Loading
Loading…
Loading…
Tender Value
₹1.4 L
EMD Value
₹1.4 L
Closing Date
22 Jul 2026, 6:00 pmClosed
CWE Karanja
CWE KARANJA NAVAL STATION KARANJA
COMPREHENSIVE MAINT OF BR AND EM WORKS LIKE REPAIR REPLACEMENT MAINT OF LT UG CABLES MCCBS LT OUTDOOR INDOOR PANELS CHANGE OVER SWITCH AND CONNECTED MISC WORKS IN TUNIR ABHIMANYU AND OTM AREA AT NAVAL STATION KARANJA
2026_MES_774480_1
84552-K/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Naval Station Karanja
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
₹1.4 L
Yes
29 Jun 2026
24 Jun 2026
24 Jul 2026
24 Jun 2026
22 Jul 2026
15 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided incl doors, gates for complete all as specified and as directed | 2.11 | Qtl. | - | - |
| 2 | Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in in concrete, brick work, masonry work, etc. ) | 85 | RM | - | - |
| 3 | Dismantling fencing wire mesh any type complete all as specified and as directed | 153 | Sqm | - | - |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. | 3.24 | Cum | - | - |
| 5 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil complete all as specified and directed | 30 | Each | - | - |
| 6 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire mesh, etc.; flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed | 568.71 | Kg | - | - |
| 7 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but, length of boltexc 5cm but n exc 10cmlong.(Diameter of neck in 11 to 15 mm) complete all as specified and directed | 15 | Kg | - | - |
| 8 | S&F mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed. | 210.8 | Kg | - | - |
| 9 | Matrial and Labour for preparation of new steel surfaces any description nexc 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. | 34 | 10 RM | - | - |
| 10 | Matrial and Labour Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and as directed. | 30.6 | Sqm | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.18 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tenderpages.pdf
Tender Documents • 1.06 MB
SOC.pdf
Additional Documents • 0.11 MB
BOQ_867244.xls
BOQ • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .