Developement of Public Park at Iqbal Colony near main road at Rawalpora Srinagar

Lifting / disposal of excavated/ dismantelled unservicable material from site of work to dumping site by mechinical transport including loading,unloading beyond municipal limits. as per direction of Engineer-in-charge:

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil

Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Form work centering / shuttering including Strutting, Propping etc and removal of form work for: (a) Foudation, footings, basis, coloums etc

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing and all carriages complete job as per the directions of EIC (Fine chisel dressed)

Extra for fine chisel dressed Devri Stone in square or rectangular Pillars

Providing and laying chisel dreseed Devri stone ornamantal Cornice of 75 mm thick with the width of 300 mm in cement mortar 1:6 ( 1 cement :6 coarse sand) including all carriages complete job as per the directions of EIC. (Fine Chisel dreseed)

Providing of Davri Stone Ornamantal Cap 600 mm x600 x300 mm of approved desigen and pattern in cement mortor 1:6 (1 cement :6 coarse sand) above Devri stone Columns including all carriages complete job as per the directions of EIC (Fine Chisel dreseed)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work

12mm thick cement plaster on walls in 1:6 mix (1 Cement :6 sand )

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job. (a) (Welded.)

Providing /Fixing G.I Chain Link fencing of required width in mesh size 50x50mm including strengthing with 2mm dia wire or nuts, bolts and washers of required size including painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture complete job as per the directions of the Engineer in charge. a) Made of G.I wire of dia (4mm)

Earth filling (Sweet Earth ) got by lorries including loading, unloading,ramming in layers, dressing, watering & royality including all carriages upto site of work complete job as per directions of engineer incharge. (earth stack measured will be reduced by 20% for payment )

Preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding20 cm in depth, breaking clods, watering of each layer dressing etc. lead upto 50 meter and lift upto 1.5 m complete as per direction of officer- in -charge

Rough dressing of the trenched ground including breaking clods complete as per directions of EIC

Fine dressing of the ground complete as per directions of EIC

Supply and stacking of sand at site including spreading and levelling over grass turf including cost loading ,unloading and all carriages complete job

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete (cost of sludge, manure or extra earth to be paid for separately)

Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 16 mm

Supply providing of park grade matured Deodar Tree Saplings (3'-0'' Height Minimum from trunk ) including cost of digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume flooding with water dressing including removal of rubbish & surplus eath if any with all leads & lifts including cost of Bamboo Wood support of required height

Supply providing of park grade matured Italyan Cyprus Tree saplings (4'-0'' Hight minimum from trunk ) including cost of digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume flooding with water dressing including removal of rubbish & surplus eath if any with all leads & lifts including cost of Bamboo Wood support of required height

Supply providing of Hybrid Flower saplings of different varrites including cost of digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume flooding with water dressing including removal of rubbish & surplus eath if any with all leads & lifts

Providing Fixing of 3 seater ornamental benches of specified design and specifications made of cast iron legs / arm rests. The seat and back rest made up of mild steel hollow rectangular tubes of required size and thickness fixed with legs/ arm rests with the help of nuts and bolts of required size and dia including fixing the bench in 1:2:4 cement concrete blocks including all earth work, soling, priming and painting of requried shade and all carriages and fixing charges complete job as per directions of Engineer In Charge.

Providing and Fixing of Pole Mount Stain less Steel Ornamental Garden Dust Bins 50 Ltr Capacity with stand of approved make and design including all carriages and fixing charges complete. Cost shall include anchoring of base in concrete foundation (1:2:4), complete job.as per the directions of the engineer incharge

Providing, fixing and installation of 3.00 Rmt Long Double Arm Ornamental light pole finshhed with cast iron brass coating with approved specifications of approved brand and manufacturer First Lower portion of poles along with two arms should be of cast iron and other balance portion of poles shall be of Brass Painted coated MS Pipe. Pole should have two aluminum casted lighting fixtures of size 560mm x 335mm with stainless steel screws, corrosion and UV ray resistant coating, sand blasted acrylic having LED Light 25watts, including providing of 2 core armoured copper wire 2.5sq mm with use of proctection 2 Apm MCB with make of Syska, Phillips or any other equivalent make complete job in working/finished form. Cost Shall include MS Bolts 12mm/16mm Dia as per anchoring arrangemet in pole base, complete job as per requirement at site and as directed by Engineer In Charge.The Led light shall have lumen effiiciancy ≥ of 140 LM /watt Auto on/off single piece pressure die –cast, IP66 ,I K07, CCT 5700 K, CR,>70 SDCM < 5 life of 50 K hours LB 70B50 , THD < 10% PF > 0.95 Surge. in bulit surge protiction 4 KV & 10KV SPD for LED Light.( The job also includes all fixing charges like foundation work cement concrete block for ornamantal pole.

Supply, Installation, Testing and Commissioning of LT Pannel /outdoors type floormounted with 2 Kva Servo Controlled Automatic Voltage Stablizer Single Phase 2 Wire air colled input 90-260 (P-N) output 230 VI (P-N) incomer with MCB32 A DP, 10 KVA & astronomical timer switch, overload short circuit protection. Make ABB, Havells, Cromption, L&T &T (Complete Job) as per the directions of EIC

Supply. Installation, Testing and Commissioning of 10Sqmm two core XLPE armoured Aluminium cable ( make Havells, Phillips, Bajab) excluding cost of Conduit for laying of cable 200mm below ground level.( 1.IKV grade FRLS type.

Providing Electrification (lightingng Points) using 1.50 mm and 2.50 mm guage insulated copper wire through PVC conduits including providing and fixing of 5/6 AMP ON/OFF Switches complete job as per directions at site including all carraiges by manual and mechnically complete job along with suitable size MS Box (Complete) the job also includes laying of PVC conduit 20 mm dia

Providing Electrification (Heating Points) using 4.00mm guage insulated copper wire through PVC conduits including providing and fixing of 15 AMP (Class B) ON/OFF Switches complete job as per directions at site including all carraiges by manual and mechnically complete job along with suitable size Ms Box (with 4 mm dia wire) The job also includes SITC of GI box with modular plate and cover including P/f of 6 pin 15/16 Amp modular socket outlet and 15/16 Amp modular switch connections etc.The job also includes laying of PVC conduit 20 mm dia

Providing and Fixing of 20mm Dia PVC Conduit for elctririfcation Works as per directions of Engineer In Charge (FOR MAIN SUPPLY)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 25 mm outer dia pipes

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage

Carriage of materials by mechanical transport from source upto the site of work complete job . A) Stone agg 40mm from Athwajan 8 kms lead

b) Stone agg 20mm from Athwajan 8 kms lead

Sand from Ganderbal 26 Km lead

Bricks from 20 km