SPECIAL REPAIRS TO BLDG NO T 32 MI ROOM OF ESD KANKINARA AND CERTAIN MINOR WORKS AT KANKINARA UNDER GE NORTH KOLKATA

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, hips, valleys and flashings complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc ) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified & directed.

S & F anodized aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and directed.

S & F 6mm thick high pressure steam cured non asbestoes fibre cement designer ceiling board of size to suit grid mould (605x605 mm as specified above) and fix in grid mould with necesssary fixing arrangement as per manufacturer's instructions complete all as specified and directed. (Make : Everest/Rhino/Charminar)

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (300x200) x7mm thick as in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 of each tile in floors, set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm and n. exc 0.42sqm of each tile in floors, set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for non skid ceramic tiles, white 7 to 8mm thick(square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply and fix in repair soap dish, vitreous china white approximate size 160x160x90mm and fixed in position complete all as specified and directed.

Supply and fix in repair brackets for WHB and Sink made out of 20mm bore GI pipe, medium grade, 600mm long and embeded into the wall with PCC (1:3:6) type C1 complete all as specified and as directed.

Supply and fix in repair chormium plated hand shower 105mm dia round shape single flow with air effect (ABS body and face plate chromium plated with rubit cleaning system) for fixing in 15 mm bore pipe complete all as specified and as directed.(Model No. HSH-1717 of Jaquar or equivalent)

Supply and fix in repairs vitreous china wash hand basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Supply and fix Brackets, brass chromium plated for tubular towel rail , 20mm dia complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connections, complete all as specified and as directed.

Material and labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar tap 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair Vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian Type pedestal pan (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix Harrison Curtain Rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc.1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.

Supply and fix 2nd class hardwood, plain, solid, straight chowkhats and frames, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with two coats of tar or coal tar black paint complete all as specified and as directed.

All as per item no 33 above but treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.

All as per item no 33 above, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, area n exc 0.1 sq. m each, complete all as specified and as directed.

Material and labour for Cutting holes in brick walls for inserting holdfasts for exc half brick but n. exc one brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone agg) for filling concrete in brick wall for fixing holdfasts complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces all as specified and directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix small fittings such as window/doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc. 200cu cm each complete all as specified and as directed.

Supply and fix 150mm, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

S & F factory made uPVG white colour Sliding window, Area not exceeding 2.00 sqm each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening shall be measured for payment purpose.)

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for Metal frame complete all as specified & directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Material and labour for taking down plastering on lathing (other than wire netting) without removing lathing in cement mortar(one side only measured in cases where both sides are plastered) complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Materials and labour for rendering 20 mm thick cement plaster in cement mortar (1:4) in two layers, each 10mm thick, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified and as directed (WPC shall be measured and paid separately).

Materials and labour for preparation of new treated plastered surfaces of wall and applying plaster of paris of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two or more coats of distempering with1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour as per manufacturer's specification complete all as specified & directed.

Materials and labour for preparation of new treated plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed.

Supply only integral water proofing compound complete all as specified & directed.

Materials and labour for brick work with subclass 'B' brick; old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified & directed.

Surface excavation not exe 30cm deep and averaging 15cm deep getting out in soft /loose soil complete all as specified and as directed.

Demolition of Stone sett paving laid bedded and pointed in any mortar of any description or thickness complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

All as per item no 60 above but exc 1.5 m and n exc 3.0 m depth complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D2(using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for RCC foundations 1:1.5:3 type A1(20 mm graded stone aggregate), including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete concrete complete all as specified and as directed.

Material and labour for RCC 1:1.5:3 type A1(20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Material and labour RCC 1:1.5:3 type A1(20 mm graded stone aggregate) as in Slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour RCC 1:1.5:3 type A1(20 mm graded stone aggregate) as in Chajja complete all as specified and as directed.

Material and labour RCC 1:1.5:3 type A1(20 mm graded stone aggregate) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and finished rough complete all as specified and as directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n. exc 200 mm thick (horizontal or sloping) and finished rough complete all as specified and as directed.

M & L for use and waste of formwork to chajjas, troughs and similar works including edges and finished rough complete all as specified and as directed.

M & L for use and waste of formwork to sides and soffits of floor or roof beam, lintels, shleves including supports, etc. and finished rough complete all as specified and as directed.

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished rough complete all as specified and as directed.

Material and labour for brick work with fly ash bricks, class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work, half brick thick, built in cement mortar (1:4) with fly ash bricks, class designation 75, old size, straight or curved on plan exc 6m mean radius complete all as specified and as directed.

Material and Labour for 25 mm thick D.P.C to horizontal surface of brickwork with cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) including necessary formwork and applying evenly a coat of blown type bitumen @ 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed .

Material and labour for 100 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in bases of flooring and finished the surface even and fair complete all as specified and as directed.

Material and labour chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors laid over 15mm thick screed bed in CM(1:6) including set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for 5mm thick cement plaster in Cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified & directed.

Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed .

Material and labour for applying three coats of white wash on new plastered surface of ceiling including preperation of newly plastered surface complete all as specified and as directed .

