Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.4 LAccepted-AOC 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹20.0 L+₹57,625 (2.97%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹22.4 L+₹3.0 L (15.6%)Rejected-Finance 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L-3 | Rejected-Finance Higher side quoted amount | |
| 4 | Rejected-Technical KHREW PULWAMA PAMPORE J K PIN 191103 | PULWAMA | JAMMU AND KASHMIR | 191103 | - | Rejected-Technical No in workload |
Tender Value
Refer Docs
EMD Value
₹37,080
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
PROVN OF OVERHEAD SHED AND COVERED PATHWAY BETWEET EDN BR TO GOC, 8 MTN DIV OFFICE AND MED BR TO DY GOC, 8 MTN DIV OFFICE UNDER GE KHUMBATHANG
2022_MES_559263_2
80051/107/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Khumbathang
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹37,080
27 Dec 2022
19 Nov 2022
10 Dec 2022
19 Nov 2022
9 Dec 2022
26 Nov 2022
Amount
Demolation of Brickwork, PCC Block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.
Excavating in post hole (or simlar hole) each not exc 0.5 Cum in hard\dense soil ,getting out returning filling in and remaning earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.
M&L for Cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick rendering in Cement Mortar (1:4) on fair surfaces of brick or concrete work and finished even & fair without using extra cement on walls complete all as specified and directed by Engr-in-Charge.
M&L for precast cement concrete block masonry with solid block exc. 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in Cement Mortar (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for prepration of new plastered surfaces of walls including cornices, pillasters etc. and applying two coat of cement base paint and including one coat of white wash complete all as specified and directed by Engr-in-Charge.
S&F Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. FE 410-W(Gde -E-250) quality A complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of FE 410-W(Gde -E-250) quality A complete all as specified and directed by Engr-in-Charge.
S&F mild steel in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of FE 410-W(Gde -E-250) quality A complete all as specified and directed by Engr-in-Charge.
KASHMIR FAIR DEAL SERVICES
M/S ALI MOHD AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .