COMPREHENSIVE MAINT AND CERTAIN MISC REPAIRS/ REPLACEMENT, PERIODICAL SERVICES, REPAIRS TO JOINERY, WINDOWS, VENETIAN BLINDS, FLOORING/ SANITARY FITTING AND OTHER MISCELLANEOUS WORKS AT CENTRAD COMPLEX UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description not exc 1.5 sqm complete all as specified and directed.

Taking down door shutters of any description not exc 1 sqm each complete all as specified and directed.

Taking down door shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and as directed.

S&F Factory made solid PVC moulded door shutter with Particle Board Core, 28 to 30 mm thick (Stile), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as specified.

S & F 35 mm thick flush shutter solid core construction with block board core and plywood face panels with decorative face veneers both faces with lipping complete all as specified and directed.

S&F Powder coated aluminium window and ventilator shutter, side hung type without sas bar, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , anodised aluminium fitting such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified.

S&F Powder coated aluminium Door shutter with frame, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, glass 5.5mm thick, anodised aluminium fitting hinges type B-21 150mm long (3 Nos) handle (2 Nos), Tower bolt 250mm (02) Nos complete all as specified.

S&F IInd class hard wood 25 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for scuring glass, etc and fitted in chowkats complete all as specified and directed s of members of shutters as specified and directed.

S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repair box type Cup Board made out of 18/19mm thick PVC moulded solid board, one side prelaminated, with self and shutter, full size fitted under/ above the kitchen cooking platform and other platform including provision of all fixing arrangement /fitting & fixtures (magnetic catches, piano hinges, knob, SS Screws etc) complete all as specified and as directed. (Note: For Payment purpose, only front area of cupboard shutter shall be measured).

S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, complete all as specified and directed.

Hacking out old broken glass (any thickness) from metal frame/ aluminium frames including punching or drilling out old glazing pins complete all as specified & directed.

S & F 5.5mm thick sheet glass, ordinary quality not exc 0.5 Sqm in each pane and glazing with oil putty/ rubber beading as required complete all as specified & directed.

S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 125 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 125mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F in repair brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified. Make – Hardwyn/ Godrej/ Harrison)

S&F in repair stainless steel curtain rails, with fixing brackets stops, rollers complete all as specified and as directed.

Dismantling wall ceiling boards, wall panelling (Fibre pulp. Insulation, AC boards, wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness complete all as specified & directed.

M&L Solid PVC Wall Panelling consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S & F in repair vertical venation blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed. Make : Vista /Hunter Douglas.

S & F in repair roller blinds of any size and any colour (non-blackout series) with aluminium head rail, with chain operation complete all as specified and directed by Engr-in-Charge. (Make: Vista/Hunter Douglas)

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed.

M&L preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of Old surfaces & applying one coat of French polish on wooden surface of any description, width or girth complete all as specified and as directed.

M&L preparation of old Steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over old or new wall/ceiling surface to prepare the surface even and smooth.

M&L for preparation of Old plastered wall surfaces & applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of Old ceiling surfaces & applying one coat of oil bound distemper complete all as specified and as directed.

M&L for applying two coats of exterior texture paint of required shade on existing wall including scaffolding at all height etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for any work.

M&L for framed work such as grills grating, etc with ends of bars shouldered and/ or riveted for forged into spikes framed guard bars, barred iron doors ladders framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 all as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces & applying two coat of Synthetic enamel paint over a coat of primer complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position complete all as directed.

M&L PCC 1:2:4 Type B1 using 20 mm graded aggregate in coping, kneelers, apex stones, bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement 1:4 on fair faces of brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound emulsion distemper over and including a coat of primer with chalk whitening complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement to match the shade over and including 15 mm thick screed bed in Cement Mortar 1 : 6 complete all as specified and as directed.

M & L for Coloured Glazed ceramic tiles in vertifical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm thick rendering in Cement Mortar 1:4 complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified and as directed.

M&L for 19-20 mm thick Granite work in platforms, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & moulding the edges of granite including 20 mm thick screed bed in Cement Mortar 1:6 complete all as specified and as directed.

M&L 22-25 mm thick machine cut kota stone flooring laid over and including screed bed or bedding layer mortar 20mm thick in cement mortar 1:6 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the shads incl rubbing and polishing upto mirror image complete all as specified and as directed.

