Ghangala Village estimate for augmentation of water works and laying of pipe line under JJM category II Construction of brick lining 1 No. SS Tank, RCC 1 No. HLT,1 No. Filter bed, 1 No. CWT, supply and erection of pumping machinery and laying of pipe

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (At W/W ) 700 LPM, 45 mtrs head 12 BHP

Supply, erection, testing and commissioning Wall mounted (B) Raw water pump set (At W/W ) 700 LPM 12 mtrs head 5 BHP

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 700LPM 45 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 700 LPM x 45 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pump set 700LPM 12 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 700 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply and fixing following CI D/F pipe and specials/sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the fundation well of pump chamber for all rew water and clear water pumping set at w/w in position as per specification given in schedule No.II B) CI D/F pipes 250mm i/d

B) CI D/F pipes 150mm i/d

Supply erection testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 guage with M.S. bolts made of M.S. flat and C.I. flange welded on it with collar one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swell bend with C.I. base plate fixed with anchor bolts in water tank haudi 8" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge

Supply erection , testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduct pipe & copper wire etc. as per approved specifications.

Providing & fixing celling fan 1400 mm 56" with speed adjuster make (make Crompton, usha, Bajaj) complete in respect.

Bidder Name

Amount

SANJAY KUMAR CONT(GSTN-NA)

BALJIT SINGH CONTT(GSTN-NA)

SUKHBIR SINGH CONT(GSTN-NA)

BALJIT SINGH CONTT

SUKHBIR SINGH CONT

SANJAY KUMAR CONT

SUKHBIR SINGH CONT