SE/GC/TIN/C18/2020-21

Amount

Clearing the light jungle for marking the septic tank area, including cost of all materials, labour, lead, lift etc., complete

Dismanting the existing RR masonary/Brick in cemtent mortar wall with proper shape, clearing away and carefully stacking materials useful for reuse for any thickness wall including labour charges, lead lift, etc., complete

Earthwork excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small size boulders, including cost of lead, lift, labour, etc., complete

PCC 1:4:8 mix using 40mm HBG without form work (machine crushed) metal for foundation concrete including cost of all materials, lead, lift, curing etc., complete.

PCC I:3:6 mix using 20mm HBG without form work (machine crushed metal )for foundation wall including cost of all materials, lead lift, curing, etc., complet

RR Masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of all labour, materials , lead, lift, curing, etc., complete.

Supplying and fabricating and palcing in position fo MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost all materials, lead, lift, cost of binding wire, etc., complete.

Providing shutter for sides of R.C.C/Plane surface, including structing using M.S.Sheets and supported by casurina props complying with standard specification including cost of all materials ,lead, lift, labour, etc., complete.

Columns / Pillair

Pinth beam / lintel / footing

Roof and sunshades

Brickwork in CM 1:5 mix using II class chamber burnt brick of size 9"X4 3/8" x 2 3/4 " including cost of all matrials, labour, lead, lift, curing, etc., complete

RCC 1:1. 5:3 mix using 12mm to 20mm HBS metal for Column/Pillar including cost of all materials, labour, lead. Lift, curing, etc., complete.

Supplying and fixing in position of single leaf 16mm thick plain cement sheet door with required size of aluminium channel with 35x35x5 mm ISA for outer frame including cost of 2ft door flat, necessary fittings, 8" aldrop, bolt & nut , screw, handle including cost of all materials , transporation , lead, lift etc., complete

Supplying and fixing in position of Four / Two part weld - mesh 25 x 25 mmx10 Ga and MS Sheet covered grill window of required size with 35x35x5 mm ISA for outer frame and 25x25x5 mm ISA angle for shutter frame and braced with 20x5mm flat as per specification including cost of all materials, fabrication charges, transporting charges ,lead kift., etc., complete

Plastering with CM 1:5, 12mm thick for all walls and septic Tank including cost of all materials , lead lift, labour, curing, etc., complete.

Plastering with CM 1:3, 12mm thick for ceiling including cost of all materials , lead lift, labour, curing, etc., complete.

Providing projected border of 20cm width for pinth beam and wall including cost of all materials, lead, lift, labour, curing, etc., complete

Supplying and filling of quarry rubbish including cost of labour , materials , lead , lift, labour, curing, etc., complete

Cement mortar floor finishing with CM 1:3, 20mm thick including cost of all materials, labour , T&P, lead, lift, etc., complete.

Paving the approved quality antiskid ceramic tiles of size 305x305x6mm, over a base layer of cement mortar 1:3, 20mm thick and pointing with same coloured cement and finishing the joints including cost of all materials, labour, lead, lift, etc., complete

Dadooing the wall with best approved quality glazed tiles of size 300x200x6mm, over a base layer of cement mortar 1:3, 12 mm thick, pointing with same coloured cement and finishing the joints including cost of all materials, labour, lead, lift etc., complete.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in 25mm dia GI Pipe (class 'B') bend at both ends with necessary angle iron up right and end supports for mains (SD-70)

Supply and laying of 2x2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD .197)

Wring with 2x1.5 sqmm (22/0.3) PVC insulated unsheather SC Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW Switch box with 5A F.T Switch with painting of suitable colour for open pvc light point / fan point (for electronic regulator) (SD-17)

Supply and fixing of 5A 3pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box (SD-133)

Supply and fixing of WT bulk head fitting with quard suitable for incandescent with 60w CFL (SD-84)

Supplying and fixing of 230mm SL brcket with ISI fancy shade approved by Engineer at site with 1 no. 18 W CFL Bulb (SD-82)

Earthing as per P.W.D Standard with an earth electrode of 2 mtr class 'B' GI Pipe of dia not less than 32mm complete with necessary masonry work (SD -234)

Supplying and fixing in position of 15/12mm dia brass screw down bib cock of best quality including cost of materials , lead, lift , labour, etc., complete

Supplying and fixing two side polished 30mm thick cuddappa slab for cupboards including cost of all materials, lead, lift, etc., complete

Supplying and fixing of anodised Aluminium Towel rail 60cm long and 20mm dia with brackets and white porcelain soap dish size 150x150x50mm including cost of all materials, lead, lift, labour, etc., complete

Supplying and fixing in position best quality PVC Soil/Waste pipe 75mm dia. 6kg/cm2 (with ISI monogram) with GI TEE, GT Elbow wherever necessary including cost of all materials, labour, lead, lift, T&P., etc., complete.

Supplying and laying 25mm dia PVC pipe 10Kg /Cm 2 of approved quality and best make including fixing GI Specials, cost of all materials, labour, lead, lift, T&P etc., Complete

Supplying fixing in position Gunmental gate valve of best quality including cost of all material, lead, lift, labour etc., complete.

Providing and fixing sanitary fittings consisting of Oriya pattern water closet single 60cm with P or S trap connecting with PVC ventilating shaft and y bend complete including cost of all materials lead, lift labour, etc., complete

Supplying and fixing in position cast iron Nahini / Floor Trap (100x75mm) with stainless steel grating of approved make and quality and size 100x75mm fixed over a bed of brick jelly lime concrete and finished with CM 1:3, including cost of all materials, labour, lead, lift, T&P etc., Complete.

Supplying and fixing wash basin of size 500x400mm of approved quality including cost of wash basin with pedestal cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waster pipe, CP valve, tap etc., complete and including cost of mirror of size 24"x18" with fibre band.

Supplying and fixing of 110 mm dia PVC pipe including PVC bend Elbow wherever necessary, including cost of all materials labour lead lift etc., complete

Supplying and fixing of 100 mm dia PVC pipe with cowl for ventilating shaft including cost of all materials lead lift labour etc., complets (for septic tank)

Providing inspection chamber of size 0.45x0.45x0.45m to a max depth of 0.60m with CI manhole cover including cost of all materials, labour, lead, lift, etc., complete

Supplying and filing of 40mm HBS metal for dispersion trench as per standard specification including cost of all materials, lead lift, labour, etc., complete.

Precast RCC slab in 1:1.5:3 mix concrete using 12 to 20mm HBS metal for cover slab of septic tank, cable duct cover slab, manhole cover, baffle wall including cost of all material, lead, lift, labour, etc., complete.

Colour washing with two coats of exterior / interior emulsion over a coat of matching wall primer after applying wall putty including cost of all materials, lead, lift, labour, T&P etc., complete

Painting all exposed faces of door, windows with two coats an approved enamel paint over one coat of primer including cost of all materials, lead lift, labour, etc., complete.

GST 12% as per Govt. Norms

PAIMPOZHIL CONSTRUCTION