84800SPECIAL REPAIR TO INTERNAL AND EXTERNAL ROADS IN VICTORIA ROAD, OLD KG LINES, NEW KG LINES, GHORPADI, SSRC INCLUDING PAINTING OF SPEED BREAKERS UNDER GE (NORTH) PUNE.

Amount

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50 m and stacking complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 7.5 cm (consolidated thickness) with coarse aggregate (63 mm to 40 mm size) spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparing of unsurfaced water bound macadam / bituminous macadam/ scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 7.5 kg per 10 Sqm complete all as specified and as directed.

M&L for Premix bituminous macadam (consolidated thickness 75 mm or less) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 12 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for preparing of black top scarified surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 2.5 kg per 10 Sqm complete all as specified and as directed.

M&L for bituminous premix asphaltic semi-dense concrete using paving bitumen (VG-30 grade) , 30 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and as directed.(Note : Quantity of bitumen shall be provided as per design mix approved by GE.)

M&L for berm filling by moorum or red bajri (spread thickness 75 mm thick) spread, rolled, watered and consolidated to gradient and camber required as in side berms complete all as specified and as directed.

M&L for repairs to pot holes any depth n. exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer (VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous macadam, well rammed and and sealed with binder @ 9.80 Kg (VG-30) per 10 Sqm binded with 0.09 cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed bitumen macadam binder and chippings) laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floor, apron etc., laid dry and pointed in any mortar complete all as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L for hardcore of gauge n exc 63 mm deposited , spread and levelled in layers n. exc 15 cm thick , watered and rolled /rammed to a true surface complete all as specified and as directed..

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for machine pressed precast cement concrete coloured interlocking tiles, paver block, with grey cement and pigment any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/ pavement complete all as specified and as directed. NOTE : (i) Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

M&L for 40 mm thick crushed sand filling under floors as cussioning spreading leveling under floors including watering and consolidation all as specified and as directed.

Taking down old unserviceable sign board and S&F retro reflective sign board of size 900 mm x 600 mm fixed both side on board made out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm bore. The board shall be provided with reflective tape of quality high intensity chequared type blue colour, letter / symbol and shall be written in white colour writting of approved shape. The sign board shall be supported on 1 No post of 60 mm bore stainless steel pipe, 304 series 3 m long with round moulded design on top duly embedded in ground of size 450 mm x 450 mm x 600 mm in PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) including necessary excavation / earthwork in any strata etc complete all as specified and as directed.

Taking down old unserviceable sign board S&F retro reflective sign board of size 1200 mm x 900 mm fixed both side on board made out of out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm bore. The board shall be provided with reflective tape of quality high intensity chequared type blue colour, letter / symbol and shall be written in white colour writting of approved shape. The sign board shall be supported on 2 No post of 60 mm bore stainless steel pipe, 304 series 3 m long with round moulded design on top duly embedded in ground of size 450 mm x 450 mm x 600 mm in PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) including necessary excavation / earthwork in any strata etc complete all as specified and as directed.

M&L for marking 2.00 mm thick centre, stop line, dashes, arrows, brackets & similar work on road surface as per IRC pattern with thermo plastic paint of approved quality & make with 8% glass beads laid at temprature 160 C with a special applicator machine including surface preparation complete all as per manufacturer's instructions & traffic division arrangement.

S&F in repairs solar cat eye aluminum alloy small size 125 mm x 125 mm x 25 mm with (shank 65 mm) of high efficiency mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V / 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as permanufactures instructions etc. all as specified and directed.