Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC | ₹5.7 L | L1 | Accepted-AOC Rate quoted by the firm is found lowest |
| 2 | L2₹3.5 L−₹2.2 L (38.6%)Accepted-AOC | ₹3.5 L−₹2.2 L (38.6%) | L2 | Accepted-AOC Rate quoted by the firm is found lowest |
| 3 | L3₹2.6 L−₹3.0 L (53.5%)Accepted-AOC | ₹2.6 L−₹3.0 L (53.5%) | L3 | Accepted-AOC Rate quoted by the firm is found lowest |
| 4 | L4₹3.8 L−₹1.8 L (32.4%)Accepted-AOC | ₹3.8 L−₹1.8 L (32.4%) | L4 | Accepted-AOC Rate quoted by the firm is found lowest |
| 5 | L6₹3.4 L−₹2.3 L (40.1%)Accepted-AOC HOUSE NO 7 HELLO KIDS SCHOOL LANE BUTA NAGAR EXTN PALOURA JAMMU PALOURA PALOURA JAMMU JAMMU KASHMIR 181121 | JAMMU | JAMMU AND KASHMIR | 181121 | ₹3.4 L−₹2.3 L (40.1%) | L6 | Accepted-AOC Rate quoted by the firm is found lowest |
Tender Value
₹1.8 Cr
EMD Value
₹3.5 L
Closing Date
29 Aug 2019, 6:00 pmClosed
COL PRAMOD KUMAR
55 ENGINEER REGIMENT C/O 56 APO PIN 914055
SUPPLY OF HARDWARE ITEMS AND CONSTR MTRL FOR MTA (JOB NO 6004 6014 6025)
2019_ARMY_275672_1
6400/QTN/17/OPW
Open Tender
Miscellaneous Goods
Item Rate
60 days
55 ENGINEER REGIMENT C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹3.5 L
21 Dec 2020
20 Aug 2019
30 Aug 2019
20 Aug 2019
29 Aug 2019
24 Aug 2019
CGI Sheet 4200mm x 910mm x 22 Gauge with zinc coating of 120 gms/sqm (on both sides) conforming to IS 277-1977 Make- SAIL/TATA/JSW
CGI Sheet 3600mm x 910mm x 22 Gauge with zinc coating of 120 gms/sqm (on both sides) conforming to IS 277-1977 Make- SAIL/TATA/JSW
CGI Sheet 3000mm x 910mm x 22 Gauge with zinc coating of 120 gms/sqm (on both sides) conforming to IS 277-1977 Make- SAIL/TATA/JSW
CGI Sheet 2400mm x 910mm x 22 Gauge with zinc coating of 120 gms/sqm (on both sides) conforming to IS 277-1977 Make- SAIL/TATA/JSW
PGI Sheet 3000mm x 910mm x 22 Gauge with zinc coating of 120 gms/sqm (on both sides) conforming to IS 277-1977 Make- SAIL/TATA/JSW
MS pipe 50mm dia IS-1239 (PART 1) -1979 Make – JINDAL/TATA
MS pipe 40mm dia IS-1239 (PART 1) -1979 Make – JINDAL/TATA
Galvanized iron two strands barbed wire hot rolled of 2.5mm dia line wire and 2.00mm dia wire for barbs. Weight shall be approximately 120gm per meter with the tolerance of + 2%. The distance between two barbs shall be 75mm plus or minus 12mm. GI barbed wire be conforming to IS-278/1978. The galvanized barbed wire shall be manufactured from hot dipped galvanized mild steel wire confirming to IS280/1972P
Readymix synthetic enamel paint drying colour White (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Black (04 ltr packing)Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Sky Blue (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Blue (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Dark Brown (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Brown (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Green (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour OG (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Red Post Office (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Yellow (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel paint drying colour Sand (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Readymix synthetic enamel Paint Red Oxide (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Zinc chromate metal primer yellow shade (04 ltr packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Zinc chromate metal primer Red oxide shade. (04 ltr packing) Make-BERGER/ASIAN/NEROLAC/SHALIMAR
Wooden Primer White (04 ltr Packing) Make- BERGER/ASIAN/NEROLAC/SHALIMAR
Oil bound distemper (04 ltr Packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Dry distemper Make -BERGER/ASIAN/NEROLAC/SHALIMAR
Thinner (04 Ltr Packing) Make- BERGER/ASIAN/NEROLAC/SHALIMAR
Turpentine oil (05 Ltr Packing) Make- BERGER/ASIAN/NEROLAC/SHALIMAR
Touch wood (01 Ltr Packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
Varnish (01 Ltr Packing) Make - BERGER/ASIAN/NEROLAC/SHALIMAR
GI binding wire 22 SWG confirming to IS 2062/1991
Steel screw ½ “ (100 Nos) ISI Marked
Steel Screw 1 “ (100 Nos) ISI Marked
Steel Screw 1 ½ “ (100 Nos) ISI Marked
Steel Screw 2 “ (100 Nos) ISI Marked
Steel Screw full thread ½ “ (100 Nos) (self taping screw) ISI Marked
Steel Screw full thread 1“ (100 Nos) (self taping screw) ISI Marked
Steel Screw full thread 1 ½“ (100 Nos) (self taping screw) ISI Marked
Steel Screw full thread 2“ (100 Nos) (self taping screw) ISI Marked
Tarfelt BH (self finished) water proofing felt length 20m width 1 m and weight 46 Kgs as per IS 1322-62 Make-Makfelt ISI marked
Wire mesh 3’ wide 0.63mm aperture Make – Power
MS plate 300x300x3 mm thick with 01 Nos handles of 8 mm dia MS bar Make-TATA/SAIL/JSW
Nut and bolt 25mmx75mm
Flat Iron 40x6mm Make-TATA/SAIL/JSW
Galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia Make : Power as per IS
STEEL ROOFING TROUGH (SRT) 2440MM. Steel Roofing Trough (SRT) 2440mm long made out of 14 gauge thick, @ 36 kgs each =/- 5% tolerance, hot rolled carbon steel sheet conforming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty) complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. The SRT must match without creating any gap while joining together. The SRT shall be given a coat of red-oxide primer after preparation of surface. For every 20 SRTs two box spanners suitable as per the size of bolts and spike 10mm dia 250mm long will be provided. Hole in the SRT shall be made by punching, without distortion of hole .The finished hole diameter shall not be more than 2mm over the diameter of the screw passing through it. Make-TATA/SAIL
STEEL ROOFING TROUGH (SRT) 3000MM. Steel Roofing Trough (SRT) 3000mm long made out of 14 gauge thick, @ 44 Kgs each =/- 5% tolerance, hot rolled carbon steel sheet conforming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty) complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. The SRT must match without creating any gap while joining together. The SRT shall be given a coat of red-oxide primer after preparation of surface. For every 20 SRTs two box spanners suitable as per the size of bolts and spike 10mm dia 250mm long will be provided. Hole in the SRT shall be made by punching, without distortion of hole. The finished hole diameter shall not be more than 2mm over the diameter of the screw passing through it. Make-TATA/SAIL
GYAN Basket made of 8mm steel TOR (Make - SAIL TMT/TATA TMT/JINDAL TMT/ VIZAG TMT/KAMDENU TMT) as per IS 2062/1999 with specification of weight Kg/m being not less than 0.395 Kg. The basket will be of size as under :- (a) Height – 75 cm. (b) Width – 60 cm. (c) Length – 90 cm. The mesh will be of a dimension 15 cm x 15 cm with all four corners of basket hinged with rings made of 10mm TOR, dia 1.25 inch with a total of 20 Rings (4 Nos each corner). Each basket to have 04 Nos of clamps. Clamp should consist of two Nos of MS plate of size (LxBxC) 100mm x 40mmx4mm with 2 Nos of holes as mentioned in drawing, 2 Nos of 50mmx8mm full threading nut and bolts as shown in the drawing be provided with the each clamp alongwith the washers with each nut bolt.
Cement of 43 grade OPC conforming to IS 8112/1989 in sealed bags each weighing 50 Kg. The date of manufacture of cement should not be more than one month prior to the date of delivery Make-ACC/Ambhuja/Birla/J K Laxmi/Sree Laxmi
Aggregate 10-20mm graded confirming to IS 383-1970
Clean coarse river sand conforming to IS 2116-1980
PCC Bricks of size 230mm x115mm x75mm with min str of M 15 and confirming to IS-456 of 1978
TMT Bar 8mm Make- Tata Tiscon/Kamdhenu/Jindal
TMT Bar 10mm Make- Tata Tiscon/Kamdhenu/Jindal
TMT Bar 12mm Make- Tata Tiscon/Kamdhenu/Jindal
Non skid ceramic colour floor tiles of size 600 x 600mm, 7 to 8mm thick 1 st quality heavy duty abrasion resistance conforming to IS 15622 as per sample approved Make-Johnson/Kajaria/Somany
Interlocking tiles 80 mm as per IS specification.
Cross laminated UV stabalised LDPE sheet conforming to IS 14611/1998, 150 GSM along with suitable fixing arrangement colour- Black/OG Make – SILPAULIN
HDPE sand bags barrel type double stitched at one end std quality double colour brown and size 840mm x 360mm nylon with suitable tying cord as per IS 14252/1995. Weight should not less than 85 gms as per sample approved by this Regiment.
Acrylic sheet 4'x3'x4mm
SWR 6 mm Make- Mahadev/USHA Martin/ASAHI
SWR 12mm Make- Mahadev/USHA Martin/ASAHI
SWR 16mm Make- Mahadev/USHA Martin/ASAHI
Bulldog Grip 6mm heavy duty ISI marked Make- Mahadev/USHA Martin/ASAHI
Bulldog Grip 12mm heavy duty ISI marked Make- Mahadev/USHA Martin/ASAHI
Bulldog Grip 16mm heavy duty ISI marked Make- Mahadev/USHA Martin/ASAHI
GI Pipe 150mm Make Jindal/Tata
GI Pipe 80mm Make Jindal/Tata
GI Pipe 100mm Make Jindal/Tata
Welding Rod of size 3.15x354mm weight not less than 2.5 Kg per pkt.
Nylon rope 10mm
Nylon rope 12mm
Nylon rope 18mm
Hose Pipe 1/2’’
Hose Pipe 3/4’’
Hand Gloves leather as per sample approved
Common Salt
Charcoal
Glyphosate 41% SL (PA Salt) Herbicides Make : Round up
Water Tank Vertical Rotationally Moulded double layer of 200 ltr capacity conforming to IS: 12701/96 including amendment with moulded closed lid including clamp and locking arrangements. Make: Sintex/Star. (ISI Marked).
Water Tank Vertical Rotationally Moulded double layer of 500 ltr capacity conforming to IS: 12701/96 including amendment with moulded closed lid including clamp and locking arrangements. Make: Sintex/Star. (ISI Marked).
Water Tank Vertical Rotationally Moulded double layer of 1000 ltr capacity conforming to IS: 12701/96 including amendment with moulded closed lid including clamp and locking arrangements. Make: Sintex/Star. (ISI Marked).
Gate Valve brass 25mm dia Make - BIR/LEADER/KIRLOSKAR
Gate Valve brass 40mm dia Make - BIR/LEADER/KIRLOSKAR
Gate Valve brass 50mm dia Make - BIR/LEADER/KIRLOSKAR
Gate Valve brass 80mm dia Make - BIR/LEADER/KIRLOSKAR
GI Union 15mm dia as per IS 1879 ISI marked
GI Union 20mm dia as per IS 1879 ISI marked
GI Union 25mm dia as per IS 1879 ISI marked
GI Union 40mm dia as per IS 1879 ISI marked
GI Union 50mm dia as per IS 1879 ISI marked
GI Socket 15mm dia as per IS 1879 ISI marked
GI Socket 20mm dia as per IS 1879 ISI marked
GI Socket 25mm dia as per IS 1879 ISI marked
GI Socket 40mm dia as per IS 1879 ISI marked
GI Socket 50mm dia as per IS 1879 ISI marked
GI Bend 15mm dia as per IS 1879 ISI marked
GI Bend 20mm dia as per IS 1879 ISI marked
GI Bend 25mm dia as per IS 1879 ISI marked
GI Bend 40mm dia as per IS 1879 ISI marked
GI Bend 50mm dia as per IS 1879 ISI marked
GI Elbow 15mm dia as per IS 1879 ISI marked
GI Elbow 20mm dia as per IS 1879 ISI marked
GI Elbow 25mm dia as per IS 1879 ISI marked
GI Elbow 40mm dia as per IS 1879 ISI marked
GI Tee 15mm dia as per IS 1879 ISI marked
GI Tee 20mm dia as per IS 1879 ISI marked
GI Tee 25mm dia as per IS 1879 ISI marked
GI Tee 40mm dia as per IS 1879 ISI marked
GI Tee 50mm dia as per IS 1879 ISI marked
Ball Valve Brass 15mm Make - BIR/LEADER/YASPAL
Ball Valve Brass 20mm Make - BIR/LEADER/YASPAL
Ball Valve Brass 25mm Make - BIR/LEADER/YASPAL
Ball Valve Brass 40mm Make - BIR/LEADER/YASPAL
Ball Valve Brass 50mm Make - BIR/LEADER/YASPAL
M Seal in 100 Gms Pkt
Adjustable Wrench 12'' Make- HIRA/TAPARIA
Adjustable Wrench 18'' Make- HIRA/TAPARIA
Hexa Frame Make- HIRA/TAPARIA
Hexa Frame blade double cut Make- HIRA/TAPARIA
GI Flange 40 mm dia heavy duty ISI Marked
GI Flange 50 mm dia heavy duty ISI Marked
GI Flange 65 mm dia heavy duty ISI Marked
GI Flange 80mm dia heavy duty ISI Marked
Stop Cock Brass 15mm dia Make - LUXOR/BIR/LEADER
Stop Cock Brass 20mm dia Make - LUXOR/BIR/LEADER
Stop Cock Brass 25mm dia Make - LUXOR/BIR/LEADER
Stop Cock Brass 40mm dia Make - LUXOR/BIR/LEADER
Stop Cock Brass 50mm dia Make - LUXOR/BIR/LEADER
GI Reducer Socket 15/20mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 15/25mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 15/40mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 20/15mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 20/25mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 20/40mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 25/40mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 25/50mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 40/50mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 50/15mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 50/20mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 50/25mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 50/40mm dia with conforming to IS 1879 ISI Marked
GI Reducer Socket 50/65mm dia with conforming to IS 1879 ISI Marked
Nut Bolt 25/75 including washer.
Nut Bolt 22/80 including washer.
GI Nipple 80mm x 100mm long with conforming to IS 1239-I ISI Marked
GI Nipple 65mm x 150mm long with conforming to IS 1239-I ISI Marked
GI Nipple 50mm x 125mm long with conforming to IS 1239-I ISI Marked
GI Nipple 40mm x 150mm long with conforming to IS 1239-I ISI Marked
GI Nipple 25mm x 125mm long with conforming to IS 1239-I ISI Marked
GI Nipple 20mm x 150mm long with conforming to IS 1239-I ISI Marked
GI Nipple 15mm x 100mm long with conforming to IS 1239-I ISI Marked
Low level flushing system Make-CERA/HINDWARE
Safeda in 200 gm pack
Painting Brush 100mm Horse Brand long hair
Painting Brush 75mm Horse Brand long hair
Painting Brush 50mm Horse Brand long hair
Painting Brush 25mm Horse Brand long hair
Plywood 6mm 8'x4' Make- Century/Kitply,Green Lam
Plywood 12mm 8'x4' Make- Century/Kitply,Green Lam
Plywood 12mm 6'x3' Make- Century/Kitply,Green Lam
Plywood 10mm 8'x4' Make- Century/Kitply,Green Lam
Plywood 6mm 6'x4' Make- Century/Kitply,Green Lam
Plywood 18mm 8'x4' Make- Century/Kitply,Green Lam
GLOBAL ENGINEERING ENTERPRISES
M/s Parveen Kumar
Vaid Enterprises
UNIVERSAL TRADING COMPANY
M/S LUCENT TRADING COMPANY
M/s Anuradha Hardware & Electric Stores
CHADHA SALES CORPORATION
ASIA ELECTRONICS
A R AGENCIES
PALLAVI ASSOCIATES
PERFECT SALES
M K ENTERPRISE
CHADHA SALES CORPORATION
Nitin Enterprises
PERFECT SALES
M/s Anuradha Hardware & Electric Stores
M/S LUCENT TRADING COMPANY
Vaid Enterprises
GLOBAL ENGINEERING ENTERPRISES
PALLAVI ASSOCIATES
M/s Parveen Kumar
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .