REPAIR AND MAINT OF STREET LIGHT AT CERTAIN AREA UNDER GE (A) JAISALMER

Taking down unservicable street light/ flood light/ solar light/post top lantern fitting of any size /type/capacity any Watt from height of pole/walls/for repair work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as specified and directed by Engineer-in-Charge:- Note :- (a) Spares like LED Driver,surge protector ,service wire etc. shall be measured and paid as separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder & other T&P required etc shall be arranged by the contractor without any extra cost. (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts, cirle clips, clamps etc required if any at site.

S&F in repair of electronic driver for LED light fitting, LED out put power 30 watt, input voltage range : 170 - 300 volt AC , out put voltage DC as per make/ model range: 24 volt to 110 volt, make as per site requirement complete all as specified and directed by Engineer-in-Charge.

All as per item No. 2.00 here-in-before above but capacity 45 watt

All as per item No. 2.00 here-in-before above but capacity 60 watt

All as per item No. 2.00 here-in-before above but capacity 70 watt

All as per item No. 2.00 here-in-before above but capacity 90 watt

All as per item No. 2.00 here-in-before above but capacity 200 watt

All as per item No. 2.00 here-in-before above but capacity 250 watt

All as per item No. 2.00 here-in-before above but capacity 400 watt

S&F in repair Surge Protector 10KV for street light fitting, Normal voltage input range : 170- 300 volt complete all as specified and directed by Engineer-in-Charge.

Labour only for making serviceable street/security lights/solar light unserviceable placed at pole by disconnection / Isolating power supply either from pole junction box or by disconnecting overhead jumpers and carrying out de-carbonization / de-sulphation at connection points with overhead conductor / light fitting / junction box terminal including replacement connection wire complete all as specified and directed by Engineer-in-Charge. Note : - Cable shall be measured and paid seprately under relevant items.

S&F LED street light of capacity 60 Watt, Including making electrical connection to the fitting with suitable size of wire,Having Pressure Die Cast Aluminium Housing, Ip-66 Having Efficiency Of ≥ 110 Lumens/Watt with toughend glass , Operating Voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver Also. The Fitting Must Be Suitable For 35 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ) Including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable With Suitable Size, Mounting Pipe/Bracket , Nut, Bolts And Accessories Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. complete all as specified and directed by Engineer-in-Charge

S&F LED street light of capacity 45 Watt, Including making electrical connection to the fitting with suitable size of wire,Having Pressure Die Cast Aluminium Housing, Ip-66 Having Efficiency Of ≥ 110 Lumens/Watt, Operating Voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver Also. The Fitting Must Be Suitable For 35 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ) Including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable With Suitable Size, Mounting Pipe/Bracket , Nut, bolts and accessories including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. complete all as specified and directed by Engineer-in-Charge.

S&F LED street light of capacity 90 Watt, Including making electrical connection to the fitting with suitable size of wire,Having Pressure Die Cast Aluminium Housing, Ip-66 Having Efficiency Of ≥ 110 Lumens/Watt with toughend glass , Operating Voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver Also. The Fitting Must Be Suitable For 35 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ) including Connecting Up With Three Core Twisted Flexible Copper Conductor Cable With Suitable Size, Mounting Pipe/Bracket , Nut, bolts and accessories including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. complete all as specified and directed by Engineer-in-Charge.

S&F LED flood light fitting 250 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver. Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. including making Connection With 3 Core X Frlsh Wire, All As Per Directed By Eic As complete all as specified and directed by Engineer-in-Charge.

S&F LED flood light fitting 200 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver. Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X Frlsh Wire, All As Per Directed By Eic As complete all as specified and directed by Engineer-in-Charge.

S&F LED flood light fitting 400 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 48,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95, , Cct – 5700k, Of Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Seperate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver. Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X Frlsh Wire, All As Per Directed By Eiccomplete all as specified and directed by Engineer-in-Charge.

S&Fg in replacement of PVC insulated, sheathed weather proof, copper conductor of size 1.5 sqmm, 3 core complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of PVC insulated, sheathed weather proof, aluminium conductor of size 6 sqmm, 2 core complete all as specified and directed by Engineer-in-Charge.

M&L for in replacement of PVC conduit 20 mm, heavy duty rigid non metallic including of all tee, bends, elbows etc complete all as specified and directed by Engineer-in-Charge.

Supply & erect minimum 9 mtr height above GL Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) and including one coat of red oxide primer and two coat of aluminium paint over a pole including dismantlaing/taking out existing PCC/Steel tubular pole and making surface good complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of PCC pole /stay assembly including necessary form work up to groud level complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Taking out UG LT cable of any size/any core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, test and commissioning in repair of LT UG, XLPE insulated, heavy duty, 1100V grade of electric cable size 50 Sqmm 3.5 core with aluminium conductor, served with an inner sheathing of PVC tape armoured eith galvanized steel wire or tape and overall PVC sheathed,laid in trench or passing through pipe, making all connection with and including provision of necessary glands, lugs, bushing etc as required complete all as specified and directed by Engineer-in-Charge. Note: Earthwork excavation sand cushioning ,Jodhpur stone patti, GI protcetion pipe shall be measured and paid separately in their respective items.

All as item No. 26.00 here-in-before above but size 10 Sqmm 2 core

All as item No. 26.00 here-in-before above but size 10 Sqmm 4core

All as item No. 26.00 here-in-before above but size 16 Sqmm 4core

All as item No. 26.00 here-in-before above but size 25 Sqmm 4core

All as item No. 26.00 here-in-before above but size 35 Sqmm 3.5 core

All as item No. 26.00 here-in-before above but size 70 Sqmm 3.5 core

All as item No. 26.00 here-in-before above but size 95 Sqmm 3.5 core

M&L for in repair 32 mm dia HDPE DWC pipe ISI marked fixed on walls, ceiing, in floor, trenches etc for laying of cable protection complete all as specified and directed by Engineer-in-Charge.

All as item No. 34.00 here-in-before above but size 40 mm dia

All as item No. 34.00 here-in-before above but size 50 mm dia

All as per item No. 26.00 here-in-before above but Re-laying/re-fixing of XLPE insulated , Armoured , Electric Power UG Cable (Heavy Duty), 1100 Volt Grade of any Cross sectional area obtained against Serial item No. 25.0 above etc complete all as specified and as specified and directed by Engineer -in- Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or soil for shaft walls, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated Material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point of soft/loose soil complete all as specified and directed by Engineer-in-Charge.

N
Supplying and laying reinforced precast concrete cable cover, Class LV, Type-I, flat, size 250 mm x 150mm x 40mm

M&L for sand cushioning with layers of sand 8 cm before laying of cable & 15 cm after laying of cable (total 23 cm ) in trenches, duly punning to a thickness of 18 cm for cable protection complete all as specified and directed by Engineer-in-Charge. Note:- Thickness after punning shall be measured for payment.

S&F in repair 40 mm bore GI tubing light grade in trenches or on pole for cable protection complete all as specified and directed by Engineer-in-Charge.

S&F in repair 50 mm bore GI tubing medium grade in trenches or on pole for cable protection complete all as specified and directed by Engineer-in-Charge.

S&F of pole mounted junction box of outer size 300x200x120mm made out of FRP body (hot mulded type) with IP-66 protection and locking with screws alongwith 6 Amp rating MCB SP-01 No, up to 50 Amp rated 4 pole connector suitable to insert the cable size up to 25 sqmm x 4 core -02 No and din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FI clamps with nut bolts of suitable size on steel tubular pole/PCC/RCC pole including cable glands, aluminum lugs/thimbles for incoming and out going cables and complete all as specified and directed by Engineer-in-Charge.

S&F in repair, galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with applying two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings complete all as specified and directed by Engineer-in-Charge.

S&F MCB, single pole, 16-32 Amp, 240 Volts, 'C' Curve 10KA including dismantling old unserviceable MCB complete all as specified and directed by Engineer-in-Charge.

S&F MCB, SPN, 32 Amp, 240 Volts, 'C' Curve 10KA including dismantling old unserviceable MCB complete all as specified and directed by Engineer-in-Charge.

S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB/ Panel box/ feeder piller box complete with connection testing and commissioning.MCB, TPN 40 Amp, including dismantling old unserviceable MCB complete all as specified and directed by Engineer-in-Charge.

S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB/ Panel box/ feeder piller box complete with connection testing and commissioning.MCB, TPN 63 Amp, including dismantling old unserviceable MCB complete all as specified and directed by Engineer-in-Charge.

S&F MCCB 415V, 3 phase 50 HZ 4 pole 100 Amps breaking capacity 16 KA (Ics = 100% Icu) with including dismantling old unserviceable MCCB one connection link on LT panel /fedder piller complete all as specified and directed by Engineer-in-Charge.

S&F MCCB 415V, 3 phase 50 HZ 4 pole 125 Amps breaking capacity 16 KA (Ics = 100% Icu). with including dismantling old unserviceable MCCB one connection link on LT panel /fedder piller complete all as specified and directed by Engineer-in-Charge.

M&L for straight through(Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10/16 SQmm including dismantling of the old burnt cable joint termination complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surface of LT Concrete electric pole of any size by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior, synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height 1.5 mtr above the ground level, including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and 235 writing of identification Nos with proper stencil cut etc as per directions by complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior, synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by complete all as specified and directed by Engineer-in-Charge.

S&F Din type HRC fuse link of Required rating 32A/63A/100A Suitable for HG type 20H/2 ccomplete all as specified and directed by Engineer-in-Charge. Make :- Seimens/L&T/Havells as approved by GE.

S&F street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel shuld be suitable enough to take 3 Phase load of 12 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable 3 Nos power Contractors and 03 Nos incoming MCB's 40 Amp & 3 Nos outgoing MCB's of 32 Amp each & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option) and including taking down old unserviceable nature switch one complete all as specified and directed by Engineer-in-Charge.

S&F street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel shuld be suitable enough to take 3 Phase load of 8 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable 3 Nos power Contractors and 03 Nos incoming MCB's 32 Amp & 3 Nos outgoing MCB's of 32 Amp each & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option) and including taking down old unserviceable nature switch one complete all as specified and directed by Engineer-in-Charge.

S&F in repairs nature switch ( using infrared sensor technology ) based automatic street light control panel. The panel should be enough to take three phase load of 25 kw.Nature switch operation should be based on natural light luxes. required illuminance level switching ON is <=60 and for Switching OFF >=10 lux. the senser should be have a part night operation facility of min 4HRS to max 12 hrs . the senser along with suitable 3 phase load of 25 KW with 3 nos contractor ,3 nos Incoming MCBs of 63 Amps and outgoing MCBs of 63 Amp and circuit wire copper of min 16 Sqmm and should be enclosed in a pole /wall mountig Rust proof, Electric shock proof,Termite proof and FR grade thermoplastic polycarbonate enclouser (with hinged lid) conforming to IP-66 protection.The circuit should also have provision gor Manual or Auto operation complete all as specified and directed by Engineer-in-Charge.

S&F MNX Power contactor suitable for power supply 40 Amps 4 pole 4 NO Contactor including making electrical connection to the contactor complete all as specified and directed by Engineer-in-Charge. Make : Legrand or equivalent make of Havells/L&T as approved by GE.

Supply & fix MNX Power contactor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor complete all as specified and directed by Engineer-in-Charge. Make : Legrand or equivalent make of Havells/L&T as approved by GE.

S&F in repair Digital Astronomical timer switch 240V AC-2W,C/O, Base/DIN type complete for switching of contactors complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting the road / hard standings and excavating in trenches not exceding 0.40 mtr wide and not exc 0.80 mtr deep across the road for laying cable including making good the excavated portion by means of PCC 1:2:4, type B1 using 20mm graded stone aggregate complete and matching with the surroundings complete all as specified and directed by Engineer-in-Charge.

S& F in repair Lithium based energy efficient Integrated solar street light of 20 watt in single body with FRP/Aluiminum duly polyurenthane coating encases with monocrystalline solar PV panel of 30/35Wp, Lithium battery 11.1/12.8 Volt, 24 Ah with inbuit BMS, IP 65/66, High brightness W-LED (120-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc including dismantling and/taking down old unserviceable solar street light one complete all as specified and directed by Engineer-in-Charge. Note:- (i) Short Circuit, overload, reverse polarity and battery protections to be provided. (ii) OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint.

Taking down and dismantling existing high mast pole of height 12 to 20 mtr from bottom plate, nuts bolts, gear box and head frame for dismantling the unserviceable parts including repair control panel wiring, old unsv lights, complete with the help of suitable T&P required for holding, lifgting the pole, replacement of unservicable part, oiling and greasing, of pulleys, gear box, rope and all moving parts including assembling, installation of high mast pole complete all as specified and directed by Engineer-in-Charge. Note:- 1. cost of crane for dismantling high mast pole is deemed to be included in quoted rate. 2. Cost of oling and greasing of moving parts is deemed to be quoted rate.

Taking down by disconnected the existing electrical connection of winch motor for rewinding /repairs including rewinding the mortor of capacity up to 2 HP with best class supper enameled copper wire of existing guage and size including varnishes and insulating 230 V AC 50 HZ electric supply system . refixing and reconnected it to the original location for satisfactory functioning of wintch on 230 v electric supply system complete all as specified and directed by Engineer-in-Charge.

S&F in repair of of PIR Motion Sensor 170uA for 12 to 40 watt Solar Light Standard Detection 5m Lens Color : White complete all as specified and directed by Engineer-in-Charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 12-20 Ah (Suitable for 12 watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 12 watt Integrated Solar Lights complete all as specified and directed by Engineer-in-Charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 36 Ah (Suitable for 16 watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 20 watt to 30 watt watt Integrated Solar Lights complete all as specified and directed by Engineer-in-Charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 42 Ah (Suitable for 20 watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 40 watt Integrated Solar Lights complete all as specified and directed by Engineer-in-Charge.

S&F in reapir of rocker switch 6 to 10Amp for solar lights complete all as specified and directed by Engineer-in-Charge.

S&F Lead acid battery 12 V, 40 AH with controller suitable for solar lighting system and including taking down old unserviceable battery complete all as specified and directed by Engineer-in-Charge.

S&F of 1.1 KV LT cable route indicator /marker of MS plate 15 CM dia and 10 mm thick and 60 cm long, 45 cm ground in PCC and 15 cm above the ground level of MS angle of 50x50x6 mm with the logo at the centre "LT CABLE GE (A) JSLR" complete with PCC as required qty complete all as specified and directed by Engineer-in-Charge.

S&F in repair contactors of capacity 40-63 A 3 Pole 415 V with 2NO+2NC complete all as specified and directed by Engineer-in-Charge.

S&F in repair NO/NC auxillary contacts of capacity 40A of 415 V complete all as specified and directed by Engineer-in-Charge.

S&F fabricate structural mild steel RS joist, channel angle iron, flat iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clamps, eye hook and back plate etc fabricated from structural steel section including nuts, bolts, washers, welding (cold and hot ) drilling holes for bolts, bend to any shape or size as indicated and directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

GENERAL NOTES:- (a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint throughout jaisalmer cantt area. (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint. if not, Contractor shall have to bear a penalty of Rs. 50.00 per complaint or maximum of Rs 500 per day on this account (c) Complaints has to attend and rectify the complaint/defect irrespective of no of trips/Complaints as alloted by Eng-in-Charge.(d) Complaint should be attend in Night also Note : Contractor has to arrange telescopic boom lift for maintenance at height of 15m at his own cost. No extra payment will be paid by department.