AGMC of Sub Station panels Internal Electrification work and associated system including Operation of DG sets Water pumps and Lifts installed at CSIR Complex CSIR Scientist Apartments CSIR Hq and Science Centre New Delhi

Amount

SCHEDULE: A: CSIR HQ AND SCIENCE CENTRE

Sub-Head: I :- Operation, Preventive and Routine Maintenance of Electrical Systems

Operation and Maintenance of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps and Lifts at CSIR Hq and CSIR Vigyan Kendra, New Delhi. The scope of work including the deployment of manpower is as per annexure -I

SCHEDULE: B: CSIR Complex and Guest House

Sub-Head: I : Operation, Preventive and Routine Maintenance of Electrical Systems

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including Distribution boards, LT panels, operation of various DG sets, substation, waterpumps, lifts and Comprehensive Maintenance of 300 KVAR capacitor bank at CSIR Complex, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

SCHEDULE: C: MBSA and IPU at NIScPAR

Sub-Head: I : Operation, Preventive and Routine Maintenance of Electrical Systems

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps, lifts and Comprehensive Maintenance of 100 KVAR capacitor bank at CSIR MBSA, New Delhi and IPU at NIScPARP, satsang Vihar, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

Sub-Head: II : Replacement of Electrical Components & Accessories

Replacement of Defective of following rating and breaking capacity and pole MCCB including supply with thermomagnetic release and terminal spreaders in existing cubicle panel board drilling connections etc as required.

100 A, 16 KA TPMCCB

125 A, 16KA TPMCCB

200 A, 25KA TPMCCB

125 A, 36 KA FPMCCB

200 A, 36 KA 4 pole MCCB

Replacement of defective 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker including supply suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Triple pole

Triple pole and neutral

Replacement of defective 63 amps rating, 240/415 volt "C" series, miniature circuit breaker including supplysuitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing & commissioning etc. as required.

Single pole and neutral

Triple pole and neutral

Replacement of defective Fan regulator on existing switch box cover including supply and connections etc complete in all respect. Switch type fan regulator of "Anchor" / "Rider make 100 Watt 230 volts

SITC of hand dryer of 1200 Watt, 50 Hz, 230 Volts, <30 dB, stainless steel body with connections, acessories including supply etc complete as required. Make: Kopal

Replacement of defective heavy duty exhaust fan of 300 mm sweep, single phase, 900/1400 RPM complete with all accessories including supply, connections etc complete in all respect.

Replacement of defective heavy duty exhaust fan of 450 mm sweep, single phase, 900/1400 RPM complete with all accessories including supply, connections etc complete in all respect.

Replacement of defective starter including supplying etc complete in all respect.

Replacement of defective capacitor 2.5 Mfd, 230 V A.C. including supply in the existing fitting / fans etc complete in all respect.

Replacement of defective Plug Top including supply, connections etc. as required.

(a) 3 pin Top 6 Amp

(b) 3 pin Top 16 Amp

Replacement of defective flexible 3 core 2.5 sq.mm. copper PVC insulated unarmoured round cable 1.1 KV grade including supply,connection etc as required.

Replacement of defective 9 watt LED bulbs , 230V, AC, including supply etc as req.

Replacement of defective Remote Bell including supply and connection etc as req. "Cona" Make

Replacement of defective electronic ballast Choke with connector of 36/40 W FT including supply etc complete as required.

Replacement of defective Ceiling fan with 1200 mm sweep blades, high speed including supply making connections and accessories etc. complete as required.

Replacement of defective wall mounting fan with regulator of 400 mm sweep with oscilation on wall / wood with the help of rawl plug and screws including supply and connections etc complete in all respect.

Replacement of defective of Recess mounted round LED downlighter of 5W (for lift ) or above with all required drivers, hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc. complete in all respect. Make:- Wipro Cat No.: LD06-171-XX-65-RF / Philips cat ref: DN296B LED15S-6500 PSU or equivalent as per approved list of makes.

Supplying, installation, testing and commissioning of Bright Line 20 Watt LED Batten ( Cool Day Light ) 240 V, Fitting (Philips) OR Garnet 22W LED Batten (Wipro) lighting fitting on surface / recesses complete with all acessories i.e. Lamp / driver etc complete in all respect.

Replacement of defective hylum sheet 3 mm thick including supply in the existing switch / socket MS box etc complete in all respect.

Supplying and fixing of 6 module plastic box horizantal with modular plate and cover on surface or in recess, including providing and fixing 1 number 16 amp modular switch, 2 number 16 amp modular Socket and 1 number blank plate including connections etc as required.

Replacement of 32 A, 240V (white) D.P. Main Switch Operating with Key Tag 2 Make - ROMA including supply and connection etc complete as required

Supplying and fixing 8 module plastic box horizantal with modular plate and cover on surface or in recess, including providing and fixing 1 number 6 amp modular switch, 3 number 6 amp modular Socket and 1 number blank plate including connections etc as required.

Providing and fixing following size of PVC casing and caping on surface as required.

(a) 25mm x16mm

(b) 38mm x16mm

Illumination of Building on rental Basis for foundation day with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR HQ, Rafi Marg, New Delhi. (a) Providing and fixing weather proof required number of coloured LED flood lights of 200 watts or above in three colours i.e, orange/amber, white and green with a building length of 45 meter horizontally and 12 meter vertically. (b) Providing and fixing weather proof LED strip lighting in three colours i.e, orange/amber, white and green on terrace with a parapet length of 25 mts and in vertical lines of 15 meters drop at every interval of 0.25 m. (c) Providing and fixing weather proof LED strip lighting on terrace with a parapet length of 60 mts. (d) Illuminating the porch area of the building in vertical lines of 5.0 m dropat every interval of 0.25 mts. (e) Illuminating the Boundary wall of 60 mts length and 2 nos. gates including security room area. (f) Illumination of 25 nos. trees and plants, fountain area in lawn (g) Illumination of 13 numbers round pillars of dia 0.5 mtr, height 3.5 mtr weather proof LED lighting in three colours i.e, orange/amber, white and green as per the instruction of Engineer-In- charge. (CSIR-HQ)

Illumination of Building on rental Basis for foundation day with suitable LED strip lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR Complex, Pusa, New Delhi. (a) Providing and fixing weather proof LED strip (fixed) lighting on terrace with a parapet length of 57.5 meter (terrace) and in vertical lines of 28 Mtr drop at every interval of 0.25 Mtr. (b)Providing and fixing weather proof LED strip (fixed) lighting on terrace and connecting corridor at first floor from main building to annexe building with a parapet length of 33.5 Mtr (terrace); 25 meter (connecting corridor) and in vertical lines of 10 meter and 3 Mtr drop respectively at every interval of 0.25 Mtr (c)Providing and fixing weather proof LED strip (fixed) lighting on terrace with a parapet length of 100 Mtr (Guest house terrace) and in vertical lines of 10 Mtr drop at every interval of 0.25 Mtr at every interval of 0.25 Mtr for 50 meter length including plantations near guest house only (d) Illuminating of 2 nos. gates including security room area as per the instruction of Engineer-In- charge. (CSIR-CX)

Replacement of defective Post top LED luminaire of 35 W or above Light Fitting on the existing 50 mm dia GI poles with the help of GI reducer/GI nipple with all required drivers including supply, fixing and connection etc complete in all respect. Make:- Wipro Cat No.: LP07-431-XXX-65-CL/ Philips or equivalent as per approved list of makes.

Supplying, installation, testing and commissioning of 100 Watt Cool Day White Square LED Flood Light for existing GI pole / Sign Board, IP: 65, 230 V, 50 Hz etc complete as required.

Replacement of defective of Recess LED of 30W or above, 2'x2' luminaire having CRCA housing with all required drivers, hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc. complete in all respect. Make :- Philips cat ref: RC380B LED36S- 6500 G4 L60 W60 PSU or equivalent as per approved list of makes.

Replacement of defective Recess mounted LED of 30W or above, 4'x1' luminaire with all required drivers hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc.complete in all respect, Make:- Philips cat ref: RC375B Recessed coreline panel 33 W (1x4) or equivalent as per approved list of makes.

Replacement of defective of Recess mounted round LED downlighter of 12W or above with all required drivers, hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc. complete in all respect. Make:- Philips cat ref: DN296B LED15S-6500 PSU or equivalent as per approved list of makes.

Replacement of defective Surface mounted round LED downlighter in aluminum die cast body of 12 W or above, with all required drivers including supply, fixing and connection etc complete in all respect. Make:- Philips cat ref: SM250C LED 12S-6500 PSU WH or equivalent as per approved list of makes.

Replacement of wireless dimmable Recess mounted Direct/ Indirect LED 2'x2' luminaire in the range of 34W with all required drivers, hook, chain other related accessories including supply, repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting complete in all respect, with wireless controller Wipro Cat No.: LM38-461-XXX-65-XX with Dimming/ Philips: equivant

Replacement of LED Street Light Luminaire of 35 W or above & the luminaire shall be with all required drivers, hook, chain other related accessories including supply, repair & alternation in the fixation of LED fittings and dismanteling of existing fitting complete in all respect, etc. complete as required. Make: Wipro Cat No: LR13-501-XXX-57/65-XX/ Philips or equivalent of approved makes

Supplying and fixing of LED strip in required colour including driver, adapter, connections etc complete as required. Make : Philips

Supplying and laying of PVC insulated, 3 core, 4 sq mm copper submersible flat cable of 1.1 kv grade in borewell including jointing of cable with double side plasic release film rubber strip, waterproof, shockproof upto 5 kv grade, etc. complete as required.

Supplying, installation, testing and commissioning of 100 Watt tricolour LED Flood Light for existing GI pole / Sign Board, IP: 65, 230 V, 50 Hz etc complete as required.

Replacement of defective following LED driver with connector of LED Light fitting including supply etc complete as required.

LED driver, V(out): 30-36 VDC, I(out): 0.900 A, P(out): 33 W for 4'x1' luminaire

LED driver, V(out): 53 VDC, I(out): 0.720 A, P(out): 40 W for 2'x2' luminaire

LED driver, V(out): 30-40 VDC, I(out): 0.900 A, P(out): 32 W for 2'x2' luminaire

LED driver, V(out): 145 VDC, I(out): 0.230 A, P(out): 36 W for 2'x2' luminaire

LED driver, V(out): 40 VDC, I(out): 0.250 A, P(out): 7 W for bolard light luminaire

LED driver, V(out): 30-38 VDC, I(out): 0.860 A, P(out): 25-35 W for Street light luminaire

LED driver, V(out): 32-54 VDC, I(out): 1.4 A, P(out): 75 W for Street light luminaire

LED driver, V(out): 107-214 VDC, I(out): 0.700 A, P(out): 150 W for Flood light luminaire

LED driver, V(out): 60-74 VDC, I(out): 0.950 A, P(out): 75 W for Flood light luminaire

Replacement of defective LED Indicator with different colours 230 Volts, 50 Hz with connections, acessories including supply etc complete as required.

Replacement of defective door locks for LT Panels/DB including supply etc complete as required.

Supplying, instalaltion, testing and commissioning of 9 nos. changable brass vertical adjustable fountain nozzles (3.2 -3.8 mm) for 2 mtr diameter central water body cascade, mounted on 304 grade SS circular rings with all required plumbing in heavy duty GI pipes /CPVC, fittings, making connections of GI distribution branch with GI / CPVC main of 25 to 50 mm NB size by providing and fixing tee including cutting and threading the pipe etc. Complete as required.

Supplying and Fixing of suitable size powder coated MS 16 SWG electrical bus bar chamber enclosure including Al. Bus bar of 250 Amp, 4 way current carrying capacity for incoming of one number and three number outgoing cables of three phase supply to pump house including connections etc., as required

Arrangent for Bucholz relay connection to HT panel including supply of required relay, timer, power pack, hooter, tripping coil and control wiring connections etc., for proper functioning of bucholz relay, complete as required.

