Tender ID

Himachal

Cancelled

Works

Civil Works

Addition Alteration to Atal institute of Medical Super Specialties Shimla-6 at Chamyana

Public Works Department

Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 21 Apr 2026Closed

Timeline

Published13 Apr 2026
Closed21 Apr 2026
Cancelled27 Apr 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 27 Apr 2026

Tender Value

Refer Docs

EMD Value

₹8,700

Closing Date

21 Apr 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Construction of toilets in O.T Surgery (A Block) for admitted patients,at 6th floor, Nursing staff of Hospital including WS/SI works etc)

Tender Information

Tender ID

2026_PWD_134178_3

Reference Number

SD-I-CTR-Tender-2026- 732 dt 10-04-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

Shimla

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredContractor registration IN APPROPRIATE CLASS (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect. (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹8,700

Important Dates

Last Activity

27 Apr 2026

Published

13 Apr 2026

Bid Opening

21 Apr 2026

Download Starts

13 Apr 2026

Download Ends

21 Apr 2026

Submission Starts

13 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Half brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.	1	Per Square meter	-	-
2	15mm Cement plaster in single coat on the fair/rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:6 (one Cement: six Sand).	1	Per Square Metre	-	-
3Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 600x600mm (six hundred into six hundred milimetre)
4	Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 and 1203 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) Cement Mortar 1:1:5:3(One cement:One point Five sand:Three graded stone aggregate 20mm(Twenty milimetre) nominal size).	1	Per Cubic Metre	-	-
5Providing and fixing Ceramic glazed wall tiles along with black strip covered both side highlighted design of size 300x600 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
6	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (i) For fixed portion (a)Powder coated aluminium (minimum thickness of powder coating 50 micron)	1	Per Kilogram	-	-
6.1	(b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fitting shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.	1	Per Kilo- gram	-	-
7	Providing and fixing 5.5mm thick HPL Sheet fixed in aluminium doors, windows shutters and partions frames with C.P. Brass/Stainless steel screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.	1	Per square metre	-	-
8Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.
9Providing and fixing Aluminium handel of coated in approved colour and shade in door and window including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200mm.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.58 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 5.42 MB

Work Item Documents

SBD430324.pdf

Tender Documents • 7.00 MB

BOQ_198427.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Half brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Per Square meter

15mm Cement plaster in single coat on the fair/rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:6 (one Cement: six Sand).

Per Square Metre

3Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 600x600mm (six hundred into six hundred milimetre)

Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 and 1203 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) Cement Mortar 1:1:5:3(One cement:One point Five sand:Three graded stone aggregate 20mm(Twenty milimetre) nominal size).

Per Cubic Metre

5Providing and fixing Ceramic glazed wall tiles along with black strip covered both side highlighted design of size 300x600 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (i) For fixed portion (a)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Per Kilogram

6.1

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fitting shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Per Kilo- gram

Providing and fixing 5.5mm thick HPL Sheet fixed in aluminium doors, windows shutters and partions frames with C.P. Brass/Stainless steel screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Per square metre

8Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.

9Providing and fixing Aluminium handel of coated in approved colour and shade in door and window including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200mm.