M&L for Water proofing treatment with APP based standard membrane over PCC padding of roof with the following course of treatment:- (a) Apply bituminous primer @ 0.40 Kg/Ltr per sqm of the surface area including cleaning the surfaces (b) Apply APP plastomeric bituminous based mineral finished water proofing membrane polyster reinforced(4Kg/sqm) with 10 cm over laps and torch bonded at joints including surface preparation and after application of treatment as per manufacturers instruction complete all as specified and as directed

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed .

Supply and fix 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete as specified and as directed.

Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.

Material and labour for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders as required complete all as specified and directed.

Supply and fix 20mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and as directed.

Supply and fix wash hand basin, vitreous china white , flat back of size 550 x 400 mm including cutting for and pinning ends of brakets or erecting stand complete all as specified and as directed .

Supply and fix vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

Supply and fix vitreous china urinal, size 625x375x315mm white, with grating and union for discharge pipe, necessary fittings complete all as specified and as directed.

Supply and fix 10 litre capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed .

Supply and fix 15mm bore Bib taps, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed .

Supply and fix 15 mm bore Stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed .

Supply and fix 32 mm dia waste coupling of PTMT full threaded (min weight 45gms) complete all as specified and as directed .

Supply and fix PVC connection 15 mm bore with PTMT nut of length 600 mm complete all as specified and as directed

Supply and fix 20 mm bore gun metal gate valve with iron wheel head, screwed both ends complete all as specified and as directed.

Supply and fix 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed .

Supply and fix in repair Grating doom 100 mm dia of PTMT ( Min weight 25 gms ) complete all as specified and as directed.

Supply and fix Rotational moulded polythene water storage tank 500 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and as directed .

Supply and fix 50 mm dia High density polyethylene pipes ( HDPE ) of pressure rating 6 Kgf/ Sqcm fixed to walls , ceiling or laid in floors complete all as specified and as directed .

Material and Labour for 75 mm thick plain cement concrete 1:3:6 type C2 ( using 40 mm graded aggregate ) as in plinth protection, laid in bays including filling joints with bitumen gola using 80/25 (1 part of bitumen mixed with 3 parts of sand) finish the surface even and fair complete all as specified and as directed .

Material and labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and well ramming to a true surface complete all as specified and as directed.

Material and Labour for applying two coats of cement based paint on new wall surface including preperation of new plastered surfaces complete all as specified and as directed .

Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under, and haunching against the sides of pipe after they are laid and tested for 100 mm dia of pipes complete all as specified & directed.

Material and labour for salt glazed stoneware drain pipe 100 mm bore grade 'A' laid in trenches and jointed in cement mortar (1:1) and tested in repair complete all as specified and directed.

Supply and fix UPVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and as directed .

Supply and fix in repair 110 mm bore PVC (SWR) bend , any radius complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified & directed.

Excavation in post holes(or similar holes) in soft/loose soil each n exe 0.50cum, getting out, returning fiiling in and ramming earth or broken rubble mixed with earth around, in layers not exe 25cm, watering and removing surplus soil to a distance n exe 50m and making good surface complete all as specified and as directed

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 and painted with one shop coat of zinc chrome primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified & directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fittings and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing serviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

Taking down ceiling fan / exhaust fan / wall mounted fan from existing position of high rise shed/ bldg, dismantling blades and removing fan & blades and keep in safe custody/in office store for refixing the same in same or different locations complete all as specified and directed by Engr-in-charge.

Hanging only ceiling fan and connecting up including provision of cable of suitable size from ceiling rose or connector to fan complete all as specified and directed.

Hanging only exaust fan and connecting up including provision of cable of suitable size from ceiling rose or connector to fan complete all as specified and directed.

Material and labour for point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth dolly for One light point controlled by one switch complete all as specified as directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces shall deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).

All as per Item No 125 but one ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.

All as per Item No 125 but one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per Item No 125 but one 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per Item No 125 but one call bell point controlled by one switch complete all as specified and directed.

Material and labour for point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth dolly for one call bell point controlled by one switch on the independent board complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces shall deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall deemed to be included in the qouted rate. (iii) Cost of chase cutting if any for wiring shall deemed to be included in the quoted rate).

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt complete all as specified and directed.

Supply and fix socket outlet 3/5 pin 5 Amp 240 volt complete all as specified and directed.

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all complete as specified and directed

Supply and fix switch socket combination 3/5 pin 6/16 Amp flush type 240 volt.complete all as specified and directed

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep complete all as specified and directed

Supply and fix bell push 6 amps complete all as specified as directed

Matetial and labour for buzzer, ding dong type, AC 230 volt single pole complete all as specified as directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed

Supply and fix celling rose surface type, 3 terminal of min da 63.5mm complete all as specified and directed

Supply and fix box type luminiare, pre-coated in white and pre-wired for single LED tube light 4 ft, capacity suitable for single T8 LED tube rod 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. (Make:Century LED Ltd Cat Part No.- KCCF02000863 / Philips Cat Part No.- TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LED tube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE)

Supply and fix LED light fitting (ceiling) recessed/ surface mounted 600mm x 600mm, 36 watt LED provided with high transmission acrylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum ceiling lamp white powder coated CRCA housing luminaire including necessary fixing material such as clip, etc and electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of light fittings including taking down unsv light fittings complete all as specified and directed. (Make : Century LED Ltd Cat Part No. PCVP036C or equivalent in Wipro/ Philips/Bajaj/Crompton)

Supply and fixing LED batten mirror light 10/12 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old u/s light fittings any type complete all as specified and as directed. (Make : Century LED Ltd Cat Part No. BWMP010C2136 or equivalent in Wipro/ Philips/Bajaj/Crompton)

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends, Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 6 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall deemed to be included in the quoted rate).

