Item Rate Annual Tender for Supply of pipe material and Maintenance for chakan Municipal Council Tal Khed Dist Pune

Amount

Excavation for foundation / pipe trenches inearth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift 0 to 1.5 M DSR 2021.22

Excavation for foundation / pipe trenches in hardmurum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)Lift 0 to 1.5 M DSR 2021.22

Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated aterial upto a distance of 50 M beyond the area and lifts as elow, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259)Lift 0 to 1.5 M DSR 2021.22

Add for every additional lift of 1.5 M beyond initial lift of 1.5 M for Item Nos. 1 to 3 DSR 2021.22

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-Lift 0 to 1.5 M DSR 2021.22

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A- Lift 0 to 1.5 M DSR 2021.22

Excavation for foundation / pipe trenches inhard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 0 to 1.5 M DSR 2021.22

Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall be paid separately.Lift 0 to 1.5 M

Add for every additional lift beyond initial liftof 1.5 M for Item Nos. 5 to 10 DSR 2021.22

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation,surcharging, etc. complete.

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering andcompaction, etc. complete. (Bd-A-10/263)

Filling in plinth and floors / trenches withcontractor's murum for bedding in 15 cm to20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)

Plain cement concrete in PCC M-100

Plain cement concrete in PCC M-150

Plain cement concrete in PCC M-150

Plain cement concrete in PCC M-200

Provinding and making UPVC/MDPE pipe consumer service connection with all material and labour with road crossing 15 mm

Double flanged M S specials

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. a)80 mm

Providing D.I. pipes K-7 Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. 100mm

Providing D.I. pipes K-9 Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. 100mm

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. a) 80 to 300 mm dia.

b) 350 mm & above dia.

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.Without Rubber Rings 80 mm.

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.With Rubber Rings 80 mm.

Providing and supplying in Working Pressure 4 Kg./Sq.cm standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 63 mm.

Working Pressure 6 Kg. / Sq.cm 63 mm.

Lowering laying and jointing of in Working Pressure 4 Kg./Sq.cm standard lengths ISI mark rigid unplasticised PVC pipes. 63 mm.

Working Pressure 6 Kg. / Sq.cm 63 mm.

Hydraulic testing of PVC pipe a) Working Pressure 4 Kg/Sq.cm line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm.

b) Working Pressure 6 to 12.5 Kg./Sq.cm. 63 mm.

Providing ISI mark G.I. pipe medium duty of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below15 mm. ( 1.23 kg./m )

20 mm. ( 1.59 kg./m )

25 mm. ( 2.40 kg./m )

32 mm. ( 3.17 kg./m )

40 mm. ( 3.65 kg./m )

50 mm. ( 5.16 kg./m )

65 mm. ( 6.63 kg./m )

80 mm. ( 8.64 kg./m )

100 mm. ( 12.40 kg./m )

125 mm ( 16.70 kg/m )

150 mm.( 19.70 kg./m )

Providing ISI mark G.I. pipe Heavy of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below15 mm. ( 1.46 kg./m )

20 mm. ( 1.91 kg./m )

25 mm. ( 2.99 kg./m )

32 mm. ( 3.97 kg./m )

40 mm. ( 4.47 kg./m )

50 mm. ( 6.24 kg./m )

65 mm. ( 8.02 kg./m )

80 mm. ( 10.30 kg./m )

100 mm. ( 14.70 kg./m )

125 mm ( 18.30 kg/m )

150 mm ( 21.80 kg./m )

Lowering laying and jointing of G.I. pipe medium duty of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below15 mm. ( 1.23 kg./m )

20 mm. ( 1.59 kg./m )

25 mm. ( 2.40 kg./m )

32 mm. ( 3.17 kg./m )

40 mm. ( 3.65 kg./m )

50 mm. ( 5.16 kg./m )

65 mm. ( 6.63 kg./m )

80 mm. ( 8.64 kg./m )

100 mm. ( 12.40 kg./m )

125 mm ( 16.70 kg/m )

150 mm.( 19.70 kg./m )

Lowering laying and jointing of G.I. pipe Heavy of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below15 mm. ( 1.46 kg./m )

20 mm. ( 1.91 kg./m )

25 mm. ( 2.99 kg./m )

32 mm. ( 3.97 kg./m )

40 mm. ( 4.47 kg./m )

50 mm. ( 6.24 kg./m )

65 mm. ( 8.02 kg./m )

80 mm. ( 10.30 kg./m )

100 mm. ( 14.70 kg./m )

125 mm ( 18.30 kg/m )

150 mm ( 21.80 kg./m )

MEDIUMHydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion 15 mm. ( 1.23 kg./m )

