Providing the Digital Smart Class Equipments, Furniture, False Ceiling, Colour Washing and Electrical Arrangements for Sevilimedu Municipal Corporation Middle School in Kanchipuram Corporation.

Amount

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying, fabricating, erecting and fixing Hilux Board Plain Sheet (10mm thick) Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level M-0618

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. M-0673

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supply and Fixing of Premium Vertical Blinds including cost and conveyance of all materials and labour charges etc complete PWD SOR M-0655

Supply and Installation of 75", 4K, Android - 13, Interactive Touch Profesional Display with USB-C, HDMI-In & Out for Active LED Video Wall and Video Conferencing System PWD SOR M-2769

Supply and Installation of 4K Video Projector LED 24x7 Signage Professional Display 5200/5000 Lumens, Laser, WUXGA, Constrast ratio:1920 x 1200 PWD SOR M-2760

Supply and Installation of Wall Mount Speaker 20W RMS Bi - Directional Sound Projector M-2728

Supply and Installation of UHF wireless Conference Mike system of Rechargeable battery for Delegate / Chairman Unit (Backup Upto 8 Hours) M-2717

Supply and Fixing of wall mounted Ceramic Coated Magnetic Steel Green Dry Erase chalk Writing Board size of 2400 x 1200mm including the cost of Installation, Transportation, Installation Accessories, Testing and Commissioning etc., complete as per standard specification. (Quotation) • 0.36 mm thick, Ceramic Coated Magnetic steel. • Green Chalk Writing Sheet. • Core Material 9mm thick MDF Board. • 1.2mm thick Wrought Aluminium & Alu Alloy Frame. • Galvanized steel sheets and strips. • ABS Corner

Supply and Setting OF 4G Hotspot device having the following specificatons of Router Type:wireless Networking Standards WAN:LTE, WLAN :IEEE 802.11 b /g/n 2.4GHz only WiFi:yes OS Capatibility :Vista/Win 7/Win 8/Win 10/MAC/Linux, Charger:2700 mAh Li-on rechargeale battery that can support 5-6 hours of use on full charge . Warranty :1 year, Network Support:5G/4G/3G/2G, No of connecting Device :10 Download speed up to 150 MBPS& up load Speed Up to 50 MBPS. 1 Year subcrition of unlimited internet access. Usage of 75" Interactive Display Panel (As per Quotation)

Supply, Delivery and Installation HP 12th Generation Intel® Core™ i5 processor Windows 11 Home Intel® UHD Graphics 730 8 GB DDR4 RAM 512 GB SSD Solid State Drive HP 125 USB Black Wired Keyboard and Mouse 1 VGA; 1 HDMI-out 1.4b 60.5 cm (23.8) FHD (1920 x 1080 @ 75 Hz) Flat VA with Edge-lit HDMI, VGA Tilt Stand On-screen controls, Low blue light mode, Anti-glare excluding GST Charges of 18% etc., Complete as per standard specifications (Quatation)

Supply and Delivery of S - Type Office Reception SS Steel visitor chair / Mesh Back Chair with Cushion including cost and conveyance of all materials, transportation and labour charges etc., complete directed by the departmental officers (Quotation)

Supply and Delivery of Office Wooden Table designed with OST sheet size of 1.50 x 0.90m and height of 0.90m including fixing the drawer on both side and 12mm thick plain toughened glass on table top with corner nosing on both side including cost and conveyance of all transportatation and labour charges etc complete as per departmental officers (Quotation)

Supply and Delivery of Smart Class Furniture's with Single Seated Power Coated Perforated MS Foldable Writing Pad Chair one side with other side open MS Pipe dia 19mm and wall thickness 16mm gauge & Wooden Writing pad size of 600 x 300mm including cost of materials, transportation and labour charges etc., complete as per standard specification. (Quotation)

Supplying and laying wooden Stage flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete M-0650

Supply and Fixing of Fabric Pinup Blue Notice Board size of 1200 x 1500mm including the cost of Installation, Transportation and labour charges etc., complete as per standard specification. (Quotation) • Front cover material - Acrylic 2mm thick. • Rear Cover Material - Laminated Sheet. • Overall pinability depth of Board - 2000mm . • Front Layer cloth - Woolen Blezer Cloth. • Core Material - 9mm thick. • Alu Frame Board

Supply and Pasting of Vinyl Flooring 2mm thick having adequate flexibility, slip resistance, abration resistance, fungi and bacterial resistance and good resilience PWD SOR M-0649

Supply, Delivery and Installation of Air Conditioner with copper coil 2 TR Split Type AC Unit 3 Star Rated.PWD SOR M-1987

Supply and Installation of 5 KVA capacity Automatic Voltage Stablilizer with time delay relay SOR M-1989

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 meter supplied with AC unit) PWD SOR M-1990

Supply and fixing of MS stand for fixing outdoor unit M-1991

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) SD 143

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW Switch box with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 Point per coil) SD 22

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW Switch box for 5A 3 pin non inter locking wall socket with 5A flsuh type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point SD 36

Wiring with 2 x 4 sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW Switch box for 5A 3 pin non inter locking wall socket with 15A flsuh type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Power Plug point SD 39

Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC Insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour SD 54

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 466

Supply, delivery and fixing of LED 3000K Square Type Recessed Fitting including cost and conveyance of all materials and all labour charges etc., complete

DEEPTHY WRITOOLS CORP (BID ID -1269420)