Providing Stage Lighting, Portable Audio, Stage Furnishing and CCTV System in Auditorium at MRSPTU Bathinda

Providing Stage Lighting System

SITC of 100W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 11˚ / 25˚ / 35˚ Total Power Consumption of 110W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Brand embossed impact on the light body for genuine product. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times/ Sec 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtr above 9066 suitable to illuminate the key presenter or talent on stage. illuminate the key presenter or talent on stage. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Brand embossed impact on the light body for genuine product. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED (LM80 to be provided) DmX 512 dimming with 8 Channel modes CRI & TLCI Value > 95 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 410W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Colour Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colours Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR’s Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Brand embossed impact on the light body for genuine. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady colour No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Brand embossed impact on the light body for genuine product. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Aluminium O Type clamp made up of high grade aluminium having thickness not less than 5mm suitable for round tubes of dimension varying from 40 to 55mm outer daimeter, provided with fixture mounting 25mm M8 bolt and wing nut. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleeve on the rope. Carabiner Clip. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Fixed stage Lighting bar/winch of 15Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Fixed FOH Lighting bar/winch of 16Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Power Distribution Electrical panel having a Incomer of 63A. Floor mount / rack mount / wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures. Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal. Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius. Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an minimum sheet thickness 1.8mm thickness sheet to hold the structure. Neutral separation made using incomer, Voltmeter, Ammeter display for reading visualization Individual MCB control for 24 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables. Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminium/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivory connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing.Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x150 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of DmX Male Female Connectors 5 Pin having rubber sheath protection for Cross connecting DmX wiring connections. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal defaming. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader. 12 Set Scene saving options Master Fader Enabled Controller LCD display Smooth movement faders 12 Physical Fader unit for direct access Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 3Core

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed)

MINIATURE CIRCUIT BREAKERS:

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 40amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 12 way each

Providing Portable Audio System

SITC of ACTIVE COLUMN ARRAY SPEAKER: High Performance Portable 1250W RMS/5000W peak15" active column array system, 1x15" LF, 12 x 3" Neodymium full range drivers, 2" HF Driver x 1 , Frequency Response - Frequency Response , Max SPL - 134dB, Coverage (H x V) -120° x 40°, DSP with multiple presets available, Mic/Line/RCA input + Bluetooth inbuilt,frequency response: 50Hz-20KHz, sensitivity: 96dB, rugged plywood construction with Polyurea paint, lightweight 26 Kg.

SITC of WIRED VOCAL MIC:- Dynamic Vocal Microphone, polar pattern Super cardioid, Frequency Response 50 –15,000 Hz, Sensitivity –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL, Impedance 600 ohms.

SITC of 2 core Microphone cable for microphone as per specifications complete in all respects as approved and desired by the Engineer-in-charge at site

SITC of all required Speakon & XLR connectors as per specifications complete in all respects as approved and desired by the Engineer-in-charge at site.

Providing Stage Furnishing System

SITC of suspention support on Stage for suspending bars and curtains and other stage accessories made from MS 45mmx45mmx5mm MS angle/ MS Tube supported/suspended from Ceiling using 35x5 and 12mm Rod complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of velvet/mossi/satan /crep curtain 350 gsm cloth with horizontal sliding arrangement complete with galvanized, passivized modular curtain rails, mounting brackets, suitable for sliding arrangement &motorized operation complete with: single trolley, master trolley, tension and diverter pullies, 3mm steel wire rope, 1 HP motor Crompton/Siemens/Havells), two nos. Micro switches for auto stop. The curtain should be draped to half area when in closed position. Minimum overlap at center should be 900mm and should be stitched in double gathering of SIZE -16mtr.x 5 mtr. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of glazed cotton /satan cloth 350gsm with horizontal sliding arrangement complete with galvanized and passivized modular curtain rails 1 mtr. long, mounting brackets, sliding arrangement &motorized operation complete with: single trolley, master trolley, tension and diverter pullies, 3mm steel wire rope, 1HP motor Crompton/Siemens/Havells), two nos. Micro switches for auto stop. Minimum overlap at center should be 600mm and should be stitched in double gathering of SIZE -17mtr.x 5 mtr.. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 25MMX50MMX1.6MM rectangular tube and 6mm wood ply fixed on frame and after black glazed cotton cloth fixed , hang from ceiling by M S Pipe frame Size 1.2 M X5Ms. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC OF Suspended from 25 0D MS Pipe. Main and Rear Frill to be made out of thesame Fabric as that of Main Curtain. Frills shall be pleated and stitched in double gathering. Frills to be 600 mm below the proscenium. Approximate Size : 16Mx1.2m.. complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of Stage hoisting and curtain Control system Panel, comprising of Electrical Contractor and protection MCB’s for dual control of main, rear motor, Controls for forward revers movement of Panel should have incoming protection 4 pole MCB, phase indicating pilot lights, etc. It is to be fabricated from 1.6mm sheet steel, wall mounting type, cable entry from top and/ or bottom etc. Complete with Remote Control complete in all respects as approved and desired by the Engineer-in-charge at site.

SITC of 1.5 sqmm 4 core shilded wire. complete in all respects as approved and desired by the Engineer-in-charge at site.

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Providing CCTV System

Supply, Installation, Testing & commissioning of STQC compliant minimum 4 MP fixed turret network camera 1/3-inch Progressive Scan CMOS, Smart Dual Light technology (combining IR and white light) provides an effective range of up to 30meters, Efficient H.265+ compression technology, also supporting H.265, H.264, and H.264+, Wired, with one RJ45 10M/100M self-adaptive Ethernet port; supports Power over Ethernet (POE). complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing & commissioning of STQC compliant minimum 4MP Outdoor Network IR Bullet Camera Supports 1/3-inch Progressive Scan CMOS, Smart Dual Light technology (combining IR and white light) provides an effective range of up to 30meters, Efficient H.265+ compression technology, also supporting H.265, H.264, and H.264+, Wired, with one RJ45 10M/100M self-adaptive Ethernet port; supports Power over Ethernet (POE). complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing & commissioning of 16-channel, 4K network video recorder (NVR) that supports up to 8MP resolution for live view, recording, and playback. H.265+/H.265/H.264+/H.264 video compression, 160 Mbps incoming bandwidth, and 80 Mbps outgoing bandwidth. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply Installation Testing and Commissioning of16 Port POE switch. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing and Commissioning of 9U Wall mount 19’’ Rack with glass door, lock & key facility 450mm-550mm depth with CPD, Cable Manager & Fan. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing and Commissioning of 8 TB Surveillance Internal Hard Drive HDD 3.5 inches SATA 6 Gb/s 256 MB Cache for DVR NVR Security Camera System with Drive Health Management. Built-in RV sensors allow drives to maintain performance in multi-bay systems. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing and Commissioning of PVC 5*5’ CCTV Box/Junction Box providing great value for your camera system needs. IP54 protection ensures that your connections remain safe even in challenging outdoor conditions. complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, Installation, Testing and commissioning of 4K 43 inch ,Smart UHD Professional Displays 440 nits Brightness, Smart Android OS, 4K UHD Resolution, 24*7, Screen Mirroring through Airplay /Chromecast, Direct LED, 16 Gb storage,Wi-Fi Direct, Wi-Fi Certified & Wireless LAN, 178 Degree Viewing Angle, Landscape/ Portrait/ Tilt Installation, IP/RS232C Control, 10W+10W Speakers, HDMI 2.1 (4), USB (2), Power Scheduling, Color Gamut (DCI-P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1,4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10 /HLG /Dolby Vision with wall mounted tiltable stand complete in all respects as approved and desired by the Engineer-in-charge at site.

Supply, lnstallation, Testing and Commissioning of lKvA offline UpS 1000 / 0.6 Capacity (VA), 100-300VAC lnput Voltage, 200-245V output Voltage AVR Mode 2 Nos. or higher PC Support 2xI2Yl7AH with 20-30 Min Backup lnternal Battery Low Battery, Overload, Short Circuit and Fauh Conditions Audible Alarms complete in all respects as approved and desired by the Engineer-in-charge at site.

COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES:

Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

CAT 6 LAN cable

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Please Enable Macros to View BoQ information