PROVN OF STAND BY MSC AND OC IN BLDG NO P-69 AT AF STN JAIPUR

Amount

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.

Ditto all as per item No. 1 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each.

M & L for second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core constuction with particle board, covered with decorative face venner one side with lipping/rame to match complete all as specified and directed.

M & L for 30 mm thick factory made second class hardwood glazed and skelton shutters for windows, open rebated and prepared to receive glass, gauze etc with edges of sash bar any number and framing moulded, fitted with cut and mitered beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, Section 8.24 (b) and fitted to chowkats complete all as specified and as directed.

Ditto all as per item No. 5 here-in-before but 30 mm thick for window, ventilators etc are provided with stiles and rails as specified in SSR part-I, section 8 clause 24(b) without sash bars.

S&F but hinges of size 100 mm, heavy duty, cold rolled mild steel complete all as specified and directed.

S&F but hinges of size 75 mm, heavy duty, cold rolled mild steel complete all as specified and directed.

S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 125 mm long aluminum anodised handles cast type complete all as specified and as directed.

S & F 150 mm long aluminum anodised handles cast type complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue anodized, with hard drawn steel spring, overall length of cover plate 150 mm dia, complete all as specified and directed.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

M&L for Framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe -290, Gde-E-165 complete all as directed

M&L for Mild steel small articles such as flat iron 25 x 3mm thick for hold fasts etc conforming to Fe -290, Gde-E-165, all as specified and as directed.

M&L for cutting in brick walls built in cement mortar depth of embeded portion of hold fast exc half brick and not exc one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L for preparation of old surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

S&F venetian blind, polyster, MSR-116, any colour indoor, manualy operated, mounting on harware, ASIN B089S2S3FV complete all as specified and directed.

S&F for wall panelling, 12 mm thick ply wood with 1 mm thick sunmica, over and including second class hard wood frame over 2.5 cm x 2.5 cm and 4.00 cm x 2.5 cm battern fixed on wall with stainless screws @ 400 mm c/c including second class hard wood beading (decorative type) on edging or joinst complete all as specified and directed.

Complete removal of existing treatment on walls, providing 3 mm thick wall care putty, preparation of putty surface, applying two or more coats of 1st quality acylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer's specification of required shade and the surface even and smooth over a coat of primer complete as per manufacturer's specification.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 Ton.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of capacity 20 Amps

M&L Wiring for circuit/submain wiring (2x4.0 sq. mm+ 1x4 sq. mm) alongwith earth wire with FRLS PVC insulated copper conductor, single core cable in surface/ recessed (PVC Casing Caping) as required complete all as specified and as directed.

Material and labour for point wiring complete with PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 2.5 sqmm,1100 volts grade drawn through and including PVC Casing Caping of suitable size at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. with necessary fixing accessories and earth continuity conductor cable of size 2.5 sqmm green colour connected to common earth and earth dolly, including pressed steel terminal boxes concealed in wall covered with modular plate for mounting switch/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for 5/15 AMps Socket outlet independent board complete all as specified and as directed.

S&F Modular type Switch socket Combination 16A, 6 pin, 3 module

Material and labour for point wiring complete with PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC Casing Caping of suitable size at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. with necessary fixing accessories and earth continuity conductor cable of size 1.5 sqmm green colour connected to common earth and earth dolly, including pressed steel terminal boxes concealed in wall covered with modular plate for mounting switch/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for One Light/Fan point controlled by one switch with cable 1.5 Sqmm.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as spd and directed.

S&F Modular switch 1 way 6A, 1 module complete all as spd and directed.

S&F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply & fix wall mounted fan 230 volts single phase oscillating 400 mm sweep complete all as specified and directed.

M.S. ENTERPRISES (BID ID -3111395)

ANKIT BUILDERS (BID ID -3124753)