CERTAIN REPAIR TO WALKWAYS, PAVER TILES, KERB STONE AND MISC ALLIED WORKS AT OTM AND MD ACCN AREA UNDER AGE B/R-II AT NAMS

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the premises etc complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F machine pressed coloured (yellow, red, black, white as directed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed.

All as per Ser No Item No 4.00 here-in-before but except paver block, dismantling and shall be reused after necessary cleaning and making good all as specified and directed.

M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 including demolition of old PCC kerb stone of any description complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring laid in panels including finishing the cement concrete surface even and smooth with using extra cement including necessary form work etc including demolition of old cement concrete complete all as specified and directed.

S&F 4mm thick acrylic sheet board of High quality with Media printing of 3 m of best quality incl stainless steel stud (size of board, design of bd, type of print on sheet, size of stud not less than 35mm x 22mm dia, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets.Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm.

Dismantling existing old vintage damaged and rusted / faded road sign boards complete all as directed .

S&F for HIP RATRO radium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE), incl dismantling existing old vintage damaged standing sign board complete all as specified and directed.Note-Composite panel sheet, Stainless steel pipes will be measured and paid separately.

S&F, in repair, for 5 mm thick ACP (Aluminium composite panel) board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed.

M&L for glow sign board frame / standing sign board made out of stainless steel tubular / flat / angle as in any size, dia and stainless steel of grade A-ISI 304(1818) complete all as spd and directed

S&F decorative stainless steel dome 65mm to 75mm dia complete all as spd and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for heavy duty, exterior grade (Durastone of Somany/Endura of Johnson or equivalent as approved by GE) of any size 12 mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for preparation for old concrete, brick, kerb stone, asbestos cement surfaces and applying one coat of synthetic enamel paint of any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L for 15 mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) complete all as specified and directed.

Material and labour for two coats of Acrylic smooth exterior paint of required shade on new plastered surfaces of walls (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer including preparation of surfaces complete all as specified and as directed.

Material and labour for applying one coat of Acrylic smooth exterior paint of required shade on old plaster surface of walls incl preparation of surfaces (one coat applied @ 1.67 Ltr/10 Sqm each coat) complete all as specified and as directed.

M/s Vijay Construction Co. (BID ID -3306839)

Mahajan Builder (BID ID -3302191)

Chander Mohan Arora Contractor (BID ID -3301974)

AS CONSTRUCTION (BID ID -3307294)

M/S JASPAL CONSTRUCTION CO (BID ID -3301828)

tarvinder singh (BID ID -3306867)

GEE EMM ASSOCIATES (BID ID -3301485)