc.
Supply of 1.1KV rubber gloves
Supply and fixing of 10Ltr capacity of four numbers fire bucket painted as per relevant standard, complete with necessary clamps and fixing accessories etc.
Supplying & Fixing of ABC DRY POWDER Fire Extinguisher including with all necessary accessories.
Supplying Installation fixing ABC DRY CHEMICAL POWDER Fire Extinguisher of 5.0 Kg trolley mounted confirming to IS: 2171 and CO2 Cartridge confirming to IS: 4947 Powder Confirming to 1S:4308.
Supplying installation fixing of Carbondioxide Based Fire Extinguisher (Squeeze grip type) of 4.5Kg Capacity
LOW VOLTAGE SYSTEM
Supplying fitting & fixing Metal Box of following sizes on surface or in recess with suitable size of Phendie Laminated sheet cover in the front icluding painting etc as required.
75mm x 75mm x 60mm deep
Supplying fitting and fixing of Telephone And switchboard Cables
2 Pair 0.50 mm
10 Pair 0.50 mm
50 Pair 0.50 mm
Supply and fixing of the following telephone Krone type junction boxes enclosed in MS box with hinged cover with lock & key arrangements etc. The item including necessary clamping and making good the same in case of recessed mounting as required. All complete as per specifications, drawings and / or as directed by the Engineer
10 - pair KJB
50 - pair KJB
Supply , installation , testing and commissioning of EPABX system upto 32 extensions based on advanced system or equivalent type as acceptable to the client with suitable battery charger, all complete as per specifications and / or as direcyted by the Engineer.
Supplying fitting and fixing of CO-Axial Cables Cables
RG-06 armoured
Supplying fitting and fixing of LAN (COMPUTER CABLES)
CAT-6 Armoured UTP
Supplying and installing Wall or ceiling mounted indoor type Fixed Dome IP Camera with 1/3” 4MP PS CMOS Image Sensor 4MP@25/30fps (2560 × 1440), IR Range of 30 Mtrs,. The items inclluding necessary fixing accessories.
Supply, fixing and termination of high quality rack mounted type patch panel with one number of 24 port POE network switch, fixing frames, links and interconnections, necessary accessories etc., all complete as per specifications, drawings and / or as directed by the Engineer.
Supplying and installing of 32 Channel Network Video Recorder with Max 320Mbps incoming bandwidth Smart H.265+/H.265/ Smart H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 8 SATA HDDs up to 10TB Each, 4 USB (2 USB3.0, 2USB2.0) 2 HDMI / 2 VGA simultaneous video output Support Multi-brand network cameras Support RAID 0/1/5/10 Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro. The items including supply of 4TB hard disk, connectors, pins and providing complete configuration etc.
Supplying and installing of Power Supply Unit along with necessary Battery backup, suitable for 1 nos. 32 channel network video recorder system.
Supplying and installing of 42" LED colour monitor
DG set 82.5KVA
Supply, unloading & handling, position, erection, testing and commissioning of 82.5KVA capacity rating of DG set with standard accessories coupled to alternator, 3 phase, 4 wire, 0.8 PF (lag), 415 V mounted on a channel iron base frame with foot mounting AVM pads, Fuel tank (In Built), Charged battery with leads, hospital type silencer along with exhaust stack of standard height ((as per norms), Composite type acoustic enclosure and standard control panel. The governor shall be of electronic & mechanical type and with auto start facility complete with necessary control wiring/cabling, metering, indication lamps and fixing accessories etc.
