Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC HOUSE NO 152 NEAR D A V KAPILDEV PUBLIC SCHOOL DELATOLI KADRU DORANDA P O HARMU P S ARGORA KADRU RANCHI RANCHI JHARKHAND 834002 | RANCHI | JHARKHAND | 834002 | ₹14.4 L | L1 | Accepted-AOC AOC |
| 2 | L2₹14.9 LRejected-Finance VEER KUNWAR SINGH COLONY BEHIND QTR NO H 150 HINNO RANCHI 834002 | RANCHI | JHARKHAND | 834002 | ₹14.9 L | L2 | Rejected-Finance Quoted higher than L1 |
| 3 | L3₹20.0 LRejected-Finance | ₹20.0 L | L3 | Rejected-Finance Quoted higher than L1 |
| Sl No | Description | Qty | Unit | M/S AMAR ENTERPRISES L2 | DILIGENT SERVICES L3 | waystone engicon private limited L1 |
|---|---|---|---|---|---|---|
| 1.00 | Design ,Fabrication,Supply, Installation, Testing and Commissioning of 12.5 (Tweleve & half) metre height hot dip galvanised high mast in two sectioned suitable for wind velocity as per IS 875 part-3 along with its all accessories i.e head frame, suitable SS wire rope, double drum winch,Galvanised lantern carriage arrangement to install minimum 08 Nos. flood Light luminaries symmetrical arrangenment with required cable coonection from panel to mast top & fitting cable connection with counter weight (08 Nos.1x200W LED Flood Light luminaries), lightning finial, suitable integral power tool motor installed inside the base compartment for its operation, trailing cable with suitable size,connector,manual handle,junction box, foundation bolts along with nuts, washers, anchor plates and templates etc. as reqiured suitable to meet out minimum average lux level of 20 lux as per ICAO standards. | 4 | Job | 1,30,000 ₹5.2 L | 1,97,000 ₹7.9 L | 1,00,000 ₹4 L |
| 2.00 | Design and casting of suitable shallow foundation with M-20 concrete for the high mast mentioned in item no.-1 considering the safe soil bearing capacity at site as 10T/Sq.Mtr at min. 2 metres depth and as per soil bearing capacity, works also included hard/soft soil exacavation & disposal for foundation including erection, testing and commissioning of 12.5 mtrs high mast system etc. as required and as per specification mentioned in TS & as per direction of EIC. ( Foundation design shall be vetted by the NIT/IIT or any Goverment institution). | 4 | Job | 40,000 ₹1.6 L | 80,000 ₹3.2 L | 80,000 ₹3.2 L |
| 3.00 | Supply,Installation,Testing and Commissioning of following type LED Flood light luminaire which should have system efficacy not less than 120 lm/W, toughened glass, secondary lens optic should have should have Narrow beam & SW beam with individual optic lens, IP66 protection, IK08 should have system surge protection upto 20 KV,single piece integral high pressure dicast aluminium housing, complete with electronic power driver, all its accessories,colour temperature should not more than 5700K , suitable to works on 230V+ 10% ,50 Hz AC power suppl etc complete as required following flood light fixtures on the lantern carrier of high mast etc. as required.
200 W LED Flood light | 40 | Each | 8,700 ₹3.5 L | 8,500 ₹3.4 L | 6,000 ₹2.4 L |
| 4.00 | Supply,Installation,Testing and Commissioning of LED Type low intensity aviation obstruction light suitable for 220 V , 50 HZ AC supply and as per ICAO standard etc. complete as required. As per list of approved make or equivalent. | 4 | Each | 5,250 ₹21,000 | 2,500 ₹10,000 | 10,000 ₹40,000 |
| 5.00 | Design,Supply,Installation,Testing and Commissioning of outdoor type distribution feeder pillar box with 40 A TPN MCB as incommer,totally enclosed,free standing, vermin dust proof,Water proof,front operated, double door made of 2 mm thick ,rubber gasket,powder coating painting with provision for incoming cable connection 35 Sqmm and out going 16 & 2.5 Sqmm terminals for the power tool motor etc. complete as required provisions for earthing, support for switchgears & busbars with suitable angle iron frame base, floor mounting, Al. bus bar,suitable for operation on 3 Phase and 4 wire, 415V, 50 Hz AC supply system including control wiring, necessary connections etc and supply & mountings of following items.
