E.T.No.60(W)/EDCH/2024-25

Amount

FOR REPLACEMENT OF TILTED POLS, LINES & ATTENDDING BREAKDOWN ETC. (RUNNING CONTRACT) IN THE AREA OF EDD-HAPUR, UNDER EDC., HAPUR.

Carriage of line material (like 11KV XLPE Cable 3x35-3x70+3x120-3x185sqmm, and 33KV XLPE Cable 3x185/240/300 Sqmm and LT Abc etc.) from JE Store/Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of PCC Pole 8.5mtrs long support from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of following 11mtrs long support from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

PCC Pole

S.T. Pole

Erection & Fixing of PCC Pole 8.5 mtr. long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts.

Erection & Fixing of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Erection & Fixing of PCC/ST. Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

PCC Pole

S.T. Pole

Erection & Fixing of PCC/ST. Pole 11 mtr. long in 33 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

PCC Pole

S.T. Pole

Grouting of following PCC/STP Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Laying of following XLPE Cable after digging of earth for making trench by providing good quality brick at three sides of cable and filling of soil and sand in cable trench, including cost of all required material and labour etc. spare cable shall be left in the loop shape at both ends.

(a) 3x35-3x70+3x120-3x185sqmm 11KV XLPE Cable

(b) 3x185/240/300 Sqmm 33KV XLPE Cable.

Dismantling & removal of existing ACSR Conductor and opening of all accessories and bundling the same at various places.

Stringging, Saggging of old loose ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms.

(a) ABC Conductor

(b) ACSR Weasel Conductor

(c) ACSR Rabbit Conductor

(d) ACSR Dog Conductor

Re-straightening of Tilted Pole after digging of pit of suitable size adjustment of ST/P.C.C Poles as per RESPO/Drawing Norms.

Replacement & fixing of damage X-Arm of 11 KV /33 KV Line.

Replacement & fixing of damage 11 KV Disc Insulator of 11 KV/33 KV Line.

Dismantling & Removal of old and used STP (Scrap)/PCC Pole, after digging of pit of suitable size and removal of all accessoires as per RESPO/Drawing Norms.

Laying Stringging & Final Saggging of ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms.

(a) ABC Conductor

(b) ACSR Weasel Conductor

(c) ACSR Rabbit Conductor

(d) ACSR Dog Conductor

Carriage of old & damaged STP Scrap/PCC Pole, from site of work to JE Store/Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road.,

Carriage of old & damaged scrap ABC/Acsr Conductor, from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road.,

Jumpering work properly as per RESPO/Norms.

Shree Enterprises (BID ID -5134717)

A.A.ENTERPRISES (BID ID -5134725)