Stabilizer 75KVA
Supply, unloading & handling, position, erection, testing and commissioning of 75KVA stabilizer with the following specifications: a) Type of cooling - Air Cooled (single phase operation, 3 phase servo stabilizer); b) Transformer Winding material - Copper; c) Input voltage range - (V L-L) 295V-485V; d) Output voltage - (V L-L) * 415V +/- 1%; e) Input frequency range - 50Hz; f) Systems Type - Micro Controller Based; g) Efficiency - Greater than or equal to 99%; h)Input protection - 125A TP MCCB for Over Load and Short Circuit Protection; i)Output Overload - Electronic Over Load Protection; j)Bypass Switch - Stabilizer By pass Switch; k)Low Voltage protection - Input Under and Over Voltage indication and Cut off; l)Over voltage protection - Electronic cutoff circuit, m)specified time delay set @ +5%/-, 10% of nominal voltage; n)Over load protection - Electronic Over Load Protection; 0)Phase Reverse Sequence Preventor Protection -Phase Reverse Sequence Preventor with Cut off. The item icluding necessary accessories with all complete.
Inverter 3KVA
Sypplying, Erection, testing and commissioning of 3 Phase, single phase, 3kVA 1P -in 1P out online Inverter with suitable BCB (battery circuit breaker), filters and adequate numbers of SMF batteries suitable for 30minutes backup, with necessary fixing accessories etc. Make: Numeric / Consul / Luminous Battery make: Exide/Quanta
Solar Photovoltaic Power Plant
Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-
a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.
b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 5S0Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage frequency.
itemH1Code56
c) Data Monitoring System complete with accessories.
d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.
Supplying fitting & fixing of variable refrigerant volume/flow type air conditioning system with heating and cooling facility including supply of all necessary accessories as required for installation of Air Conditioner (AC)
VRF/VRV Outdoor unit
Supply, installation, testing and commissioning of modular type VRF/VRV outdoor units for cooling and heating applications (heat pump), with multi scroll / rotary compressors with inverter type compressor's, special pre-coated fins, inverter based condenser fan with low noise, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following approximate capacities with R410a Gas. The charges shall include of all freight/tranport, unloading at site, storing, lifting, positionin and effecting connections with necessary accessories as required to complete the installations. The item also inc
luding of power cable terminations and earthing terminations in the outdoor unit.
20HP VRF/VRV outdoor unit heat pump
VRF/VRV indoor unit
Supply, installation, testing and commissioning of following type & capacities of VRF/VRV based Cassette/Hiwall type indoor units suitable for cooling and heating applications completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filter and vibration filter etc. The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor for BMS compatability. The item including necessary supports & fixing accessories etc. with all complete. The item also including of power cable terminations and earthing terminations in the outdoor unit.
2.6 TR four way cassette with windfree panel
1.6 TR one way cassette with windfree panel
1.6 TR hi wall unit
Central controller unit
Supply, installation, testing and commissionng of Touch type power display Central Controller Unit suitable to monitor and control the air conditioning system (indoor or outdoor or temperature setting or status) from central location as well as from remote location (through internet access). The item includes provide necessary compatability for BMS integration etc.
Refrigerant pipe
Supply, installation, testing and commissioning of 16G/18G hard drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications. The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc. The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves. All insulation of exterior run of pipes in the Terrace shall be treated with Weather/UV shield ( Pipe Running in Open to Sky Portion also shall be UV shield ). The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc.
6.4mm to 41.3mm (suitable size as per AC manufacturer's standard requirements)
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
Communiccation cable
Providing and fixing in position the following sizes of uPVC drain pipes of required lengths and installed with necessary couplers, elbows, tees, reducers and "U" trap as required. The item including the cost of 6mm thick nitrile rubber insulation with necessary supports & fixing accessories with all complete.
Environmental & Social Management Plan
itemH4
itemH5
itemH6
itemH8
itemH10
itemH11
itemH18
itemH12
itemH13
itemH14
itemH15
itemH16
itemH17
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BIDDOCUMENTnongwarMEIDP.pdf
Tender Documents • 2.30 MB
specificationnongwar.pdf
Additional Documents • 1.73 MB
TenderDrawings.pdf
Additional Documents • 10.54 MB
ESMPNongwar.pdf
Additional Documents • 4.70 MB
BOQ_1993.xls
BOQ • 0.81 MB
Download all tender documents and submit your bid