(a) 32 A TPN MCB with breaking Capacity of 10 KA -02 No.
(b )Suitable TPN Bus bars of Aluminum alloy-1 Set
(c )Power Contactor(32A,3P,3Ph,415V,50 Hz) with necessary timer,relay,MCB as required for automatic switching of luminaries,-1 Set.
(d )Power Contactor(9A,2P,1Ph,230 V,50Hz) with necessary timer,relay,MCB as required for automatic switching of aviation light, -1Set.
(e)RYB Indicating Lamp ( LED Type) - 1 set
(f) Rotary switch for auto & manual syastem-1 set
(g) Push Button for motor opeartion-1 Set
(h) Ammeter with selector switch and suitable C/T etc. -01 set
(i) Voltmeter with selector switch - 01 set
(j) 16 &2.5 Sqmm terminals/connectors for out going etc - 01 set | 4 | Job | 27,500 ₹1.1 L | 22,000 ₹88,000 | 30,000 ₹1.2 L |
| 6.00 | Supply of following sizes XLPE insulated & PVC sheathed,1.1 KV grade, Al conductor, armoured power cable confirming to IS: 7098, Part-1/1988 with upto date amendments.
3.5 x 35 Sq.mm. Aluminium conductor | 595 | Metre | 226 ₹1.3 L | 185 ₹1.1 L | 230 ₹1.4 L |
| 7.00 | Supply of following sizes XLPE insulated & extruded PVC inner sheath and PVC outer sheath solid Copper conductor armoured Control cable of 1.1 KV grade conforming to IS-7098 (part-I)-1988 with upto date amendments etc complete as required.
10 Core x 2.5 Sqmm | 100 | Metre | 220 ₹22,000 | 315 ₹31,500 | 150 ₹15,000 |
| 8.00 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable/RC Cable of 1.1 KV grade upto size 35 Sq.mm in the existing masonry open duct as required. | 40 | Metre | 22 ₹880 | 120 ₹4,800 | 30 ₹1,200 |
| 9.00 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable/RC Cable 1.1KV grade of upto size 35 Sq.mm. in the existing RCC/HUME/STONE WARE/Metal /HDPE pipe as reqd. | 435 | Metre | 14 ₹6,090 | 60 ₹26,100 | 40 ₹17,400 |
| 10.00 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable RC Cable of 1.1 KV grade upto size 35 Sq.mm. on wall surface as required.
Upto 35 sq. mm (clamped with 1mm thick saddle) | 120 | Metre | 22 ₹2,640 | 80 ₹9,600 | 40 ₹4,800 |
Tender Value
₹20.8 L
EMD Value
₹62,432
Closing Date
24 Mar 2025, 6:00 pmClosed
SM (E-E)
AAI, B.M.Airport, Ranchi
Enhancement of illumination in city side at B M Airport Ranchi. SH - SITC of High Mast and associated work.
