Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹34.5 L+₹1.6 L (4.80%)Rejected-Finance 183 MG ROAD JUNGLIGHAT PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹34.6 L+₹1.7 L (5.22%)Rejected-Finance 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹34.8 L+₹1.9 L (5.81%)Rejected-Finance 6A BANAMALI GHOSHAL LANE KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L4₹35.0 L+₹2.1 L (6.41%)Rejected-Finance 89A UPEN BANERJEE ROAD PARNASREE BEHALA KOLATA 700060 WEST BENGAL | KOLKATA | WEST BENGAL | 700060 | L4 | Rejected-Finance Being higher bid value |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8068/B/E8
2022_MES_536792_1
GE/ALP (8068B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹64,000
Yes
8 Sept 2022
9 Jul 2022
8 Aug 2022
9 Jul 2022
6 Aug 2022
23 Jul 2022
Amount
B/R PART Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose Soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.
Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
Material and labour for PCC ( 1:4:8 ) Type D -2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for formwork, flat, rough finished surfaces of concrete to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Material and labour for formwork, flat, rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and as directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
Material and labour for RCC M 25 design mix (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Material and labour for RCC M 25 design mix (using 20mm graded stone aggregate) as in columns, pillars, pier, posts, lintel bands complete all as specified and as directed.
Maerial and labour for RCC M 25 design mix (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels etc complete all as specified and as directed.
Material and labour for RCC M 25 design mix (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for RCC M 25 design mix (using 20 mm graded stone aggregate) as in Chhajja and in shelves and the like complete all as specified and as directed.
Material and labour for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Materila and labour for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Material and labour for 10mm thick plastering in ceiling surfaces in cement mortar (1:3), surface finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick plastering on fair faces of brick wall and concrete surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of new Undecorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with and including 3mm thick wall care putty complete all as specified and as directed.
Material and labour for preparing of new Undecorated plastered or unplastered surfaces of ceiling, pillasters cornices etc and applying 3mm thick wall care putty and two coat acrylic distemper emulsion complete all as specified and as directed.
Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.
Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in cement mortar 1:4 including grinding & polishing etc complete all as specified and as directed.
Material and labour for broken stone or boulders Hard core of gauge n.exc 63 mm, deposited,spread and levelled in layerer n.exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.
Material and labour for PCC type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base for floors and similar works etc, complete all as specified and as directed.
Material and labour for 40mm thick PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as floors, complete all as specified and as directed.
Material and labour for 5mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive etc complete all as specified and as directed.
Material and labour for bedding layer of mortar 20 mm thick finished fair and even in cement mortar (1:4) mixed with liquid water proofing compound on roof complte all as spd and directed.
Material and labour for water proofing treatment with APP modified membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvented primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) Material and labour for APP modified polymeric waterproofing membrane weight not less than 3.00 kg/sqm with centre core as100 micron HMHDPE film. The centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point. The polymeric mix is protected on both sides with 20 microne HMHDPE film with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions and as directed by Engr-in-charge. (c) Material and labour for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface. (d) Material and labour for applying protective coating with bituminous based aluminium paint @ 0.2kg per sqm in two coats compete all as specified and as directed.
Material and labour for 50mm thick sand cusion under layer of floor complete all as specified and as directed.
Material and labour for Machine pressed precast coloured concrete interlocking paver block any shape and size(Rubber moulded) confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and as directed.
Supply and fixing for Powder coated aluminium sliding windows for (three tier) with shutter styles 40mm X 20 mm sheet thickness 1.5 mm Two shutter glass and one shutter of wiremess consisting of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100 mm X 44 mm X 1.5 mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminum beads locking arrangements with each shutter incl aluminum grill complete all as specified and as directed.
Supply and fixing Steel rolling shutters, with out ball bearing, as specified including top cover, anchoringrod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type etc complete all as specified and as directed with 1.25 mm thick laths.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for 75mm thick cement concrete type C-2 (1:3:6) (using 40mm graded stone aggregate) as in plinth protection,sub base similar works complete all as specified and as directed.
E/M PART Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out in soft/ loose soil
Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and getting out in Hard rock /road / harndstanding complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in any type of soil complete all as specified and as directed.
Removing excavated material n exc. 1.65 Km and depositing inside the defence land n.exc 1.5m where directed at a level above the starting point in any type of soil.
Supply, Installation, Jointing, Testing and Commissioning of Medical grade Copper Pipe as per BS2871 in trench of size 42 mm OD X 1.2 mm wall thickness. complete all as specified and as directed.
Supply and laying GI pipe medium grade for copper pipe protection of size 80mm dia. complete all as specified and as directed.
Material and labour for fixing of Isolation ball valve for 42 mm dia copper pipe for medical usage with brass adopters make: Janya/ RB or equivalent complete all as specified and as directed.
Material and labour for Boring of holes under road, pavement, hard standing passing for 80 mm GI/Copper Pipe using necessary T&P. complete all as specified and as directed.
Material and labour for construction of measonary valve pit chamber with burnt brick (Sub class "B") in cement mortor (1:6) and 10 mm thick plastering in cement mortar (1:4) and PCC (1:4:8) type D-2 in foundation bed of size internally 600 mm x 600 mm x 600 mm with 3 mm thick MS sheet cover with locking arrangement hinged with 40 x 40 x 5 mm angle iron frame embeded in PCC (1:3:6) type C-1 etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces completed including earth work in soft/Loose soil complete all as specified and as directed.
Supply, Installation, Jointing, Testing and Commissioning of Medical grade Copper Pipe as per BS2871 in trench of size 12 mm OD X 0.7mm wall thickness. complete all as specified and as directed.
Supply, Installation, Jointing, Testing and Commissioning of Medical grade Copper Pipe as per BS2871 in trench of size 15mm OD X 0.9mm wall thickness. complete all as specified and as directed.
Supply, Installation, Jointing, Testing and Commissioning of Medical grade Copper Pipe as per BS2871 in trench of size 22 mm OD X 0.9mm wall thickness. complete all as specified and as directed.
Supply, installation, testing and commissioning of Gas outlet points/terminal units with probes for Oxygen, vaccume/suction, Medical Air 4 Bar/7 Bar, CO2, front loading type, BS type. complete all as specified and as directed for the following :-
Oxygen Port (outlet)
Vacuum Port (outet)
Nitrous oxide Port (outet)
Supply and fixing BPC flow meter (0-15 LPM) including humidifire bottle complete all as specified and as directed. Make : Mes/ LMPL/ Azad or equivalent
Supply and fixing ward vacuum unit including regulator, gauge and 600 ml polycarbonate jar for negative pressure complete all as specified and as directed. Make : Mes/ LMPL/ Azad or equivalent
Material and labour for fixing of Isolation ball valve for 15mm dia copper pipe for medical usage with brass adopters complete all as specified and as directed. Make: Janya/ RB or equivalent complete .
All as per item Ser No 52 here-in-before but of size 22mm complete all as specified and as directed.
Material & labour for PCC 1:2:4 type B2 (20mm graded aggregate) as in foundation/ platform/ for road repair and other works complete all as specified and as directed.
Hindustan Traders
Tirupati Buildcon Pvt. Ltd.
AUTO ELECTRICALS
M/S AVIJEET INTERNATIONAL
KWALITY CONSTRUCTION
M. M. C. AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .