SPECIAL REPAIRS TO BLDG NO. P-119 (RICE ISSUE SHED), P-879 AT MIL STN JAISALMER UNDER GE (A) JAISALMER

Amount

Supply only integrated water proofing compound complete all as directed by Engr-in-charge.

M&L Squared rubble walling jodhpur type ,brought up to coursesd ,well bonded ,bedded solidly hearted & builted in CM 1:6

M&L Squared rubble walling jodhpur type ,brought up to coursesd ,well bonded ,bedded solidly hearted & builted in CM 1:6 but except stone

Extra for stone walling for hammer dressing to face stones and dressing of the face beds & Joints all as specified.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel all as directed by Engineer-in-Charge

Taking down Chowkats or frames n exc.1.5sqm but with shutters (without taking off shutters from the frames)

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc all as specified and as directed.

S&F factory made solid PVC moulded masonic door shutter 28 to 30 mm thick (style) with 2, 4, 6 raised panel design with 2 mm moulded PVC sheet on the front face and2 mm moulded PVC sheet on back face supply and fixing in the frame at site as per specification with particle board core complete all as specified and directed.

S & F mild steel tower bolts 150 mm long stove enameled black with bright bolt complete all as specified and directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete.

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S&F Butt hinges 100 mm including necessary welding if required all as directed by Engr- in -Charge.

S&F in repair Single action spring hinge mild steel with steel wire springs stove enamelled black 100mm long including taking down of shutter and refixing in same opening, easing complete all as directed by Engr-in-Charge.

S & F MS Pressed handle 150mm size oval type stove enameled black

S&F 150 mm long Aluminium handles, cast type, anodised complete.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W E-250, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S&F steel ventilators with top hung shutters fitted with box type hinges including MS peg stays, MS handle and glazing bars dovetailed or welded for receiving glass including painting with one shop coat of zinc chromate primer,and cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) and applying two coats existing wall finishes to match with existing colour complete all as specified and directed by Engineering –in-Charge. Note : The rates quoted are inclusive of making good all the disturbed surfaces to match with the adjoining surfaces and necessary scaffolding etc up to 4th floor.

S&F steel window with side hung shutters fitted with box type hinges including MS handles, peg stays, MS guard bar made out of 10 mm squre bar, glazing bars dovetailed or welded for receiving glass and including painting with one shop coat of zinc chromate primer including cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) and applying two coats existing wall finishes to match with existing colour complete all as specified and directed by Engineering –in-Charge. Note : The rates quoted are inclusive of making good all the disturbed surfaces to match with the adjoining surfaces and necessary scaffolding etc up to 4th floor.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with guard bar, without glazing bars, dovetailed or welded.all as per item No. 70 aboved but without glazing bars

Welding in repairs exc 2.5cm but not exceeding 5cm in length (thickness of metal to be welded not exc 6mm ) including cleaning preparing the surface and holding the member in true position complete all as specified and directed by Engineer in charge.

Prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws inclduing dismantling existing plain or corrugated steel sheeting any gauge (Corrugated, Semi corrugated etc.) sheets in roof coverings.

M&L for Machine cut kota stone slab (Mirror polished) flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes, complete all as specified and directed by Engr-in-Chargecomplete complete all as directed by Engr-in-charge.

S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank.

M & L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing including over a backing coat of 10mm thick in CM 1:4 for laying floor finishes all as specified.

M&L for granite slab of any type of 18mm thick machine cut bedded and jointed with grey cememt slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and plishing complete all as specified and directed.

M&L for Glass dividing strips, 3 mm thick, 38 mm wide inserted in position confirm to design.

Dismantling floor, hearth or wall tiling including cement mortar, removeing and rubbish off the premises.

Rendering 5mm thick in CM 1:4 on ceiling concrete surfaces finishing even and complete all as directed by Engr-in-Charge

M&L Screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes, complete all as specified and directed by Engr-in-Charge

Taking down cement plaster on brick/concrete/stone masnory surfaces of any description all as directed by engr-in-charge.

M&L three coat of white wash on new surface of ceilling including preparation of surfaces complete all as directed by Engineer-in-Charge.

S & F 4 mm thick plain glass and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame exc 1.5 sqm including punching or drilling out old glazing pins/ springs clips and providing and fixing new ones.

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L Preparation of old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed by Engineering in charge.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S&F GI tubing (ISI) marked) medium grade with all fitting including taking down old pipe and fixed complete to wall ceiling or laid in floors including taking down old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-following sized :-

(a) 15 mm bore

(b) 20 mm bore

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap).

S & F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S&F stop valve 15 mm bore CP fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repairs.

S&F in repairs PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed in repairs.

S & F in reapir 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls all as directed by Engineer-in-Charge.

S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs. (Make:-Cera Cat No S3010102 , Hindware Cat part No - 20042)

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

Demoiliton of stone slabs and tiles of any description or thickness in foors, aprons etc

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for drain

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land all as directed by Engineer-in-charge.

Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

S&F Double action spring hinges 150 mm size mild steel with steel wire springe stove enamelled black complete conforming to IS

M&L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement

M&L for ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.18sqm but not exc 0.38sqm as in skirting, steps etc in vertical surfaces with 10mm thick in CM 1:4 rendering as in backing coat

M&L for ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.18sqm but not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm)

S&F chequered cement concrete tiles 30cmx30cmx22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors including over a screed bed or bedding layer of 15mm thick in CM 1:4 for laying floor finishes with 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base etc.

M&L for rendering 5 mm thick on concrete surface in cement mortar 1:3 & finished the surfaces on ceiling even & fair without using extra cement all as specified.

Rendering 15mm thick in 1:6 on fair faces of brick work or concrete surfaces finishing even and smooth .

Rendering 15mm thick in cement mortar CM 1:4 in two layer (First coat 10 mm thick and second 5 mm thick)using water proofing compound @ 3% by weight of cement and finished fair and even. (WPC will be measured and paid separetly).

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 & finished the surface even & fair without using extra cement all as specified.

Preparing old plastered or un plastered surfaces and applying one coats of cement base paint on surfaces of walls, column, beam, chajjas etc.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of distemper oil emulsion on surfaces of walls.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as directed by Engineer-in-charge.

M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of old decorated plastered surfaces of walls and applying two coat of cement base paint complete all as directed by Engineer-in-charge.

Preparing New plastered surfaces and applying two coats of distemper oil emulsion including preparatory to distempering on surfaces of walls.

M&L Preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces all as directed

M&L for preparation of old decorated plastered/unplasterd surfaces of ceiling and applying two coat of white washing complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying two coat of white washing complete all as specified and as directed by Engineer-in-charge.

S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane including Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads complete all as directed by Engr-in-charge.

S&F in repairs 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed by Engr-in-Charge.

S&F bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia fixed in repairs.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.(Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird)

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150gm/sqm) laid on primed surface by torched application complete etc all as per manufacturer instructions and sealing all the over laps of 75mm in length side and 100mm on the width side of membrane all as specified and directed including following (i) Complete removal of existing unserviceable water proofing treatment including taking down plaster, padding of any description and any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new W.P.T including removing off rubbish at a distance not exceeding 1000 m complete all as specified and directed by Engineer-in-Charge. (ii) Roughening surfaces of old concrete floor by picking, sweping, cleaning and washing down with water to remove dust etc. (iii) Brushing neat cement slurry @ 3.0 Kg of cement per Sqm area over old concrete surface (iv) M&L screed bed 15mm cement plaster in CM 1:4 on concrete surfaces duly mixed with water proofing compound and finished even and smooth by using steel trovel (WPC will be measured saprately) complete all as directed. (v) M&L for 50 mm avg thick PCC padding in cement concrete( 1:2:4),type B0 (Using 12.5 mm graded stone aggregate) finished even and smooth without using extra cement for laying of WPT . (vi) Applying 1 coat or bituminous primer conforming to IS-3384 @0.3 lts/Sqm (vii) Applying 2 coat of Al paint @ 100 ml/sqm

