REPAIR TO TOILET AND KITCHEN WITH PLUMBING FITTING ROOF REPAIR AT OFFRS MD ACCN AT MANEKSHAW MARG, URBAN VILLAGE AND CASSEL ROAD UNDER GE (EAST) DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed by Engr-in-Charge.

(a) Dismantling of floor of bathroom and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges complete all as specified and as directed by Engr-in-Charge. b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques as per site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top® Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. d) M&L for protection plaster 15mm thick in cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each bathroom/toilet portion is n.exc 4.00 Sqm each.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

S&F 15mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and as directed by Engr-in-Charge.

S&F 20 mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and as directed by Engr-in-Charge.

S&F 25 mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and as directed by Engr-in-Charge.

M&L for taking down old 40 or 50 mm dia bore water tubing and refixing in new or old position with new fittings complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick CM 1: 4 on fair faces of brick work or concrete surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for screed bed 15mm thick CM 1:6 for laying of floors finishes complete all as specified and as directed by Engr-in-Charge.

M&L for coloured non skid ceremic tiles 7-8mm thick (Square/reactangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.

M&L for glazed coloured ceremic tiles sizes 600x300x 7-8mm thick tiles on vertical surfaces , such as skirting/dado ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and as directed by Engr-in-Charge.

M&L for Vitrified Ceramic tiles (light shade) 8 to 10 mm thick (square/ rectangular) polished, area of each tiles n exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and as directed by Engr-in-Charge.

S&F CPVC pipes 15mm bore of pressure rating 10kgf/sqcm, cutting chases with electric operated diamond blade cutter by highly skilled pipe fitters,removal/replacement of existing water supply tubing for addition and alteration incl screwing existing tubing for in position with or without taking down for 15-20 mm size pipe, jointing using weld solvent system as per manufactures instructions with all necessary brass threaded fittings of the similar make, making good the existing finishes complete all as specified and as directed by Engr-in-Charge. (Make- Finolex, Tirupati, Astral)

S&F in repairs CP brass WHB mixer for mixing hot & Cold water screwed down for iron pipe 15mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CP brass wall mixer 3 in 1 (having leg/bend/arrangement for connection to shower) for mixing hot & Cold water screwed down for iron pipe 15mm bore incl hand shower with flexible pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white, complete all as specified and as directed by Engr-in-Charge.

Supply only in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.

S&F in repair 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and as directed by Engr-in-Charge.

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by Engr-in-Charge.

S&F in repair waste fitting 32mm dia , CP for WHB/Sink with long screwed shunks and nuts complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete all as specified and as directed by Engr-in-Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-Charge.

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore 2 way bib tap chromium plated brass with flange complete all as specified and as directed by Engr-in-Charge.

S&F in repair Toilet paper holder SS fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-Charge.

S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as specified and as directed by Engr-in-Charge.

S&F in repairs brass CP health faucet with 1.00mtr long CP flexible pipe as per approved sample complete all as specified and as directed by Engr-in-Charge.

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-Charge.

S&F in repair CP brass towel ring round with round flange fixed with screw to wall complete all as specified and as directed by Engr-in-Charge.

S&F in repair grating doom 100mm dia of PTMT complete all as specified and as directed by Engr-in-Charge.

S&F in repair Stainless steel soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete all as specified and as directed by Engr-in-Charge.

S&F in repair Bib taps standard of PTMT any colour screwed, for iron pipe 15mm bore and fixed ( Minimum weight 15 mm- 90 gms) complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of oil emultion distemper on new plastered surfaces of wall over one coat of primer including prepration of surface complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of oil emultion distemper over one coat of primers and on old surfaces of wall duly prepared incl complete removal of existing treatment complete all as specified and as directed by Engr-in-Charge.

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wastes pipe, cast iron cantilever bracket and connecting union to pipe overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mm complete all as specified and as directed by Engr-in-Charge. (Make- Maharaja/Nirali/Prayag)

S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete all as specified and as directed by Engr-in-Charge. (Make- Maharaja/Nirali/Prayag)

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.

