CERTAIN REPAIR TO JOINERY, FLOORING, PLASTERING AND SANITARY FITTINGS IN BLDGS OF 58 GTC AT HAPPY VALLEY UNDER GE SHILLONG.

Amount

Taking down of cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

M&L for Rendering 10mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound, ISI marked.

Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as directed by Engr-in-Charge.

Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as directed by Engr-in-Charge.

Taking down shutter of any description including all builders hardware of size exc 1 Sqm but n.exc 2 Sqm each etc complete all as specified and as directed.

Taking down shutter of any description including all builders hardware of size n.exc 1 Sqm each etc complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides ( feathered edge ) , or of veneered particle board medium density , wood particle board with commercial face veneers, fitted to chowkat complete all as specified and directed.

S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, , open rebated and prepared to receive glass or gauge with sash bars of any numbers , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) and fitted to chowkat etc complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixing in the frame at site complete all as specified and directed.

S&F PVC door frame, solid, of size 50mm x 47 mm made out of plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

S&F tower bolts, Aluminium anodized, 150 mm size, barrel type of extruded section, complete all as specified and as directed.

S&F tower bolts, Aluminium anodized, 125 mm size, barrel type of extruded section, complete all as specified and as directed.

S&F handles , Aluminium anodized, cast type 150 mm size, complete all as specified and as directed.

S&F handles , Aluminium anodized, cast type 125 mm size, complete all as specified and as directed.

S&F in repairs GI mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick glass one side frosted , glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

Dismantling of timber scantling over 40 Sqcm in section in any position (unframed work) complete all as specified and as directed.

M&L for 2nd class hard wood in scantling, clean sawn, timber fixed complete all as specified and directed.

Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and as directed.

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling, complete all as specified and directed.

M&L for 2nd class hard wood Plain fillets square, rectangular or triangular in section , clean sawn, secured with nails or beads ,sectional area exc 6 Sqcm but n.exc 13 Sqcm complete all as specified and as directed.

Dismantling boarding of any description and fixed any position with nails complete all as specified and as directed.

M&L for 2nd class hard wood, 20 mm thick boarding, planed one side with butt joints fixed with nails as in eaves board etc complete all as specified and directed.

M&L for preparation of new surfaces of ceiling of any description and applying two coats of white wash complete all as specified and directed.

M&L for preparation of wood or wood based materials new surfaces of any description and girth, not otherwise described and treated with two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new wooden surfaces n.exc.10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description in any position not otherwise specifically provided for etc complete all as specified and as directed.

M&L for 40mm thick PCC, type B1, (1:2:4, using 20 mm graded stone aggregates) , as in flooring and paving etc finished cement concrete even and smooth with using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC, type C-2, (1:3:6, using 40 mm graded stone aggregates) as in plinth protection and finishing the cement concrete surfaces even and smooth with using extra cement complete all as specified and as directed.

M&L for 100mm thick PCC, type B2, (1:2:4, using 40 mm graded stone aggregates) as in floor , hardstanding, and pathway and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Dismantling floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed.

M&L for Vitrified ceramic tiles, light shade, 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over screed bed 15 mm thick in cement sand mortar (1:6) complete all as specified and directed

All as per above item No 39.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:4.) complete all as specified and directed

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 300 x 200 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including and over 15 mm thick screed bed or bedding in layer in cement sand mortar 1:4, laying floor finishes finished fair and even complete as specified and directed.

Demolition of brick or stone boulder masonry, precast concrete block walling in any position built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over a coat of wall primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Sona / Hindware.

S&F in repair 15 mm bore Pillar tap , fancy type cast copper alloy, with capstan heads chromium plated , screwed down high pressure with or without lettered ' Hot ' or ' Cold ' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make:- Prayag / Hindware / Sona.

S & F in repair 15 mm bore CP fancy type bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make:- Prayag / Sona / Hindware.

S&F in repair 15mm bore stop cock fancy type, chromium plated , screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. Make:- Prayag / Sona / Hindware.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag / Sona / Hindware.

S & F in repairs 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S&F in repair Bib tap of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed.Make:- Prayag / Pearl/ Hindware.

S&F in repair Health Faucet (ABS) with 1.20 mtr PVC flexible tube & ABS wall hook complete all as specified and directed. Make : Hindware Cat part no. F160023 or equivalent make of Prayag / Pearl.

S&F in repair for grating doom 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.Make:- Prayag / Pearl/ Hindware.

S&F in repair Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed . Make:- Nirali /Bluestar / Hindware.

S&F in repair curtain rail 20 mm dia , mild steel chromium plated with fixing brackets, stops, and rollers etc complete all as specified and as directed .

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Cera / Hindware.

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Cera / Hindware.

S & F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 15 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 20 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook complete all as specified and as directed.

S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering etc complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L type hook and washers, in roofs, walls etc. with grade of zinc coating 120 gram per square metre complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gram per square metre complete all as specified and directed.

Ms Amrik Singh Bahra

S K Construction

M/S SR BUILDERS

S K DEY

M/s J. C. CONSTRUCTION