Replacement of defective digital/analog ammeter upto a range 0-800 A including supply in existing LT Panel/ servostabilizer including testing and commissioning etc complete in all respect (96x96 mm) L& T make or equivalent

Replacement of defective digital/ analog voltmeter upro a range 0-600 V including supply in existing LT Panel/ servostabilizer including testing and commissioning etc complete in all respect (96x96 mm) L& T make or equivalent

Supplying and fixing of 20 mm or suitable size Die Cast panel door lock socket key male threaded round shape with key set etc., as required.

Supplying and fixing of 90 mm or suitable size concealed panel door hinges etc., complete as required

Supplying and fixing of suitable size mild steel DG set canopy slam lock/door lock with key set etc., complete as required

Supplying and fixing of Die Cast suitable size DG set canopy door hinges left/right side etc., complete as required.

S/I/T/C L&T make D-O-L starter, Relay range 11-18 ampere, three phase, 440 V, 50 Hz including incoming and outgoing cable connections etc complete as required

Replacement of defective 25 litre vertical water geyser 4/5 star including supplying 25 L Vertical water geyser, 230 V, 50 Hz etc complete in all respect.

Sub-Head - III Internal Electrification Work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Rewiring for Light point / Fan point Exhaust fan point / Call bell point with 1.5 sq. mm. FR PVC insulated, copper conductor cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in the existing surface / recessed steel / PVC conduit including dismantling as required.

Group A

Group c

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x 2.5 sqmm + 1 x 2.5 sq. mm earth wire

2x 4 sqmm + 1 x 4 sq. mm earth wire

2x 6 sqmm + 1 x 6 sq. mm earth wire

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface / recessed PVC / Steel conduit / PVC casing and capping as required.

2 x1.5 sq. mm

3 x1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

2 x 6 sq.mm

3 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc. as required.

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

2 way 5/6 amp switch

Bell push

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connections, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5pin 15 /16 amps modular socket outlet and 15 / 16 amps modular switch, connections, painting etc. as required.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing metal box of following sizes (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required

100mm x 100mm x 60mm deep

150mm x 75mm x 60 mm deep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of aa sizes.

Replacement of defective DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB including supply complete with connections, testing and commissioning etc. as required.

Providing and fixing of 25 mm x 5 mm GI Earth strip on surface or in-recess for connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box including connections etc. As required

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and installing following size of perforated painted with powder coating M.S. Cable trays with perforation not morethan 17.5 %, in convenient sections, joined with connector, suspended from the ceiling with M.S. Suspenders including bolts and nuts, painting suspenders etc. as required (a) 450 mm width x 50 mm depth x 2 mm thickness

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.( 2 neutral earthing of Transformer. )

Supplying and fixing 4 way (4 + 12), Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Sub - Head IV :- Repairing, Servicing and Rewinding of Fans, Pumps and Motors.

Repairing and over hauling of Ceiling fans up to 56" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and over hauling of Exhaust Fan up to 18" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and overhauling of Wall Mounting Fan up to 400 mm sweep including all materials, disconnecting and reinstallation of the same complete as required.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing, over hauling & rewinding of 1 HP Submersible (Sewage) Pump including reinstallation, lowering the same after replacement of gun metal bushes,bearing,waterseal, bearing, plate impeller,sleeves etc. complete in all respect.

Repairing and over hauling of 1 Phase ,1 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 7.5 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 15 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper

Replacement of Bearings

Replacement of Impeller.

Repairing of 1 HP, 1 phase, 50 Hz Submersible pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 1 HP , 1 Phase 50 Hz Submersible motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 1 HP ,1 phase ,50 HZ Submersible Pump-Motor in exiting bore well etc. complete in all respect.

Repairing of 5 HP, 25 stage, 3 Phase Submersible Pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 5 HP ,25 stage, 3 Phase Submersible Motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 5 HP 25 stage ,3 phase Submersible Pump-Motor in exiting bore well etc. complete in all respec.

Repairing of 7.5 HP, 3 Phase Submersible Pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 7.5 HP, 3 Phase Submersible Motor with water proofing copper wire of apporprite size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 7.5 HP, 3 phase Submersible Pump-Motor in exiting bore well etc. complete in all respect.

Rewinding, repairing and over hauling of 7.5 HP Openwell Submercible Pump- Motor including lifting, lowering, replacement of water seal, rusted nut & bolts, bearing etc. after disconnecting and reinstallation of the same complete in all respect. (NOTE :- Pump installed at underground water tank)

Repairing of Heat Convectors including replacement of all necessary spares to make them operational including following spares.

Heating Element

Blower Motor

Thermostate

Repairing of Geysers of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element 2 KW

Thermostat

Assemebly

Repairing of food Hot Case (painmarie) of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element

Thermostate

Repairing of Fly Insects Killer instuments all make including replacement of necessary spares and following spares to make them operational.

Ultra Voilet Tube 20 W

High Voltage Transformer

Repairing and over hauling of Exhaust Fan 30" sweep, 3-phase including rewinding of motor with enamelled copper wire, replacement of bearings / bush, repairing of shaft, disconnecting and re-installation of the same complete in all respect (Hq)

Repairing and over hauling of 1 Phase, 2 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect. (Hq)

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller

Supplying and fixing of Float switch for sewage pump of KSB make 1 HP including all necessary accessories, connection, testing and commissioning etc. complete as required.

AMC for Grundfos make pressure Booster system including booster pump with motor, control panel, Pressure Gauge, Pressure Switch, Pressure Tank etc complete as required (Services from OEM / authorized service centre only)

Repairing and over hauling of 3 Phase, 2 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller

Sub - Head V :- Buy Back Item "As is where is basis".

Salvage value of dismantled / old Wall Mounting fan 400 mm sweep "As is where is basis"

Salvage value of dismantled / old Pedestal fan 400 mm sweep "As is where is basis"

Salvage value of dismantled / old Exhaust fan upto 450 mm sweep "As is where is basis"

Salvage value of dismantled / old 150 Watt LED Flood Light "As is where is basis"

Salvage value of dismantled / old T5 Light fitting 1x28 watt / 2x 28 Watt "As is where is basis"

Salvage value of dismantled / old flouresent tube light fitting 1x 36 Watt "As is where is basis"

Salvage value of dismantled / old flouresent tube light fitting 2x 36 Watt "As is where is basis"

Salvage value of dismantled / old PL light fitting 2x 36 Watt "As is where is basis"

Salvage value of dismantled / old PL down light fitting 2x18 Watt "As is where is basis"

Salvage value of dismantled / old PL down light fitting 1x9 Watt "As is where is basis"

Salvage value of dismantled / old halogen light fitting 12 Watt "As is where is basis"

Salvage value of dismantled / old Geyser 25 Litre "As is where is basis"

Salvage value of dismantled / old Geyser 15 Litre "As is where is basis"

Salvage value of dismantled / old Ceiling Fan 1200 mm sweep "As is where is basis"

Salvage value of dismantled / old 100 Watt LED Flood Light "As is where is basis"

Salvage value of dismantled / old Recess/ Surface light 12 W "As is where is basis"

Salvage value of dismantled / old Recess light 15 W "As is where is basis"

Salvage value of dismantled / old down light 15 W "As is where is basis"

Salvage value of dismantled / old 1000 Watt Halozen light fiting "As is where is basis"

Salvage value of dismantled / old bettery 12 V 65 Ah "As is where is basis"

Salvage value of dismantled / old Heat convectors "As is where is basis"

Salvage value of dismantled / old street light 48 W "As is where is basis"

Salvage value of dismantled / old Single fitting 20 W Light "As is where is basis"

Salvage value of dismantled / old Double fitting 22 W Light "As is where is basis"

Salvage value of dismantled / old 7.5 Hp motor "As is where is basis"

Salvage value of dismantled / old 7.5 HP Sumersible pump "As is where is basis"

Salvage value of dismantled / old Hand Dryer "As is where is basis"

Salvage value of dismantled / old 12 Volt, 180 AH lead acid battery "As is where is basis"

S.K.ENGINEERS