REPAIR/ REPLACEMENT OF TILING, PLUMBING, SANITARY AND PERIODICAL AND THREE B/R AND E/M NATURE WORKS FOR E/M INSTALLATION UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Dismantaling of fencing post/strut of any description (wood/steel or RCC) including taking out embedded portion in concrete and making good to disturbed surface, complete all as specified and as directed. by Engr-in-Charge.

Ditto all as per description of item No 34 above but in ventilators

Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface all as specified & directed.

PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation, surface channels and drains and other similar work complete all as specified.

M&L for petty repair to steel rolling shutter system of any size and description including repairing of ball bearing, top cover, anchoring rod,hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing etc and making the shutter complete serviceable all as per existing patter all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

M&L Chain link fencing, plain mild steel galvanised wire 4mm dia galvanising steel wire considering min weight 2.95kg per sqm mesh size 50x50mm size or type complete all as specified and as directed.

S&F mild steel screw bolts 10mm dia (machinemade) with hexgonal or sqare heads at one end and screwed the other,or scrwed both ends , each screwed end to be fitted with washers and one hexagonal or squre nut n.exc 5 cm long.complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles complete all as specified and as directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire fencing/chain link fencing etc flat iron fillets (for securing chain link fencing etc) including all necessary drilling, bolting or reveting, welding etc and embeding in concrete and securing etc. and similar works conforming to Fe- 410-0 or Fe-310-0. All as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and as directed.

M & L for sand cushion, filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Dismantling of chain link fencing with mesh, any type complete all as specified and as directed.

M&L for chequered Cement concrete tiles with grey cement and pigment of size 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.

M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles complete all as specified and as directed.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water all as specified.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even without using extra cement with WPC complete all as specified and as directed. (WPC shall be measured and paid separately)

Integral waterproofing compound supplied only

M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified

M&L for prepration of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces all as specified

M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat putty and primer with alkali resistance priming paint complete all as specified.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of wall surfaces all as specified

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

S&F Rolled/tubular section mild steel work roof trusses (framed),trussed, purlins, rafters,crane gantries and heavy brackets framing (beams,tee,angle,channel or flat section) including MS plates, nutt bolts etc complete conforming to Fe 410-W(GdeE-250) quality B complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each

S&F framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging,rolling or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing (Fe 410-W Gde-E-250 quality-A) complete all as specified and as directed.

S&F 35mm thick IInd class hard wood plain framed factory made paneled shutters with (2 panel ) with lock rail and panel of 9mm BWP commercial ply of 12mm veneered particle bd with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically treated complete all as specified.

S&F glazed and skelton shutters factory made 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

S&F steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed and gauzed skelton shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWRR box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to failed shutters (Hold fasts 150 mm long of 12 mm x 3 mm made to shape-04 nos per window. (b) Handle of Z sec 20 mm x 25 mm, 100 mm long-1 Nos of leaf (c) MS tower bolt 150 mm long 02 Nos per leaf. (d) Z sec 20 mm x 25 mm , 100 long of hollow square 15 mm x 20 mm x 63 mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mm x 12 mm -02 Nos per lear (g Fabrication and fixing arrangement as per drawing No CEJZ/TD -06/07 Make/manufacture by Tee Pee Enterprises Amritsar, M/s Ram fabricators Pvt Ltd PunchKula. Note:Glass and painting shall be measured and paid separately under appropriate items.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed.

Dismantling structural steel works as in grills, doors ,gate

S&F mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, railings etc and similar works conforming to Fe-290 Gde-EW-165 including one shop coat of zinc chromate primer complete all as specified.

s but excluding framed truss etc complete all as specified and as directed.

S&F 250mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

Supply & Fixing 100mm size butt hinges medium weight cold rolled mild steel all as specified.

S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt all as specified.

S&F 150 mm mild steel pressed handles oval type, stove enamelled black all as specified.

S&F in repair ball bearing for rolling shutters complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads.complete all as specified and as directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks.

Preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M & L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment including taking down old stone slab complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before buld procurement and lots shall be got tested independtly by the GE.

M&L for complete removal of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper over a coat of birla white putty complete all as specified and as directed.

M&L for complete removal of old decorated surfaces of walls, washing rubbing down and stooping of painted surfaces and applying two coat of white wash on wall complete all as specified and as directed.

M&L forpreparation of old decorated surfaces of walls, washing rubbing down and stooping of painted surfaces and applying one coat of white wash on ceiling wall complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty wooden beads in square mtr n.exc 0.50 sqm each pane complete all as specified and as directed.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed. by Engr -in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed. by Engr -in-charge.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or colored cement to match over and incl 15mm thick bedding layer CM 1:6 complete all as specified.

M&L for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Ditto all as per item No-28 above, but area exc 1.5 Sqm and not exc 4 Sqm each.

M&L for 20 to 25 mm thick machine in cut kota stone slab flooring over and incl 15mm thick bedding layer CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror/granite finish polishing complete all as specified and as directed. by Engr-in-Charge.

S & F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

Complete removal of existing treatment on walls by scrapping washing rubbing down etc and applying two coat of cement base paint all as specified and as directed.

M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body fixed in repair, complete all as specified and as directed.

S&F 3mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter/partition complete all as specified and as directed.

S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Demolition of brick tiles single layer as in roof covering complete all as specified

S & F in repair floor spring door closer for aluminium door in any size brass and chromium plated body approved quality including carefully taking down the existing door and removing the damaged floor door closer and accessories etc and refixing the same door on the new door closer and making good the floor area and match the surface complete work all as specified and as directed. by Engr-in-Charge

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges.complete all as specified and as directed.

M&L 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including taking down old plaster, cleaning the roof top by water etc all as specified and as directed. by Engr in charge

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight complete all as specified and as directed.

S&F in repair squatting pan WC orissa pattern size 580 x 440 mm white with integral foor rest with P or S trap incl provn of lime concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specifed.

Taking up of or down steel tubing and connections 15mm bore including cleaning for refixing or removal to store

Taking up of or down steel tubing and connections 20mm bore including cleaning for refixing or removal to store

S&F in repair 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F in repair 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F 15mm angle stop valves, cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repair .

S&F in repair 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts,flushing cistern) incl seat cover and flushung pipe for pedestal pipe etc.

S & F in repair seat cover for water closet pedestal pattern all as specified

S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brakets fixed in repairs

S& in repair PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete fixed in repair

supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator ” complete all as specified and as directed.

S&F in repair Chromium plated jet for EWC 600mm long tube superior quality all as specified

S&F Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .

Supply and fixing in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position incl 20mm for ball valve PVC high pressure, with polythene float and fly nut complete all as specified

S & F in repair 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) Triple layer hosted and fixed in position incl 20mm for ball valve PVC high pressure, with polythene float and fly nut complete all as specified

S&F in repair 20mm for ball valve PVC high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed

S&F Pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe in repair

S&F brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union in repair.

S&F in repair Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specifed and as directed.

Supply and fixing in repair Bib tap chromium plated, cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed.

Demol

ition and braking up drain pipes AC/PVC pipe in upto 150mm size including all fittings complete all as specified and as directed.

S&F in repair for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe all as specified and as directed. by Engineer - in - Charge.

S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm with access door complete all as specified and as directed.

M&L for precast cement concrete type B-1 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, manholes cover slabs, chajjas, shelves and similar articles including necessary form work including demolition of old manhole cover all as specified and as directed.

Dismantling asbestos cement (Corrugated , semicorugated ) sheet as in roof coverings complete all as specified and as directed.

M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia. complete all as specified and as directed.

S&F steel rolling shutters 1 mm thick, with ball bearing and safety lever lock mild steel with 4 levers for rolling shutters, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete : push pull or manual type, including taking down old rolling shutters complete as specified