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC conduit etc and also making good the disturbed surfaces shall deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including make good the damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.(Note:- MCB shall be measured and paid seperately) (Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells).

Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.(Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells)

Supply and fix Blanking plate for MCB DB of suitable sizecomplete all as specified as directed.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed. (Make: C&S /L&T/ Indoasian/ Havells)

Cutting chases, pinning in brick/ stone/ concrete and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed by Engr-in-charge.

Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver, prewired, to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. (Make - Century LED Ltd Cat Part No. HWAR012C0168 or equivalent in Wipro/ Philips)

Supply , fixing , testing and commissioning of exhaust fans metal body AC, single phase 230/ 240 V of size 300 mm sweep, heavy duty with blades, frame and louver complete with all accesories suitable for single phase 230 Volts AC supply with necessary electrical connection with three core flexible cable of suitable size and fixing arrangement such as suitable size of fastener, nut bolts and washer and making a suitable hole on wall for fixing arrangement complete all as specified as directed.(Make :Havells / Bajaj /Philips/ Crompton)

Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI brackets, clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete all as specified and directed. (Make - Century LED Ltd Cat part No. - SPSP045C / Philips Cat part No. - BRP 409 LED 040 CW HO MR FG S1PL PSU GR / Wipro Cat part No. - LR02-501-XXX-57-XX or equivalent)

Supply, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 10 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection complete all as specified and directed.

Material and labour for point wiring (surface type) for One light point controlled by one switch with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductor 1.5 sqmm (nominal area) and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuty conductor drawn through and including PVC casing-caping/ conduit pipe medium grade of suitable size but not less than 20 mm and accessories including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel pain of approved colour over a coat of red oxide zinc chrome primer and covered with 3mm thick insulated hylum sheet cover for fixing of switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth dolly complete all as specified and directed. (Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces shall deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate.)

All as per item on 162 but one ceiling fan/ exhaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item on 162 but one 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

Supply, install, testing and commissioning of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking breaking capacity 35/36 KA complete all as specified and directed.

Supply and fix triple pole and earth enclouser with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp sheet steel enclosure fitting with plug & socket metal clad box including insulated neutral link, adjustable DIN rail channel and connecting links complete all as specified as directed.

Supply and fix MCB TPN 40 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs including taking down the old unserviceable MCB complete all as specified as directed.

Supply and fix MCB single pole 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete incuding taking out the old unserviceable oneall as specified as directed.

Supply and fixing LED flood light 100 watt 230 V AC with thermal management in multiple optics die cast aluminium housing equipped with IP66 protection, with impact and corrosion resistant complete with driver and surface mounting device type LED 100 Watt with lens including all fixing arrangements required to be fixed on shed/wall/surface/channel with suitable size of fixing items such as champs, nut bolts and washer of suitable size connecting with existing electric supply with three run of 1.5 sqmm single core copper conductor cable with flexible PVC conduit including including taking down old any type of light fittings complete all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, ISI marked in wall, fixed to pole, wall/roof including fixing arrangement such as clamp, nut bolt, etc with cable end, lugs including required size of aluminium thimble for making connection for 35 sqmm 3.5 core cable completed all as specified and directed.

Supply, fixing, installation of Air Circulator fans 230 volts single phase oscillating 600 mm sweep, metal body heavy duty to be fitted, mounted on wall/ high rise shed mounting including all fixing arrangement required to fixed on wall / shed/ surface with suitable size of fixing items such as clamps, nut bolts and washer of suitable size including making connection with existing electric supply with three run of 1.5 sqmm single core copper conductor cable with flexible PVC conduit including all accessories complete all as specified and directed. (Make - Havells/ Bajaj/ CG)

Supply , fixing , testing and commissioning of exhaust fans metal body AC single phase 230/ 240 V of size 450 mm sweep heavy duty with blades, frame and louver complete with all accesories suitable for single phase 230 Volts AC supply with necessary electrical connection with three core flexible cable of suitable size to be fitted, mounted on high rise wall/ shed mounting including all fixing arrangement required to fixed on wall / shed/ surface including fixing arrangement such as suitable size of fastener, nut bolts and washer and making hole on high rise wall/ shed complete all as specified as directed. (Make :Havells / Bajaj /Philips/ CG)

Rounaq Enterprise

BHARUKA ENTERPRISES

PODDAR SALES CORPORATION

J B NATH AND SON

RBS Builders

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION