Repairing_classIV_quarter

Amount

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk miti including finishing the surface to the required finish complete. HSR item No. 16.51

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work (HSR item No. 16.60)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint HSR item no. 16.5

Providing two coats of exterior acrylic emulsion first quality paint complete in all respect HSR item no. 16.79b

Scraping cement plaster complete in all respect (HSR item No. 8.32,c

10 mm thick cement plaster 1:3 complete in all respects. (HSR item No.15.51)

12 mm thick cement plaster 1:4 complete in all respects. (HSR item No.15.4)

Chowkate of commercial hard wood such as hillock ,champ, chiknassy and chaplash etc ( Non coniferous timber other than teak conforming to I.S specification No. 1003 kiln seasoned of doors and windows including iron hold fasts corner straps screws bolts for hold fasts etc complete fixed in position complete in all respects. (HSR item No.17.12)

Commercial hard wood such as hillock champ etc door shutter with 2 No. 12MM plywood pennel complete in al respect HSR item No. 17.30 a

Factory manufactured solid flush door shutters with block board core as per I.S No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin hot pressed conforming to I.S 2202 part-I and II fixed in postion including iron hinges screws chocks/cleats and stops etc (excluding the cost of any fittings other that specified the same in position: complete in all respects. (HSR item No.17.93.(a)-(ii) (30mm thick)

Factory manufactured pennelled and glazed door shutter of commercial hard wood complete in all respect HSR item No. 17.91,b (35 mm thick)

Wire gauze fixed on chowkats with 25 mm thick cover moulding of full width of commercial hard wood such as hollock, champ chikrassy and chaplash etc., (Non-coniferous timber, other than teak, conforming to I.S. specification No.1003, kiln seasoned). HSR item No. 17.33

Supplying and fixing glass panes with moulding of commercial hard wood such as hollock, champ, chikrassy and chaplash etc.(Non coniferous timber other than teak, conforming to I.S. specification No.1003, kiln seasoned). (HSR item No.17.36(b) (3 mm thick)

Cost of aluminium fittings complete for doors and windows, such as tower bolts,handles,etc.,and screws for these fittings (excluding sliding bolt) (HSR item No.17.72A.) for single leaf shutter

Providing and fixing sliding bolt with nuts and screws etc complete(b)(i) size 300mmx6mm complete in all respects. (HSR item No.17.83(c)(ii)

Providing and fixing in position HCI soil waste vent or antisyphonage pipes to ISI specification of ELC manufacture or of any other reputed firm including cutting and wastage etc and cutting holes in walis roofs or floor etc and making good to its original condition but excluding cost of lead jointing complete in all respect (HSR item No. 30.84.a&b) 100 mm dia pie

75 mm dia pipe

Providing and fixing in position best indian make (ordinary ) Lavatory suites consisting of Lavatory in vitreous chinaware size as given below ( to the approval of engineer-in-charge)including china plug for tap hole where necessary ; R.S or CI brackets for building into wall including painting; 32mm C.P brass waste with C.P brass chain and rubber plug; 15mm C.P brass screw down pillar tap with jamnuts or couplings best design ( as approved by the Engineer –in-charge ) All fittings best Indian make and ; to the approval of the Engineer-in-charge All brass work chromium plated and complete in all respect including cutting and making good the walls floors and painting of fitting etc. white size 450mmx300mm with one No. tap complete in all respect ( HSR item No. 30.41-(i)

Providing and fixing in position best Indian make Indian type water closet suit consisting of with ala accessory complete in all respect HSR item No. 30.1 a-i)

Dismentling white or colored glazed tile HSR item No. 8.38

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching (HSR item No.14.92b)

Providing and Labour for laying jointing fixing and testing G.I/PVC/W.I pipe lines and specials tees bends sockets elbows etc inside building and testing etc complete including cutting threading complete in all respect (HSR item No. 28.18(b)i & ii, (15mm dia pipe)

20mm dia pipe

Supply extra for fixing & jointing Union coupling in G.I. and W.I. pipe line (HSR item No.28.21

Dismantling disjointing removal and carriage of store GI pipe (HSR item No. 28.48

20mm dia pipe

Providing and fixing in position 15mm i/d C.P brass bibcocks of best quality ( as required by the Engineer-in-charge ) complete in all respect (HSR item No. 30.75a Bib cock long body

Bib cock

Providing and fixing in position C.P. brass stop cocks ( as approved by the Engineer-in-charge) (a) 15mm stop cock (i) concealed stop cock with flange complete in all respect (HSR item No. 30.76.(b)(ii)

Providing and fixing 0.50MM thick aluminum sheet i/c cost of necessary screw etc complete in respect HSR item No. 17.87

The Jui Vikas Coop LC Society Ltd.