TENDER/EECD/PWD/FIREFIGHTING

Amount

SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. 200 mm dia (MINIMUM 6 MM THICKHNESS ) (NS)

150 mm dia (NS)

100 mm dia (NS)

80 mm dia (NS)

65 mm dia (NS)

50 mm dia (NS)

40 mm dia (NS)

32 mm dia (NS)

25 mm dia (NS)

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pedant type MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 21.1)

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 1500mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 25.4)

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required. SINGLE HEADED STAINLESS STEEL MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 9.2)

SITC Of Internal Fire Hose Box , Wall Mounting Or Free Standing Type , Made Out Of Fibre Glass Reinforced Plastic Of Approved Colour Of Weather proof hose cabinet of size 750 x 600 x 250mm, to accommoate Two 15 m Length Of Delivery Hoses And A Branch Pipes With Glass Fronted Double Door With Lock And Keys And Break Glass Recess For Keys ,Complete In All Manners . MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS :636 (type-A) as required. Stainless Steel (Grade 304) MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 16.2)

S.S 63 mm dia. short branch pipes with 16 mm dia.Nominal Bore Outlet With Standard Instantaneous Type 63 mm Dia Coupling In All Respects . ISI Marked IS:903 Stainless Steel (Grade 304) MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR -18.2)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30M MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR -17.1)

Supplying and fixing of 4 Way Fire Brigade Connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required. 4 way - 150 mm dia M.S. Pipe MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 19.2)

Supplying and fixing of 2 Way Fire Brigade Connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required . 2 Way - 100 mm dia M.S. Pipe MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 19.1)

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200mm dia MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 15.4)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 20.0)

SITC Of Brass / Bronze Lever Operated Ball Valve Of Full Flow With Stainless Steel Ball ( AISI 304 And Spindle AISI 410 ) With Setting And Gland Of Superior Quality Having Minimum Working Pressure Of 20 Kg /Cm MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS) 25 mm dia

Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. 200 mm dia(DSR - 11.7)

150 mm dia(DSR - 11.6)

100 mm dia(DSR - 11.5)

80 mm dia(DSR - 11.4)

65 mm dia(DSR - 11.3)

50 mm dia(DSR - 11.2)

Providing, installation, testing and commissioning of Non-Return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. 200mm dia(DSR - 14.8)

100 mm dia(DSR - 14.5)

Providing & fixing of Pressure Switch in M.S. pipe line including connection etc. as required. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 22)

SITC of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (For each PUMP ROOM ). MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of fire brigade Draw off connection confirming to IS : 4038-1986 with 150 mm Non return valve/ strainer incluiding necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

Supplying, installation, testing and commissioning of (Diesel Driven Pump 2280LPM) suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal pump of cast ofiron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Description of Item DSR Code No. Description of Item Unit Rate Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, Binstruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Diesel Driven Pump 2280LPM, 56 Mtr Head MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 2.6)

Supplying, installation, testing and commissioning of Main Fire Pump for Hydrant Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required (a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Main Fire Pump for hyd. Discharge: 2280 LPM HEAD -56 Mtr. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 1.6)

Supplying, installation, testing and commissioning of Main Fire Pump for Sprinkler Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required (a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Main Fire Pump for hyd. Discharge: 2280 LPM HEAD -56 Mtr MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 1.6)

Supplying, installation, testing and commissioning of Electric Driven Pressurisation Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads Jockey Pump 180LPM, HEAD -56 Mtr. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. (DSR - 3.3)

Supply, installation, testing and commissioning of Dewatering Pump Submersible type, vertical resting pump for dewatering from Underground sumps/Pits suitable to deliver 120 LPM at 10M head (minimum HP=1 ). 415V, 50Hz, AC supply system, 2900 RPM, including providing required suspension or bracket supports, delivery connections, water proof windings, cable termination box etc suitable for under water application. The pumps shall have self level control including sensing probes or water/weather proof float switch for automatic controls. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. (NS)

SITC of following sizes of 1100 V grade PVC Aluminium armoured cables, PVC insulated PVC sheathed, /supports as per site conditions. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS) 16 x 10 Sq.mm. 4 cour aluminium

Control Cable 2 C x 1.5 sq.mm. copper Urmed

MS Conduet Pipe 25MM. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/ bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves,MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(DSR - 24.3)

SITC OF CO2 type fire extinguisher ISI mark IS code 15683 – 2006 )capacity: 4.5 kg with I mtr long hosepipe. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC OF ABC type fire extinguisher ISI mark IS code 15683 – 2006 capacity: 06 kgs 90 % MAP(Mono Amonium phosphate) pressurized with dry nitrogen. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of Clean Agent type ISI mark IS code 15683 2006 Fire Extinguisher capacity: 2 kg. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of 50 KG DCP (Dry Chemical Powder) Trolley type fire extinguisher as per IS 16018I jet length minimum 8 mtr minimum discharge time 40-50 sec,tested on 30 kgf/cm2. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of 5 kg modular type self operated on 68 temperature Clean Agent type CE certified Fire Extinguisher filled with NAFPIV clean agent gas. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of 50 KG Mechanical Foam AFFF Trolley type fire extinguisher as per IS 16018 jet length minimum 10 mtr minimum discharge time 60-180 sec,tested on 35 kgf/cm2 with 2 kg co2 external fire extinguisher. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

SITC of fire bucket stand having four 9 ltr. Sand filled buckets 4 stand 1 set. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS. (NS)

Likage Water Tank Repaire and painting. MAKE: AS PER LIST ATTACHED IN BID DOCUMENTS.(NS)

Bitureks infra Pvt. Ltd.

FRIENDS FIRE SERVICES

Sukoi Engineers