Taking down all loose plaster and concrete if any in RCC columns, Chajjas, beams,slabs or any other type of RCC members,removing all loose ruts/scale from reinforcement etc by using wire brushes ,sand paper or any other chemicals, applying a coat appoxy coating on old reinforcement, tying IRC fabric of size 75x75mm of 3mm dia and binding with mild steel wire annealed with exsting reinforcement and applying cement slurry uniformaly to exposed surfaces and gunniting using CM 1:3 avg thickness of gunniting not less then 30mm and finishing the surfaces with 10mm thick rendering in CM 1:4 finished even and smooth with out using extra cement and removing the debris from the site, complete all as specified and directed by Eng-in-charge.

S&F in repair framed work, trussed,purlins,rafters,rails, colmns and fastenings and heavy bracket framing (pipes ,beam,tee,angle,channel ,hallow sections)including distance pieces,cleats,hook ,clips etc

Taking down carefully old copper/Aluminium point wiring , fitting and fixtures complete such as switches,ceiling rose, pendenent, regulators, sockets etc , removing unserviceable materials from site and making good disturbed surface etc complete as per arrounding and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down old FTL tubelight fitting bldg security light of any type

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC conseled conduit and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FR LS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-

(a) One light controlled by one switch 5 Amp one way

(b) One fan point controlled by one switch 5 Amp one way

(c) One socket outlet 3 pin 5 amps same board

(d) One socket outlet 3 pin 5 amps Independent board

All as per Item No. 5 above but with stranded copper conductor 4.0 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 4.0 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F in repair of modular type 1 way 6 Amp complete all as specified.

S & F in repair of socket ,6 A - 2/3 pin combined 2 modue complete all as specified.

S & F in repair of modular switch 1 Way 16 A,1 module complete all as specified.

S & F in repair of socket 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F ceiling rose three terminal 230 volt

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified.

S&F in repair MCB DBs sheet metal enclosure Triple pole and neutral 415 Volt with 200 Amps rated bus bar 6 way double door type complete all as specified.

S&F in repair MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 8 way double door type complete all as specified.

Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

Supply and fixing MCB's SPN 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

Taking down ceiling fan / Exhaust fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and as directed.

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Fixing only ceiling / exhaust fan after serviceing greasing change of bearing if reqd, including making serviceable and noise free in all respect and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

Supply and fixing MCB's TPN 63Amps, 415 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

S & F for LED tube light fitting 10 Watt, 2 Feet or 290 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 20 Watt, 4 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

S & F in repair bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers,painting complete as specified.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conceled conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable one run of PVC conceled conduit shall be paid as one unit length)

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead up to Panel by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing point terminal and PCC chamber including taking down old unsv earhting plate of any size complete all as specified and directed.

Taking down old unsv tube light fitting of any wattage/street light of any zise complete all as specified.

S & F in repair of modular switch 1 Way 16 A,1 module complete all as specified.

S & F for LED down light recess mounted luminare, square type 15 watts worm white in colour with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz Complete all as specified Make: Philips Havells, Wipro

Fixing Only Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting type Complete all as specifed

S&F freedom type LED street light fitting 30 Watts pressure die cast aluminium housing,heat resistant glass,IP 65 protection better optics for unifrom distribution twin core copper flexible cable of size 0.75 Sq mm complete all as specified. Make Wipro, Philips, Havells

M & L for Painting of DB Box Panel after scratching of old rusted surface and old existing painted corroded surface of any description two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally after scratching existing rusted surface and apply one coat of primer complete all as specified.

M & L for XLPE insulated,armoured heavy duty electric cable wiyh aluminium conductor,1100 Volts,grade,cross sectional area 16 Sqmm x 2 core Saddling required on building complete all as specified and directed..

S & F for GI tubing 40 mm dia light grade galvanised laid in wall ceiling & Floor including all fittings all as specified and directed.

BHAGWATI CONSTRUCTION

Leelashah Enterprises

M/s Shri Inder Construction Company

M/S SIDHU CONSTRUCTION COMPANY