2025_AAI_228542_1
AAI/RNC/SM (E-E)/High Mast/2024-2025
Open Tender
Electrical Works
90 days
AAI, B.M.Airport
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,180
₹62,432
DGM (E-E), AAI, B.M.Airport, Ranchi
5 Feb 2026
3 Mar 2025
26 Mar 2025
3 Mar 2025
24 Mar 2025
3 Mar 2025
3 Mar 2025 - 11 Mar 2025
10 Mar 2025
Amount
Design ,Fabrication,Supply, Installation, Testing and Commissioning of 12.5 (Tweleve & half) metre height hot dip galvanised high mast in two sectioned suitable for wind velocity as per IS 875 part-3 along with its all accessories i.e head frame, suitable SS wire rope, double drum winch,Galvanised lantern carriage arrangement to install minimum 08 Nos. flood Light luminaries symmetrical arrangenment with required cable coonection from panel to mast top & fitting cable connection with counter weight (08 Nos.1x200W LED Flood Light luminaries), lightning finial, suitable integral power tool motor installed inside the base compartment for its operation, trailing cable with suitable size,connector,manual handle,junction box, foundation bolts along with nuts, washers, anchor plates and templates etc. as reqiured suitable to meet out minimum average lux level of 20 lux as per ICAO standards.
Design and casting of suitable shallow foundation with M-20 concrete for the high mast mentioned in item no.-1 considering the safe soil bearing capacity at site as 10T/Sq.Mtr at min. 2 metres depth and as per soil bearing capacity, works also included hard/soft soil exacavation & disposal for foundation including erection, testing and commissioning of 12.5 mtrs high mast system etc. as required and as per specification mentioned in TS & as per direction of EIC. ( Foundation design shall be vetted by the NIT/IIT or any Goverment institution).
Supply,Installation,Testing and Commissioning of following type LED Flood light luminaire which should have system efficacy not less than 120 lm/W, toughened glass, secondary lens optic should have should have Narrow beam & SW beam with individual optic lens, IP66 protection, IK08 should have system surge protection upto 20 KV,single piece integral high pressure dicast aluminium housing, complete with electronic power driver, all its accessories,colour temperature should not more than 5700K , suitable to works on 230V+ 10% ,50 Hz AC power suppl etc complete as required following flood light fixtures on the lantern carrier of high mast etc. as required. 200 W LED Flood light
Supply,Installation,Testing and Commissioning of LED Type low intensity aviation obstruction light suitable for 220 V , 50 HZ AC supply and as per ICAO standard etc. complete as required. As per list of approved make or equivalent.
Supply of following sizes XLPE insulated & PVC sheathed,1.1 KV grade, Al conductor, armoured power cable confirming to IS: 7098, Part-1/1988 with upto date amendments. 3.5 x 35 Sq.mm. Aluminium conductor
Supply of following sizes XLPE insulated & extruded PVC inner sheath and PVC outer sheath solid Copper conductor armoured Control cable of 1.1 KV grade conforming to IS-7098 (part-I)-1988 with upto date amendments etc complete as required. 10 Core x 2.5 Sqmm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable/RC Cable of 1.1 KV grade upto size 35 Sq.mm in the existing masonry open duct as required.
Laying of one number PVC insulated and PVC sheathed/XLPE power cable/RC Cable 1.1KV grade of upto size 35 Sq.mm. in the existing RCC/HUME/STONE WARE/Metal /HDPE pipe as reqd.
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable RC Cable of 1.1 KV grade upto size 35 Sq.mm. on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
Supplying and making end termination with brass compression gland and aluminium/copper lugs for following size of PVC insuated and PVC sheathed/XLPE power cable of 1.1KV grade as reqd. 3.5 x 35 Sq.mm. Al Cable
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Supplying and fixing of 25 mm X 5 mm G.I strip on surface/reccese etc as required.
Excavation of hard rock for existing concrete platform/cable trench up to width of 1.5 mtr & lift upto 1.5 mtr including getting out and disposal of excavated soil as directed by EIC.
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 50 mm dia
Supply of 50 mm dia ISI marked HDPE pipe as per IS 4984:2016 of PE 80 grade and PN 6 rating complete etc. as required.
Providing the HDD upto a depth of approx 2 mtr. Suitable for laying of 50 mm dia HDPE pipe etc. as required.
M/S AMAR ENTERPRISES (BID ID -832953)
DILIGENT SERVICES (BID ID -833367)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid