SPECIAL REPAIR TO KENNELS AND SHED AT BUILDING NOS P-302, 303, 304, 308, 309, 311, 252, 253 AND 171 AT AFDTS AT AF STN FARIDABAD UNDER GE (AF) FARIDABAD

Amount

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames but with shutters (Without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.

S&F hollow metal pressed Door with frame of Shutter of 1.mm x 46 mm & Frame 105x57 (1.2mm) single leaf shutter Wall Opening- 915mm X 2130mm, Honycomb Insulation, Frame & Shutter Material- GI, Frame & Shutter Finish- PWC (powder coated of approved colour by GE) including all necessary hardwares - (i)SS Ball Bearing Butt Hinges 101x 75 x 3mm in SS 304 Grade Geze make 3nos, (ii)Anchor Fastner CSK Type with GI Plating Size : 8 mm x 80 mm with PVC Sleve (For Door Frame Fixing in wall) Hilti(Required-10Nos/Door), (iii)SS Pull Push Handle (19x200mm ), (iv)Mortise Dead Lock with 70mm Cylinder Dorma make, (v) Door Closer Geze Make Up to 80kg Capesity, (vi)Vision Panel (600x1200) 6mm thick Thoughened Glass at top, (vii)Fibre Kick Plate Up to 600mm Height at bottom complete all as specified and directed.

S&F powder coated (colour as approved by GE) (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified etc. complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick including Solar control film 25 micron reflective type (gareware sun control or equivalent) with oil putty or beads fixed with screws in sequence exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F alluminium grills of make "Decogrille" model DG 104 surrounded by suitable alluminum box of 6.5mm thick( Fixing to be done for existing fixed aluminium doors,windows , AC holes back side glass portion with or with out taking off shutter from the frame and provn of locking arrengement to AC holes etc ) complete all as specified and directed.

S& F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingpvc flush door complete all as specified and directed.

Demolition of brick work or stone /boulder masonry, built in cement mortar and desposal of debris complete all as specified and directed.

M&L for Providing precast cement concrete in 1:2:4 B1 Type (using 20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L, Brick work with sub class 'B' straight or curved on plan exc 6m mean radies built in CM 1:6 complete all as specified and directed.

S&F butt hinge, medium weight ,cold rolled mild steel 100mm long complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) complete all as specified and directed.

S&F 150 mm long, extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150mm complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed.

Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer including surface preparation, complete all as specified and directed.

M&L for washing down and stopping old cement base painted wall surfaces including cornices, pillasters etc, preparing the surfaces and applying one coat of cement based paint complete all as specified and directed.

Preparing new surfaces of walls and applying two coats of oil bound distemper over a coat of primer over wall care putty complete all as specified and directed.

Complete removal of existing treatement of walls and applying two coats of oil bound distemper over a coat of primer over wall care putty complete all as specified and directed.

Preparing new surfaces of ceiling applying three coats of white wash complete all as specified and directed.

Preparing Old surfaces of ceiling applying one coat of white wash complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate as in plinth protection or path including necessary formwork complete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 as in backing coat to receive tile finish as in skirting and dados complete all as specified and directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams, stair case, landing, chhajas and similar suspended work complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings,cooking plateforms, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in Chajjas, fins, roof projection etc complete all as specified and directed.

M&L for Fair finished flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Fair finished Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with dips icl, anchoring and welding at places as directed quilety conforming to IS complete all as specified and directed.

S/F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Rebaring of reinforcement bar 8mm to 12mm dia upto depth of 200mm and complete all as specified and directed

M&L in repair for guniting work to RCC work in columns, beams, chajjas, Balconies, soffit of slabs, landings, RCC perapet wall and similar work by removing loose concrete, cleaning of surface with wire brush and applying one coat of epoxy paint to rusted Reinforcement and including S&F welded wire mesh fabric or wire not less than 95x95x3mm, adhesive plaster grade of concrete admixture non providing guniting pressure 2.00/2.50kgs/sqm with admixture part of cement and 3025 part of sand with a thickness of 50mm average and making the surface even and smooth including all necessary form work and applying 5mm cement plaster in CM 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

M&L for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even complete all as specified and directed. (WPC shall be measured and paid separately)

Supply only integral water proofing compound.

Material and labour for roof treatment on RCC roof slab complete as mentioned below, complete all as specified and directed :- (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iii) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (iv) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position complete all as specified and directed.

S & F 15mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore stop valves cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F 20mm bore stop valves cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Dismantling wrough iron or mild steel work of any description complete all as specified and directed.

M&L for structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covring. Doors to be prepare for hanging or sliding with and incl either hooks and hinge or steel hanging door fitings and similar works Confirming toFe-410-W Gde-E-250 and fixing complete all as specified and directed.

S & F Expanded steel metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed to wood or steel members work weight exceeding 4 Kg per Sq. M complete all as specified and directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plan, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Preparing new or old plastered surfaces of walls and applying two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint on roof boarder, drops, fins, chajja / roof facia, column etc, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, and applying two coats of polyurethane paint over a coat epoxy coating with zinc rich primer with spray/power coating painting machine complete all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/ dense soil complete all as specified and directed.

M & L 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade,with grey cement complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for Pre-cast cement concrete solid blocks as in kerb stones(factory made), exc.10 cm in width, in 1:2:4 type B1 using 20mm graded stone aggregate and setting in cement mortar 1:6 complete as specified and directed.

M&L for application of two coat of synthetic enamel paint over a coat of primer on with preparing new plastered /concrete surfaces as in kerb stone of foot path with different tints in alternate strips matching to existing etc after necessary preparation complete all as specified and directed.

Taking down carefully Copper/aluminium point wiring (light, fan,socket or Power) complete,(fittings Such as switches, ceiling roses, pendents, regulators sockets etc, to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully Copper/aluminium point wiring in 4.0 sq mm wire, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M & L for concealed point wiring with 1.5 sqmm (nominal area) PVC insulated (FR-LSH) unsheathed copper cable, multistrand conductor 1100 volts grade with colour coding and green cable used for earthing connection, controlled by one way switch drawn through and includig appropriate size of non metalic concealed PVC Conduit (not less than 20 mm dia) with all accessoriese Tee, junction box including 1.5 sqmm PVC rigid (FR-LSH) insulated un shealthed copper cable multistrand conductor 1100 volts grade for continuity eath wise connected to each point and terminated in to Sunken cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated/bakalite white dust proof sheet cover complete all as specified and directed.

One light point controlled by one way switch.

One ceiling fan/Exhaust fan point controlled by one way switch through Regulator.

All as per Item No 70.00 mentioned here-in- before but one three pin 5 Amps socket out let on the same board.

All as per item No 70.00 mentioned here-in- before but one three pin 5 Amps socket out let on independant board.

All as per item No 70.00 mentioned here-in- before but for socket outlet 3/5 Amps on independent board with cable size of 4.0 sqmm and earth continuity conductor cable of size 4 sqmm complete all as specified and directed.

S&F Piano switch in repairs, flush button,single pole,one way 5 Amp.

S&F piano switch,in repairs, flush button single pole one way 15 Amp.

S&F socket outlet, in repairs,flush type 2 in 1, 3/5 pin and 3 pin 5 Amp

S&F socket outlet, in repairs,flush type 2 in 1, 3/5 pin and 5/15 Amp

S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc.

S& F ceiling rose surface bakelite 3 terminals 65x50 mm two to three terminal complete all as specified and directed.

S&F LED luminaire 16W /Tube/LED fitting 6000K 2 feet long suitable for wall fitting with elegantly designed extruded al. bottom frame & MS powder coated white housing complete with separate electronic driver.& integrated electronic driver connector block etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 240 volts to 280 volts,isolation LED driver complete all as specified and directed.

S&F LED luminaire 30W LED street light 6000K suitable for building security lights with clamps nut bolts and 90cm GI tubing medium grade 32mm dia with elegantly designed extruded al. bottom frame & MS powder coated white housing complete with separate electronic driver.& integrated electronic driver connector etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD below 10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 240 voltst to 280 volts,isolation LED driver complete all as specified and directed.

S&F exhaust fan 300mm sweep heavy duty metal body with louvers including making necessary connection and fitting in existing hole in wall and making good disturbed surface complete all as specified andd directed

M & L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (Earth) pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0 mm by means of galvanised steel nolts nuts, check nuts and washer, as earthing lead as shown in electric plate No-3 of SSR Part-1 connected to earth test point all as specified or indicated including testing on completion and necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, 50mm thick precast RCC slab as pit cover casting in PCC 1:2:4 type B-1 with 8 mm dia deformed bars as reinforcement 15 cm C/C and suitable handle for 10 mm dia MS round bar including earth work, funnel, 20 mm dia medium grade watering pipe, 15 mm dia GI light grade earth lead protection pipe, CI frame and cover, wire copper lugs etc mesh, charcoal and common salt in alternate layer complete all as specified and directed. Note : GI pipe of extra length of main earthing lead beyond 7.5 mtr will be measured & paid seperately

Supplying, laying, jointing and testing cable XLPE insulated IS-7098(Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminium conductor for working voltage upto and including 1100 volts, cross sectional area of cable 95 sqmm, 3.5 core laid in trenches/fixed on pole/wall or passed through pipe complete all as specified and directed.

All as item No 84.00 above but 25 Sqmm 4 core

All as item No 84.00 above but 16 Sqmm 4 core

Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm apart complete all as specified and directed.

Removing of surplus excavated soil to distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed.

Supply of brick sub class 'B' laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and directed.

S&F boring of hole under road, pavement, hardstanding by trenchless technology using ultrasound technique and necessary machine incl HDPE pipe 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply and fixing sheet metal enclosures for double door triple pole and neutral enclosures 4 way MCCB DB suitable for one No MCCB TPN 63 Amp and outgoing MCB single pole SPN/SP complete with semi concealed type complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amp, 10 KA, B series completed all as specified and directed

Supply and fixing MCCB 415V,16KA, 4 pole, 40Amp fixed type complete all as specified and directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,23,324.00

M/S Satyam Associates