20 mm. ( 1.59 kg./m )

25 mm. ( 2.40 kg./m )

32 mm. ( 3.17 kg./m )

40 mm. ( 3.65 kg./m )

50 mm. ( 5.16 kg./m )

65 mm. ( 6.63 kg./m )

80 mm. ( 8.64 kg./m )

100 mm. ( 12.40 kg./m )

125 mm ( 16.70 kg/m )

150 mm.( 19.70 kg./m )

HEAVY Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion 15 mm. ( 1.46 kg./m )

20 mm. ( 1.91 kg./m )

25 mm. ( 2.99 kg./m )

32 mm. ( 3.97 kg./m )

40 mm. ( 4.47 kg./m )

50 mm. ( 6.24 kg./m )

65 mm. ( 8.02 kg./m )

80 mm. ( 10.30 kg./m )

100 mm. ( 14.70 kg./m )

125 mm ( 18.30 kg/m )

150 mm ( 21.80 kg./m )

Blank Flange -PN-1 D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect et 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Double Flange Bend 90 Deg -PN-‘10 D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect et 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

All Flange Tee -PN-10 D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect et 80 x 80 mm dia

100 x 80 mm dia

100 x 100 mm dia

150 x 80 mm dia

150 x 100 mm dia

150 x 150 mm dia

200 x 80 mm dia

200 x 100 mm dia

200 x 150 mm dia

Providing and supplying MJ Collar/Coupling D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Double Socket Bend 90 degree Providing and supplying MJ Collar/Coupling D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

All Socket Tee Providing and supplying D.I. fittings with ISI markMechanical joint confirming to tables 12 to table 31 of IS9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete 80 x 80 mm dia

100 x 80 mm dia

100 x 100 mm dia

150 x 80 mm dia

150 x 100 mm dia

150 x 150 mm dia

200 x 80 mm dia

200 x 100 mm dia

200 x 150 mm dia

200 x 200 mm dia

250 x 80 mm dia

250 x 100 mm dia

250 x 150 mm dia

250 x 200 mm dia

250 x 250 mm dia

H. D. P. E. PIPES Providing PE-100 a) 6 Kg/Sq. cm : and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 63 mm

8 Kg/Sq. cm :H. D. P. E. PIPES Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 63 mm

10 Kg/Sq. cm :H. D. P. E. PIPES Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 63 mm

12.5 Kg/Sq. cm :H. D. P. E. PIPES Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 63 mm

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II For all classes. 20 mm

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

63 mm dia

75 mm dia

90 mm dia

110 mm dia

125 mm dia

140 mm dia

160 mm dia

180 mm dia

200 mm dia

Providing & Supply of Electro Fusion Fittings/couplers in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Couplers 20

Couplers 25

Couplers 32

Couplers 40

Couplers 50

Couplers 63

Couplers 75

Couplers 90

Couplers 110

Couplers 125

Couplers 140

Couplers 160

Couplers 180

Couplers 200

Equal Tee Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Equal Tee 20

Equal Tee 25

Equal Tee 32

Equal Tee 40

Equal Tee 50

Equal Tee 63

Equal Tee 75

Equal Tee 90

Equal Tee 110

Equal Tee 125

Equal Tee 160

Equal Tee 180

Equal Tee 200

Elbow 90 Deg. Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Elbow 90 Deg. 20

Elbow 90 Deg. 25

Elbow 90 Deg. 32

Elbow 90 Deg. 40

Elbow 90 Deg. 50

Elbow 90 Deg. 63

Elbow 90 Deg. 75

Elbow 90 Deg. 90

Elbow 90 Deg. 110

Elbow 90 Deg. 125

Elbow 90 Deg. 160

Elbow 90 Deg. 180

Elbow 90 Deg. 200

Elbow 45 Deg. Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Elbow 45 Deg. 32

Elbow 45 Deg. 40

Elbow 45 Deg. 50

Elbow 45 Deg. 63

Elbow 45 Deg. 75

Elbow 45 Deg. 90

Elbow 45 Deg. 110

Elbow 45 Deg. 125

Elbow 45 Deg. 160

Elbow 45 Deg. 180

Elbow 45 Deg. 200

Reducer Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Reducer 25X20

Reducer 32X20

Reducer 32X25

Reducer 40X32

Reducer 50X32

Reducer 50X40

Reducer 63X32

Reducer 63X40

Reducer 63X50

Reducer 75 x 63

Reducer 90X63

Reducer 90X75

Reducer 110X50

Reducer 110X63

Reducer 110X75

Reducer 110X90

Reducer 125X90

Reducer 160X90

Reducer 160X110

Reducer 180X125

End Cap Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. End Cap 20

End Cap 25

End Cap 32

End Cap 40

End Cap 50

End Cap 63

End Cap 75

End Cap 90

End Cap 110

End Cap 125

End Cap 140

End Cap 160

End Cap 180

End Cap 200

Ferrule Tapping Tee Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Ferrule tapping tee 63 x 1/2"

Ferrule tapping tee 63 x 3/4"

Ferrule tapping tee 63 x 1"

Ferrule tapping tee 75 x 1/2"

Ferrule tapping tee 75 x 3/4"

Ferrule tapping tee 75 x 1"

Ferrule tapping tee 90 x 1/2"

Ferrule tapping tee 90 x 3/4"

Ferrule tapping tee 90 x 1"

Ferrule tapping tee 90 x 1%"

Ferrule tapping tee 90 x 1^"

Ferrule tapping tee 90 x 2"

Ferrule tapping tee 110 x 1/2"

Ferrule tapping tee 110 x 3/4"

Ferrule tapping tee 110 x 1"

Ferrule tapping tee 110 x 1 %"

Ferrule tapping tee 100 x 1^"

Ferrule tapping tee 110 x 2"

Ferrule tapping tee 160 x 1/2"

Ferrule tapping tee 160 x 3/4"

Ferrule tapping tee 160 x 1 "

Ferrule tapping tee 160 x 1%"

Ferrule tapping tee 160 x 1^"

Ferrule tapping tee 160 x 2"

Electrofusion Reducing Tee Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Reducing Tee 32 x 32 x 20

Reducing Tee 32 x 32 x 25

Reducing Tee 40 x 40 x 20

Reducing Tee 40 x 40 x 25

Reducing Tee 40 x 40 x 32

Reducing Tee 50 x 50 x 20

Reducing Tee 50 x 50 x 25

Reducing Tee 50 x 50 x 32

Reducing Tee 50 x 50 x 40

Reducing Tee 63 x 63 x 20

Reducing Tee 63 x 63 x 25

Reducing Tee 63 x 63 x 32

Reducing Tee 63 x 63 x 40

Reducing Tee 63 x 63 x 50

Reducing Tee 75 x 75 x 40

Reducing Tee 75 x 75 x 50

Reducing Tee 75 x 75 x 63

Reducing Tee 90 x 90 x 50

Reducing Tee 90 x 90 x 63

Reducing Tee 90 x 90 x 75

Reducing Tee 110 x 110 x 50

Reducing Tee 110 x 110 x 63

Reducing Tee 110 x 110 x 75

Reducing Tee 110 x 110 x 90

Reducing Tee 125 x 125 x 63

Reducing Tee 125 x 125 x 75

Reducing Tee 125 x 125 x 90

Reducing Tee 125 x 125 x 110

Reducing Tee 160 x 160 x 50

Reducing Tee 160 x 160 x 63

Reducing Tee 160 x 160 x 75

Reducing Tee 160 x 160 x 90

Reducing Tee 160 x 160 x 110

Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. LNPE 63

Sluice valves - PN -1 (Without by pass)Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm.

Sluice valves - PN -1.0 (With by pass arrangement)Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm.

Sluice valve - PN - 1.6 (Without by pass arrangement)Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete 50 mm..

Sluice valve - PN - 1.6 (With by pass arrangement)Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.50 mm.

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete12/15 mm.

Air Valve Single Ball Flanged / Screwed Type - PN -1.6Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete 12/15 mm.

Lowering, laying and jointing in position following C.I.D/F Air valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)15 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 50 mm.

Giving satisfactory hydraulic testing of following C. I. D / F Reflex valves, Butterfly valves and Sluice valves. 50 mm.

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS:8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete 80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

Supply of C. I. Mechanical Joint Double Socket 900 (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes. 80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

Supply of CI Mechaincal joint Double Socket Reducers as described in Table -21 of IS - 13382/1992 complete with sealing rubber gasket of SBR( dimensionally described in IS-12820/ 1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes. 100x80 mm dia

150x80 mm dia

150x100 mm dia

200x100 mm dia

200x150 mm dia

250x150 mm dia

250x200 mm dia

Labour and Machinery Astt Fitter

Breaker

Helper

Mason

Pump Driver

Welder

Electrician

Painter

Hire charges for Machinery Welding set with elrctric set

Welding set with Genset

Rent for Poclain

Rent for Crane

Rent for JCB

Truck charges upto 20 km

Plumber

Disiting mud pump with operator

Rent for pump with operator

Structural steel work like hoists, channel RSJ

ARIHANT CONSTRUCTIONS

SV Biradar