M&L 22-25 mm thick machine cut kota stone in riaser of steps, skirting/dado and pillar laid over 10 mm thick rendering coat in cement mortar 1:4 complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling of PVC pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed.

S & F 110 mm thick PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 75 mm thick PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F in repair 75mm dia PVC bends for pipes complete all as specified and as directed.

S&F in repair 75mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F in repair 100 mm dia CI bends for CI pipes complete all as specified and as directed.

S&F in repair 100 mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F in repair 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair white vitreous china battery based infrared senser operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-0704 & SNR-CHR-51097 or equivalent model of Parryware/Hindware

S&F in repair Rectangular shaped urinal partion with frosted glass size height 900mm width 450mm. Make Jaquar Cat No : IARA : 1810-US or equivalent model in Parryware/ Hindware.

S&F in repair vitreous china floor mounting WC one piece water closet as per existing trap position size approx size 790 x 350 x 630 mm of approved shape including white vitreous china cistern with dual flush fitting, of flushing capacity 4 Ltr/ 8 Ltr including seat cover & health faucet complete all as specified & directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe)

S & F in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug and making good the surface by white cement to match the wall shade complete all as specified and directed.

S & F in repair 10 Ltr PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, complete all as specified and directed.

S&F in repair Kitchen sink of size 915mm x 460mm bowl size 410mm x 330mm x 160mm with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union & pipe complete all as specified and directed.

S&F in repair bevelled edge looking mirror 6mm thick of approved shape & size of superior quality glass mounted on wall with screws, washers complete all as specified & directed.

Dismantling water tanks exc 500 & not exc 1000 ltr capacity and removing to store.

S&F 500 ltr Rotational moulded Polyethylene water storage tank triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 1000 ltr Rotational moulded Polyethylene water storage tank triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repair Table top wash basin, white, flat back size 525x415x140mm of Make- Jaquar cat part No JDS-WHM-25907N or equivalent model in Hindware/ Parryware excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin, with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

M & L post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 Ltr / hole by drilling 6 mm dia holes at a down load angle of 45 degree at 150 mm c/c and sealing the same complete all as specified and directed.

Adjustment & repairs/ replacement of joinery fittings, joinery items, such as; brass butt hinges, hydraulically regulated door closer, brass mortice lock, door stopper, aluminium D type handles, tower bolts, sliding door bolt, aluminium door pivots, drawer locks, wiremess, drawer channels & petty repairs like taking down & refixing, easing of doors etc complete all as specified and directed.

Adjustment & repairs/ replacement of sanitary fittings, plumbing items, leaking to stop cock, bib cock, pillar cock, gate valve, PVC connection, CP connection, making fully functional the leaking flushing cistern single/ double symphonic type of any description of any size and taking down carefully chromium plated bottle trap, waste coupling, PVC/GI waste pipe of size 32/40 mm die waste water connection to WHB/Urinals, sensor taps, etc and removing all accumulated materials from the trap etc cleaning properly and refixing in the same position complete all as specified and as directed.

Note for Item No 86.00 & 87.00: (i) The rates quoted in the above item includes cost of T&P & petty materials for repairs like Nails, Screws, fevicol etc complete. (ii) Adequate tradesman/ supporting manpower shall be deployed by the contractor and they shall be present on all working days including Saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The supervisor/site engineer of the contractor will receive detailed instructions from concerned AGE/JE every morning for attending complaints on daily basis. The The persons will be detailed by AGE/ JE concerned every morning for attending complaints on daily basis. Attendance register shall be maintained at site. (iii) The material required will be paid under separate item in supply only and labour contents included in this item. (iv) The complaints shall be attended on the day the complaint received before 1300 hrs. The complaints received after 1400 hrs will be attended on the other day before 1300 hrs. If complaints are not attended as per schedule a sum of Rs. 500/- will be penalised for each complaint for each day. (v) Any delay in non-completion of complaints will be immediately communicated to AGE/JE. (vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against this item shall be made after due verification of complaint register complaint slips by JE & Engr-in-Charge.

Supply only brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified. Make- Hardwyn/ Godrej / Harrison)

Supply only 125 mm brass polished butt hinges type B12 complete all as specified and directed.

Supply only door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each Aluminium extruded section body all as specified Make : Hardwyn/ Godrej/ Plaza

Supply only aluminium alloy body door stopper double 150 mm size complete all as specified and directed.

