SPECIAL REPAIR TO ROAD FROM SQUASH COURT GATE TO VI GATE ALONGWITH CONNECTED ITEMS AT MCEMEUNDER GE MCEME SECUNDERABAD

M&L bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness with 5.5 % binder content using paving bitumen of grade VG-30 penetration by weight of total mix laid using mechanical paver, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne power roller and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly a priming / tack coat with bitumen primer at 5 Kg per 10 Sqm using paving bitumen over existing black top surfaces complete all as specified and directed.

Note: For design purpose min. binder content is specified as 5.5% for VG-30 grade bitumen and it shall not reduce under any circumstances. During design stage, if binder content exceeds 5.5% no extra payment shall be made to contractor for excess use of binder.

M&L for repair to pot hole of any depth exc 30 mm and n.exc. 1.00 sqm each and including sweeping free from dust and mud water, scouring sunken surface in road etc, cutting around edges to at least 25 mm in depth making good by applying tack coat at 5 kg per 10 sqm putting in premixed bitumen macadem, well rammed and sealed with binder 9.8 kg per sqm, blinded with 0.09 cum stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings) complete all as specified and directed.

M&L consolidated thickness 75 mm or less, premixed bituminous macadam laid, spread using mechanical paver with 4% binder content by weight of total mix, using paving bitumen binder of grade VG-30 grade by weight of total mix, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne complete all as specified and directed.

M&L preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed.

S&F in repairs cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F in repairs solar cat eye aluminum alloy shall (100 % water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions complete all as specified and directed.

S&F in repair metal tubular delineator made out of ABS round body and including fitted with 2 Nos. 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45 / 50 mm bore MS pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection and embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B1 with necessary excavation complete all as specified and directed

M&L brick work with fly ash, modular bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specificed and directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), and including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including demolition complete all as specified and directed.

M&L preparation of new concrete surfaces of any description not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of priming paint complete all as specified and directed.

M&L preparation of new wall / pillar surfaces and including applying two or more coats of 100% Premium acrylic emulsion (weather proof) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as per manufacturer's specification complete all as specified and directed.

M&L preparation of old chequered / interlocking floor tiles and inclding applying one coat of acrylic weather proof Paint (Apex floor guard and tile guard ) on floors complete all as specified and directed.

M&L prepration of old painted concrete surfaces over 10 cm girth or width, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair speed breakers (ABS) product of 350 mm wide and 50 mm height in yellow and black color (alternative) all as per manufacturer's instruction complete all as specified and directed.

S&F in repairs 75 mm dia convex mirror mounted on and including metal sheet body and frame work suitable for road side mounted on angle iron (50 x 50 x 6 mm) for mirror bottom each 1.20 m high above GL and fixed with PCC 1:3:6 type C2 with necessary excavation complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) soil, waste pipe in any length single socketed with rubber ring jointed laid in trenches or in floors complete all as specified and directed.

All as per Sl. Item No. 17 above but 75 mm bore.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in subbase of flooring / hard standing complete all as specified and directed.

M&L sand cushioning for laying of precast concrete interlocking tiles and including watering and consolidation complete all as specified and directed.

M&L 80 mm thick, M 40 grade machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 using grey cement & pigment and demolition complete all as specified and ditected.

M&L PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in coping etc, and including weathering, slightly rounded or chamfered angles and throating complete all as specificed and directed.

M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments and including 15 mm thick screed bed in CM 1:6 for laying floor finishes and demolition complete all as specificed and directed.

M&L for providing and laying factory made PCC M20 grade precast drain of size 600 x 450 x 80 mm thick (saucer of size 300 x 40 mm) and including fixed in position to the required line and gradient, jointed with in CM 1:3, making drainage opening wherever required and demolition of existing PCC complete all as specificed and directed.