M&L for 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms,dado/wall and like over and including 15mm thick cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed by Engr-in-Charge.

S &F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engr-in-Charge.

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed by Engr-in-Charge.

Taking down existing celing any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) S&F 25 x25 x1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) S&F E-board 4mmthick self design type ceiling tiles of size 595mm x 595mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape complete all as specified and as directed by Engr-in-Charge. Shade and pattern of E- board shall be as approved by GE.

S & F in repair Sand cast iron soil waste and vent pipes 100mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed by Engr-in-Charge.

S&F in repair Sand cast iron soil waste and vent pipes75 mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed by Engr-in-Charge.

S&F CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed by Engr-in-Charge.

S&F CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 18/19 mm prelaminated paticle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drowers, cupboard, partition including wooden/PVC lipping/beading on exp as required etc complete all as specified and as directed by Engr-in-Charge.

S&F Continuous( piano) hinges(width of flaps 40mm when open , mild steel , bright finish or electr galvanised complete all as specified and as directed by Engr-in-Charge.

S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified and as directed by Engr-in-Charge.

S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge.

S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel ,bright finished complete all as specified and as directed by Engr-in-Charge.

S&F 75mm Brass handle, cast type, polished bright complete all as specified and as directed by Engr-in-Charge.

S&f of telescopic channels (18/20 inches in length), rollers for smooth sliding of drawers complete all as specified and as directed by Engr-in-Charge.

Demolition of concrete (unreinforced) in other than ground floors n exc 15 cm thickness as in PCC pading /tank staging etc complete all as specified and as directed by Engr-in-Charge.

Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed by Engr-in-Charge.

Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out old membrane/grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped, complete all as specified and as directed by Engr-in-Charge.

M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for 10 mm thick cement screed bed on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately as supply only) complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.30Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric mambrane minimum weight 3.5kg/Sqm and of minimum thickness 3mm, reinforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gas/torch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

S&F PVC (SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls with PVC brackets/clips/clamps etc complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-Charge.

S&F in repair Modular Kitchen, base cabinets (with a depth of 600 to 700mm) and upper cabinets (with a depth of 200 to 300mm) made of 16mm thick HDHMR board of Action Tesa or equivalent with decorative laminations on both sides(Min superfacial area is 8 sqm), including following stainless steel fittings/accessories, complete all as specified and as directed by Engr-in-Charge:- a) Drawer silent system imported 600mm wide and 100mm high-01 Nos (Make- Azalea or equivalent as approved by GE). b) Drawer silent system imported 600mm wide and 150mm high-01 Nos (Make- Azalea or equivalent as approved by GE). c) Hinges silent O crank- as required (Make- Hafte of German or equivalent as approved by GE). d) Cutlery tray PVC 600mm wide and 75mm high- 01 Nos (Make- Hetich or equivalent as approved by GE). e) Handles rose gold G shaped provided to base unit-02 Nos. f) Handles rose gold G shaped provided to upper unit-01 Nos. g) Matt roll anti skid in drawers - 03 Nos. h) Pattern and design of kitchen cabinet shall be as per standerd pattern and as directed by Engr-in-Charge. (Note:- Rates for demolition Old existing U/S particle board shall be deemed to be included in quoted rates of above item)

S&F in repair 25 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair 32 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair 40 mm bore gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded polyethylene Water Storage Tanks 5000 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position including dismantling existing water tank complete all as specified and as directed by Engr-in-Charge. (Note- Tank to be fixed in multistorey bldg with occupants so tank should be fixed within few hours and necessary T&P, scaffoling is included in Quoted rates.)

S&F in repairs Vitreous China (Star white) WHB counter type of size 550x440mm including CP waste fittings, complete all as specified and as directed by Engr-in-Charge.

Vipul Construction

S GOURAV PRAKASH ENTERPRISES

sunil traders

imran construction company

M/s Shubh Enterprises