Supply only aluminium anodized ‘D’ type handles 125 mm complete all as specified and directed.

Supply only 300 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply only 250 mm aluminium alloy, anodised sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

Supply only Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete for glass/ aluminium door as directed by Engr-in- Charge.

Supply only 2 lever brass drawer locks size 65mm complete all as specified and as directed. Make- Plaza/ Godrej/ Harrison

Supply only drawer channel of 300mm length complete all as specified and as directed.

Supply only Brass drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and as directed.

Supply only 15mm bore sensotronic sensor faucet chromium plated swan neck for WHBs complete all as specified and as directed. Make – Jaquar Cat No. SNR-CHR-51011 or equivalent model of Make- Hindware/ Parryware

Supply only chromium plated brass soap dish fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1131N or equivalent model of Marc/ Prayag.

Supply only health faucet with 1m long flexible tube in CP finish & wall hook for EWC complete all as specified and as directed. Make: Jaquar Cat No: ALD-573 or equivalent model of Marc/ Prayag.

Supply only 32mm bore brass chromium plated bottle trap for wash hand basin, sinks, urinals, etc with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as directed.

Supply only chromium plated toilet paper holder brass fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1153N or equivalent model of Marc/Prayag.

Supply only tubular towel rail 20 mm dia 60 cm long of brass chromium plated fixed to wall with brass screw complete all as specified and as directed. Make: Jaquar Cat No: ACN-1111NM or equivalent model of Marc/Prayag.

Supply only PEG Set 6 (Zinc) complete all as specified and directed.

Supply only 15 mm concealed stop valve chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed.

Supply only 32 mm bore waste coupling brass chromium plated for VC sink, VC WHB, VC urinals, steel sinks etc with long screwed shanks and fly nuts, complete all as specified and as directed. Make: Jaquar Cat No: ALD 705 or equivalent model of Parko/ Zim.

Supply only 15 mm bore CP bib cock long nose brass chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed.

Supply only 600mm Long PVC connection suitable for 15mm bore pipes complete all as specified and as directed.

Supply only 15mm CP Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 20 mm CP Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 15 mm bore chromium plated fancy type brass angle valve with elegant knob screwed down high pressure screwed both ends for Iron pipe or for union complete including CP cap all as specified and directed.

Supply only Grating doom 100mm dia of PTMT complete all as specified and directed.

Supply only plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

Supply only CP Jet with 1200 mm CP PVC connection pipe for EWC complete all as specified and as directed.

Supply only 15mm CP cast copper alloy Center Hole Basin Mixer complete all as specified and directed.

Supply only 15mm CP cast copper alloy Wall mixer Telephonic with Crutch with Multi Flow Hand Shower ABS With 1.5 mtr SS Flexibil Tube & Hook complete all as specified and directed.

Supply only Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed.

Supply only 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply only 25 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply only 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

Supply only 25mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

Supply only Corrugated Waste Pipe 32 mm dia for WHB/ Urinal complete all as specified and directed. Make : Prayag Cat No 327.

Supply only Urinal Spreader of CP White colour fixing to 15 mm bore pipe.

Supply only health faucet with 1m long flexible tube in CP finish & wall hook for EWC complete all as specified and as directed. Make: Jaquar Cat No: ALD-573 or equivalent model of Marc/ Prayag.

Supply only 6V Duracell ultra Lithium CR-P2 battery for senser based urinal/ pillar tap complete all as specified & directed.

Supply only 9V Ultralife Lithium battery for senser based urinal/ pillar tap complete all as specified & directed.

M&L for cleaning of manholes/Septic tanks/soakage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge/ silt/ liquid/ mud in foul position and disposing the same out side MD premises as per NGT norms complete all as specified and directed.

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm at any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed. (Note: Maximum of 750 RM will be cleaned in a single working day by the Jetting machine, The cleaned sewage line shall be maintained and keep fully functional by removing any type of blockage, For any damage/casualty occure during working in sewer line or MH or at Other work shall be the responsibility of the contractor and the contractor shall take measures for working in sewer work and water will be provided by contractor complete all as specified and as directed.

Removing spot blockage of WC/ nahani trap/ gully trap including disposal of material obtained from cleaning to a distance complete all as specified and directed.

M/S GEETANJALI ENTERPRISES

MAA SANTOSHI ENTERPRISES

VIJAY KUMAR GUPTA