Interior fit out works or furnishing of office for IRCTC regional Office at NBCC Imperia, Bhubaneshwar, Odisha

BILL OF QUANTITIES (BOQ)

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 34,66,202.55 1,04,47,862.46

3 PLUMBING & FIREFIGHTING WORKS 6,86,997.99 4,19,506.08

4 FURNITURE 1,23,60,221.69

TOTAL i/c GST 4,74,50,720.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

1 Masonry & Plaster

2 Paving & Wet Works

3 Partitions & Wall Cladding

6 Finishes & Miscellaneous

Total after applying correction factor of .973 and cost

GRAND TOTAL (Carried Forward) 1,39,14,065.01

GRAND TOTAL (Carried Forward) 1,39,14,065.01

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

CIVIL & INTERIOR WORKS

2 MASONRY AND PLASTER

Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a

2.2 11.3 floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 660.00 614.20 4,05,372.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 172.80 1,123.80 1,94,192.64

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

2.5 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

2.6 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,

balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth

2.7 5.3 level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with CUM 0.20 11,505.50 2,301.10

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20

mm nominal size derived from natural sources).

2.8 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

2.9 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 3.00 736.40 2,209.20

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 60.00 107.85 6,471.00

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over

cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This

2.12 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed SQM 50.00 617.05 30,852.50

with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4

hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised Areas as a

Back fill or platform. Laying should be done in layers with pounding done at every level to ensure a

proper cavity free installation without disturbing any existing services in the area. Cost to also include

haunching for plumbing pipes.

SUB TOTAL OF MASONRY AND PLASTER 12,50,062.63 78,990.95

3 PAVING AND WET WORKS

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

3.1 8.31 green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over SQM 75.00 1,267.95 95,096.25

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

3.2 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of

tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours,

3.3 11.40 shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement SQM 20.00 1,439.40 28,788.00

: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white

cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy grout mix of 0.70 kg of

3.4 MR organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of Engineer-in-charge.

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In

3.5 MR Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with RMT 280.00 360.35 1,00,899.30

Rubber/ PVC Jointers and Gasket.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry

3.6 11.26 mixed with pigment to match the shade of the slab, including rubbing and polishing complete with

base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing and Fixing of 15mm thick Engineered Woooden Flooring with plank width of 135/185mm and

length of 1800/2100mm and top layer up to 3mm in approved finish. Surface of Top layer shall be pre

finished with several layer of UV hardened Acrylic lacquer. The product shall be Free from

Formaldehyde and solvents. Flooring plank shall be interlocked using Plank locking system in a glue less

4.6 MR floating manner. Engineered wood planks shall be a composition of 3 layer of Pine wood with direction SQM 65.00 8,839.43 5,74,563.01

of each layer oriented at right angle to the adjacent layer of natural strain in Lacquer and Beveled in

length and width as specified by the manufacturer-in-charge. Product shall be MAKE IN INDIA. The cost

to include providing and fixing of all acessories i.e Skirting, beading, profile etc. and Underlay 2mm PE

foam and polythene combo with 40 Micron complete as required.

TOTAL FOR PAVING & WET WORKS 12,43,623.75 8,73,958.59

4 PARTITIONS AND WALL CLADDING

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special section power pressed/

roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at

the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange

of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including

fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal

screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300

mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads

at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum

(GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using board

of required thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm and

two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having

one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27

4.2 9.133 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with

fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk

ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-

incharge, the joints of the boards are finished with specially formulated jointing compound and 48 mm

wide jointing tape to provide seamless finish.

9.133.3 Plain Gypsum plaster board conforming to IS: 2095 Part -1:2011 (Board with BIS certification marks)

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with anodised

Aluminium frame fixing glass with snap on option consisting of top, bottom and side frame measuring

40-46mm x 18mm-26mm complete with glazing rubber as per manufacturer's specifications and

4.3 MR instructions of Engineer- in-charge. Rate include supply & Installation of 12 mm thk toughened glass SQM 15.00 6,015.51 90,232.63

with double sided adhesive tapes for glass to glass butt joints. Partition system from FFL to False Ceiling

level, inclusive of cost of support required for fixing in the ceiling. The frame to be powder coated in

desired shade as per the instructions of the Architect.

Providing & Fixing of double glazed modular system consists of Aluminium section of 30x75x1.5mm thick.

All sections duly anodised up to 20-25 microns with 6063-T6 grade and required accessories i.e. glass to

glass aluminium I/H sections, T section & 90 degree L sections & Glass packing to adjust the floor level.

Ceiling profile, Floor profile and wall profile are 30 mm visible face and 75 mm wide with 2 Layers of 10

mm toughened glass & insertion of Thermoplastic gasket to adhere the glass firm & airtight. The sound

reduction Value is from 42 to 45 Db complete in all respects as per instruction of engineer-in-charge.

PARTITIONING - Partition using 12mm thick HDHMR fixed on both sides on aluminium Studs Frame 50mm

x 50mm x 1.5mm as per approved sample and architectural drawings placing the same 600mm c/c.

Aluminuim frame to be fixed to floor and RCC Ceiling using fastners. The cost to include finishing visible

edges with 12mm thick mdf strip as per detail drawings.

PANELLING- Panelling using 12mm thick HDHMR fixed on one side on Aluminium Frame 50mm x 25mm x

4.6 MR 1.5mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor SQM 310.00 2,477.47 7,68,014.67

and RCC Ceiling using fastners.

1200mm high plywood partition in 2 layers of 6mm thick bendable ply including aluminium frame as

per general partition specification.

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved design

and shade, cladded on to existing surfaces. (base rate Rs. 1750/- sqm)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade

texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st

coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove

excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied

with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be

allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to

dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is

again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is

applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed

in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2

layers without gap of time.)

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS:

8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh

screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per

directions of Engineer-in-Charge.

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and

length 2400 mm or as specified by the Architect/ approving engineer, made of a high density fibre

board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade

& finish and a melamine balancing layer on the reverse side. The boards shall have a special

perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and

5mm/13mm/21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to

4.12 MR receive special clips for installation. The back of the perforated panel shall have sound absorbing non- SQM 50.00 4,544.09 2,27,204.57

woven acoustical fleece having NRC of 0.52-0.63. The panels shall be mounted on special aluminium

splines using clips. The works to be done complete as per drawings and satisfaction of engineer-in-

VENEER STORAGE CABINET FOR GENERAL STORAGE- Out of 18mm thick HDHMR Board finished using

4mm thick veneer and polished in melamine to match the veneer cladding item. The venner to be

same as the venner cladding under separate sub- head above complete with all hinges, drawer glides

4.13 M.R. and hardware from Hettich or equivalent. All internal surfaces to be completed using balancing SQM 7.00 15,651.17 1,09,558.17

laminate. Including brass D-type handles for shutters and recessed type handles for drawers. Storage to

be of all heights as per design. Storage shutters to be made in solid veneer/ glass as per design and

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 18mm thick

HDHMR board finished in 1mm Laminate. Shutters to be fixed to a frame. Rigidly fixed on both sides and

top finshed in laminate. No internal carcass required. All Hinges of hettich or equivalent. Internal

Surface of the shutter in balancing white laminate. All shutters to be provided with Stainless steel louvers

at the top and bottom of the shutter as per the site requirements and instrcution of the Engineer In

SUB TOTAL OF PARTITIONS AND WALL CLADDING 1,84,808.25 47,57,205.54

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

1200 x 300mm ACOUTIC GRID CEILING - SITC of Acoustical microlook tegular edge with 15 mm

thickness ,easily demountable tile , manufactured from High density glass wool, visible surface is

a batch painted glass tissue in white, back of the tile covered with glass tissue. Size- 1200x300x15mm

Acoustics-Sound absorption(Alpha W) - 0.95 at 200 mm o.d.s as per EN ISO 354

Acoustics-Sound absorption Class - Class A at 200 mm o.d.s as per EN ISO 11654

Acoustics-Articulation class - 180 as per ASTM E1111, ASTM E1110

NRC - 0.9 NRC as per ASTM C 423

Humidity Resistance -Permanent ambient RH up to 95% at 30*C without sagging, warping and

delaminating ( 13964:2014).

Fire Safety - Tested and classified as non combustible according to EN ISO 1182 with reaction to fire

classification class A2 s1 d0 according to EN 13501-1 - European Standard.

Light Reflectance - 83% light reflectance.

Indoor Health & Well-being - Complying with the French regulation on VOC emissions, A+ level.

Certified by the Finnish Building Information Group (RTS) with the M1 label. Free from substances of very

high Concern (SVHC) above 100 ppm as defined by the European REACH regulation

(No1907/2006).Product Certified under GRIHA council of India for Green Ratings. Environmental Product

declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards.

Circularity - Re-cycled content of more than 70%

CE marking - CE-marked according to the harmonised standard EN 13964:2014. The cost to include all

necessary hardwares required for suspending and fixing the ceiling.

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "pre-laminated board with

5.3 MR hardwood framing, dead locks, lapping all around including all hardware, hinges etc. complete as per SQM 8.00 2,935.70 23,485.62

design and drawing.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood

framings hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on

vertical & 12mm thk. Commercial ply on horizontal surface (straight & curved). Inclusive of finishing in

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing Natural Teak Veneer

on 12mm Underlay commercial Ply fixed to a subframe made using 50mm X 50mm Kiln seasoned and

chemically treated hollock wood fixed to RCC ceiilng using Fastners complete as per the instructions of

the Engineer In Charge. (base rate of veneer Rs. 1750/- sqm).

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the

specifications same as gypsum ceiling.

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the

specifications same as gypsum ceiling.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum

ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto

100mm as per drawings. (visible surface of gypsum band to not exceed 100mm) including plastic

emulsion paint.

Providing and fixing of open cell ceiling of approved manufactured from light weight G.I and folded

into u shape profiles. Each panel has a nominal cell wall thickness of 15 mm to give a precise

engineeredceiling appearance. It has a width of 15mm and height 60mm. Maximum length available

is 2 mtr and its thickness 0.45 in G.I. It has equilateral triangles having each side length 175mm. It allows

fire detection and controlsystem, air conditioning and other services to be located within the ceiling

void. all complete as approved & directed by Engineerin-Charge.

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U

Shape panels in wooden or approved finish. Panels shall be made of 0.5 mm thick galvanized steel

after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good

color stability. Centre to Centre panel gap will be 100-125 mm. Panels are fixed on to roll formed

carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold

the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss

by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max.

1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are

factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side

cap are used to cover the edges of the panels.

SUB TOTAL OF CEILING 6,23,668.00 17,35,491.57

6 DOORS/ WINDOWS

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of

45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened

6.1 MR Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Nos 6.00 67,286.87 4,03,721.24

Door Seal & Gaskets etc. in approved shade and design as per architectural drawings and instructions

of the architect. The size of door shall be upto 1050mm X 2400mm.

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of

45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened

6.2 MR Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Nos 8.00 87,901.51 7,03,212.06

Door Seal & Gaskets etc. in approved shade and design as per architectural drawings and instructions

of the architect. The size of door shall be upto 1200mm X 2400mm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

6.3 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast

lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 0.10 1,42,949.70 14,294.97

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,

6.4 9.53 nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 EACH 6.00 228.85 1,373.10

coarse sand : 6 graded stone aggregate 20mm nominal size).

LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides panel of size

upto 2400mm x 1000mm complete with Hardware including hinges, Door Closer, Mortice Lock with

Handle, latches etc. including cost of Door frame with melamine/ duco finish. The cost to include

providing and fixing of vision panel as per design.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 1050x2400. with vision panel

using FR glass complete with Fire proof door frame. One side to be finished in fire retardant paint and

one side to be finished in Laminate of approved shade. All Frame to be finished in fire retardant paint.

All hinges and hardware to be thermatically sealed and 120 mins fire rated.

SUB TOTAL OF DOORS 16,033.02 11,59,668.50

7 FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer

applied @ 0.75 ltr /10 sqm

ZEBRA BLINDS - Providing and fixing of Blinds in band width 7.5 cm - 12 cm and made up of 100%

polyster, in width of 250 - 280 cm, weight - 160g/sqm - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue

part ), Colorfastness to light - above 4 grade. Blind tube made of aluminium with a diameter of 36mm,

botom rail made of aluminum with powder coated having weight 390 gm/meter fitted with end caps

in colour matching to the fabric and mechanism of plastic with chain and metal bracket. The blind

shall have aluminum cover with the matching fabric designed on it. Aluminium profile should have

temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60

micron. The tensile strength of profile should be 9.10 Kg/mm square and elongation 18.The control

clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch

7.2 M.R. housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. SQM 125.00 5,875.59 7,34,448.24

Self-lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for

quick manual removal. It shall be driven by a ball chain pulley with ball chain and can be positioned

at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on

larger blinds. Mounting hardware brackets universal brackets including end plug bracket with lock

down retainer device. Brackets finish of powder coated metal installation brackets made of stamped

and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper

WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be

2mm diameter cord with plastic balls moulded to form an endless ball chain used for raising or lowering

action of the shades. All plastic components must be UV-stable - white in colour.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS

warranty as approval of the Architect. (Only film surface area shall be measured and paid).

Preparation of complete set of civil and interior finishing drawings including details. A qualified

professional for the purpose shall be appointed after due appproval from Engineer In Charge.

Digitally signed by AMIT

S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially

by curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall)

conforming to EN 16477 standards for back painted glass , of approved color by Architect/ Client fixed

with compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack

free time of 10 to 30 mins compatible for installation of mirror and lacquered glass / Foam based

double sided adhesive tape for instantaneous adhesion, compatible with mirror and lacquered glass

having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water

proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other

structure. The contractor should submit test reports for backpainted glass from manufacturer - High

humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical

Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured

backpainted glass should be environmentally friendly (no lead, no arsenic, no copper,

noformaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive

strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using approved

Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per shape, pattern & details given

7.6 M.R. in the drawing. The rate includes providing & fixing beading, cutting, scaffolding, nails, all materials, SQM 15.00 15,955.16 2,39,327.43

labour, lead, lifts, HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be

approved by EIC).

SUB TOTAL OF FINISHES 1,40,432.50 18,42,547.32

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

S.No. Specification Quantity unit Rate Amount Ref Image

1 Reception Table

Dimension(L) 3600mm X (D)750mmX (H) 750mm (all over ht 1200mm) 1 nos 2,56,237 2,56,237

Supplying, and placing in position of reception Table of shape and size as per design. The table to be

made out of 18mm thick commercial ply including top, under structure and modesty as per design and

drawing. The table to be finished in 12mm thick, bendable , acrylic solid surface. The cost to including

provisioning of all electrical cutouts as required.

2 Reception Chair 2 nos 23,170 46,340

Supplying and Placing in Position of medium back mesh chair in black colour with matte finish

specification : office seating- chair , type : * medium back 360ø degree revolving chair, * all over size is :

630mm Lx 675mm Dx 1115mm H , *the chair made of full mesh in black colour . it will comes in matte finsih

in contemporary style . details : * arms : amrest is having two adjustment heights up & down . * use of ply:

12 mm thick hot pressed bwr plywood is grade - 303 for seat. * seat: 40 ñ 2 mm thick polyurethane foam

with density 32 ñ3 kg per cu meter for best quality cushioning in seat , * back : frame of design shall be

curved made of two pieces injection moulded frame cover with mesh . backrest support adjustable

lumbar support * mechanism : self weighted multi locking mechanism . * only seat size is 520mm Lx 525mm

Dx 445-545mm H & the back size is 470mm Lx 590mm H , seat maximum height is 545mm & minimum height

is 445mm & back height from floor maximum height is 1115mm & minimum height is 1015mm . * gas lift 100

mm telescopic haudraulic * base : 650 mm chrome base with smooth castors. The product should be

from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

3 Sofa for Tourist Facilitation Centre

3 seater Dimension(W)2085mm X (D)1020mm X (H)900mm 1 nos 1,09,345 1,09,345

2 seater Dimension(W)1170mm X (D)1020mm X (H)900mm 2 nos 67,000 1,34,000

Supplying and placing in position of sofa as per photograph. The sofa inspiration from a Vintage design

with an imperial stance with a winged platform base supported on slender steel legs making for an

impressive look. The Sofa is Cushioned in premium Foam encased in a luxurious Olive green finish. Material:

Leatherette with detailed stitching. Premium Leatherette,Seating Height 570mm,Legs :Stainless Steel,Finish:

Matte.The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to

provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200

gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

3a Curved/ desiger sofa same as above in all permutations and combinations 8 per seat 45,000 3,60,000

4 Centre Table for Tourist Facilitation Centre

Dimension (W)1080mm X (D)550mm X (H)450mm 1 nos 43,800 43,800

Supplying and placing in position of centre table as per photograph. The centre table are made

from 10mm thick tempered glass, its artistic shape allows for a spacious tabletop and easy access

storage for magazine. The clear glass finish and the Beech wood legs enhance your living space

with exquisite glamour. Designed from 10mm thick tempered glass with Spacious tabletop. Easy

access storage with Strong Beech wood leg. The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

5 Side Table for Tourist Facilitation Centre

Dimension (L) 520mm X (D) 400mm X (H) 555mm 2 nos 29,600 59,200

Digitally signed by AMIT

Supplying & placing in position of side table as per image.Made from 10mm thick tempered

glass, its artistic shape allows for a spacious tabletop and easy-access storage for magazines and

books. The clear glass finish and the Beech wood legs enhance your living space with exquisite

glamour. Designed from 10mm thick tempered glass with Spacious tabletop. Easy access storage

with Strong Beech wood legs. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification,

BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification

under the guidance of project architect & Engineer in charge.

6 Lounge Chair for Tourist Facilitation Centre 4 nos 48,300 1,93,200

Supplying and placing in position of chair as per Image. Sense, simplicity and style best describe the

lounge chair. Its practical structure offers you a plush. Featuring a high back and slim, sturdy armrests, the

chair is proof that form and function can truly coexist.Fabric upholsterywith Steel legs with a wood

finish.Dimesnion: 543mm(L) x 558mm(D) x 822mm(H).Material :Fabric, Legs Material :Mild Steel. The

product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN

MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification. The product should be as per above given specification under the guidance of project

architect & Engineer in charge.

7 Side Table for Tourist Facilitation Centre

Dimension(W)600mm X (D)600mm X (H)550mm 2 nos 9,600 19,200

Supplying, and placing in position of side table as per image. This side table showcases an exotic oak

veneer tabletop, while the solid wood tapered legs with an inner arch boast a study in an open design.

The Chamfer- edged tabletop and inner arch on the legs add a statement appeal.Lacquer polish ensures

high water and stain resistance.Material & Subtype:Veneer - Oak Veneer, Solid Wood - Rubber Wood,

Engineered Wood - MDF, Table Top Material:Veneer, Frame Materia:Engineered Wood, Leg Material:Solid .

Wood, FinishMatte, Colour & Colour Family:Brown - Mohagany. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

8 Linear Workstation

Dimension: 1200mm(L) x 600mm(D) x 1050mm(H) 36 nos 75,274 27,09,872

Supplying, and placing in position of linear workstation as per Image.The worktop made out of 25mm thk.

Prelam Particle board with 2 mm thk PVC edge banding.The Table top supported on Mild Steel of size

50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with Powder coating of 50

Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire carrying

purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder

coating of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating 50 micron

below top for wiring( Non- sharing workstation ). Also having a provision of 0.8mm ms perfoated sheet

hanging modesty. provision of 10mm thk glass divider rest on the "D" brackets on the table top between

opposite seatings. All working or non working edges shall be provided with machine pressed 2mm thick

PVC edging using special hot melt glue at hot temperature. Also a provision of Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage

unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking

arrangement. Provision of pullout PVC keyboard tray and CPU trolley for each seating.Provision of glass

divider between two seating. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification,

BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification

under the guidance of project architect & Engineer in charge.

9 L-Shape Workstation

Dimension: 1500mm(L) x 1200mm(L) x 600mm(D) x 1050mm(H) 19 nos 1,02,945 19,55,963

Digitally signed by AMIT

Supplying, and placing in position of l-shape workstation as per Image.The worktop made out of 25mm

thk. Prelam Particle board with 2 mm thk PVC edge banding.The Table top supported on Mild Steel of size

50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with Powder coating of 50

Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire carrying

purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder

coating of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating 50 micron

below top for wiring( Non- sharing workstation ). Also having a provision of 0.8mm ms perfoated sheet

hanging modesty. provision of 10mm thk glass divider rest on the "D" brackets on the table top between

opposite seatings. All working or non working edges shall be provided with machine pressed 2mm thick

PVC edging using special hot melt glue at hot temperature. Also a provision of Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage

unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking

arrangement. Provision of pullout PVC keyboard tray and CPU trolley for each seating.Provision of glass

divider between two seating. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification,

BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification

under the guidance of project architect & Engineer in charge.

10 Workstation Chair 55 nos 16,950 9,32,250

Supplying and placing in position of medium back 360° degree revolving chair all over size is: 610mm (l) x

470mm (d) x 1040mm (h) as per image. The chair made of full mesh in black colour .it will comes in matte

finish in contemporary style. Arms: armrest is having two adjustment heights (up & down).use of ply: 12 mm

thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with

density 32 (±3) kg per cu meter for best quality cushioning in seat , back : frame of design shall be curved

made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar

support, mechanism: self weighted multi locking mechanism, gas lift 100 mm telescopic haudraulic base:

650 mm chrome base with smooth castors . The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

11 Medium height storage

Dimension: 3800mm(L) x 450mm(D) x 1050mm(H) 2 nos 1,10,250 2,20,500

Dimension: 1200mm(L) x 450mm(D) x 1050mm(H) 6 nos 35,000 2,10,000

Dimension: 1650mm(L) x 450mm(D) x 1050mm(H) 1 nos 48,125 48,125

Supplying, and placing in position of medium height storage @ 1050mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit

top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves

and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm

thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit

having openable shutters withD shape handles & locking arrangement. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

12 Main Table for Cubicles

a Main Table Dimension:2200mm (L)x 1000mm (Dx 750mm (H)

Side runner Dimesnion: 1050mm (L)x 500mm (D)x 720mm (H)

b Main Table Dimension:1500mm (L)x 750mm (Dx 750mm (H)

Side runner Dimesnion: 900mm (L)x 500mm (D)x 720mm (H)

Digitally signed by AMIT

Supplying and Placing in Position of table structure of l shaped desk . Primary work surface over all size is

2200mm (Lx 1000mm (Dx 750mm (H) 45mm thick table top made of hp laminate post form work surface

with warm finish in black oak postforming edges in matching color. side panel is made of 45mm thick .

Provision of side unit of size is 1000mm (Lx 500mm (Dx 720mm (H ,(combination construction below table

top side unit have 1 open fixed shelve with 3 dawers + 2 openable doors . Mobile pedestal of size 450mm

(Lx 400mm (Dx 630mm (H , having 2 drawers + 1 filling drawer with castors in provided with central lock for

security and handles are provided for easy of opening. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification,

AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

13 Back Storage for Cubicles

Dimension: 2700mm(L) X 450mm(D) x 750mm(H) 1 nos 56,250 56,250

Dimension: 1400mm(L) X 450mm(D) x 750mm(H) 1 nos 28,750 28,750

Dimension: 2200mm(L) X 450mm(D) x 750mm(H) 1 nos 45,625 45,625

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing

. The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made

from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be

made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-

laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having

openable shutters withD shape handles & locking arrangement. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

14 Main Chair for Cubicles 7 nos 25,520 1,78,640

Supplying and Placing in Position of medium back mesh chair in black colour with matte finish

specification : office seating- marvel chair , type : * medium back 360ø degree revolving chair, * all over

size is : 640mm (L)x 670mm (D)x 1100mm (H) , *the chair made of full mesh in black colour . it will comes in

matte finsih about style type is modern. details : * arms : amrest is having two adjustment heights (up &

down) . * use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). * seat: 40 ñ 2 mm

thick polyurethane foam with density 32 (ñ3) kg per cu meter for best quality cushioning in seat , * back :

frame of design shall be curved made of two pieces injection moulded frame cover with mesh . backrest

support adjustable lumbar support * mechanism : self weighted multi locking mechanism . * only seat size

is 500mm (L)x 500mm (D)x 540-440mm (H) & the back size is 480mm (L)x 570mm (H) seat maximum height is

540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum

height is 1000mm . * gas lift 100 mm telescopic haudraulic base : 650 mm chrome prong base is 620mm

pitch center dia (660mm with castors). The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification,

BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification

under the guidance of project architect & Engineer in charge.

15 Visitor Chair for Cubicles Cabin 17 nos 23,170 3,93,890

Supplying and Placing in Position of medium back mesh chair in black colour with matte finish

specification : office seating- nature chair , type : * medium back 360ø degree revolving chair, * all over

size is : 630mm Lx 675mm Dx 1115mm H , *the chair made of full mesh in black colour . it will comes in

matte finsih in contemporary style . details : * arms : amrest is having two adjustment heights up & down . *

use of ply: 12 mm thick hot pressed bwr plywood is grade - 303 for seat. * seat: 40 ñ 2 mm thick

polyurethane foam with density 32 ñ3 kg per cu meter for best quality cushioning in seat , * back : frame

of design shall be curved made of two pieces injection moulded frame cover with mesh . backrest

support adjustable lumbar support * mechanism : self weighted multi locking mechanism . * only seat size

is 520mm Lx 525mm Dx 445-545mm H & the back size is 470mm Lx 590mm H , seat maximum height is

545mm & minimum height is 445mm & back height from floor maximum height is 1115mm & minimum

height is 1015mm . * gas lift 100 mm telescopic haudraulic * base : 650 mm chrome base with smooth

castors. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification. The product should be as per above given specification under the

guidance of project architect & Engineer in charge.

Digitally signed by AMIT

16 Visitor Chair for Cubicles Cabin 1 nos

Supplying and placing in position of fix cantilever fix cantilever chair all over size is: 500mm(l)x 500mm(d)x

1030mm(h) as per image, the chair made of full mesh in black colour .it will come in matte finish in

contemporary style. arms: fixed pp armrest. Use of ply: 12 mm thick hot pressed bwr plywood (is grade -

303 for seat). seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat, back: frame of design shall be curved made of two pieces injection moulded frame

cover with mesh. backrest support adjustable lumbar support Only seat size is 500mm(l)x 610mm(d)x

470mm(h) & the back size is 450mm(l)x 580mm(h), Fixed cantilever chair. base: chrome finish tubular

frame of cantilever type. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

17 Main Table for Cubicles -01,02

Dimension: 1200mm(L) X 600mm(D) X 750mm(H) 1 nos 45,600 45,600

Supplying, and placing in position of Free standing table as per Image/drawing. The table top are made

up of 25mm thick pre-laminated particle board with 2mm thk pvc edge banding . The Table supported

with 18mm thk Prelam Particle board side panel & Modesty panel. The working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of

one fixed Pedestal storage unit (combination of two drawers and one filing drawer) . Pedstal Unit made of

18mm thk prelaminated particle board with 2mm thk pvc edge banding. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

18 Main Chair for Cubicles -01,02 1 nos 18,370 18,370

Supplying and placing in position of high back 360° degree revolving chair all over size is: 640mm (l) x

480mm (d) x 1240mm (h) as per image. The chair made of full mesh in black colour .it will comes in matte

finish in contemporary style. Arms: armrest is having two adjustment heights (up & down) .use of ply: 12

mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with

density 32 (±3) kg per cu meter for best quality cushioning in seat, back: frame of design shall be curved

made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar

support, mechanism: self weighted multi locking mechanism .gas lift 100 mm telescopic haudraulic , base

: 650 mm chrome base with smooth castors. The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

29 Visitor Chair for Cubicles -01,02 2 nos 16,950 33,900

Supplying and placing in position of medium back 360° degree revolving chair all over size is: 610mm (l) x

470mm (d) x 1040mm (h) as per image. The chair made of full mesh in black colour .it will comes in matte

finish in contemporary style. Arms: armrest is having two adjustment heights (up & down).use of ply: 12 mm

thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with

density 32 (±3) kg per cu meter for best quality cushioning in seat , back : frame of design shall be curved

made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar

support, mechanism: self weighted multi locking mechanism, gas lift 100 mm telescopic haudraulic base:

650 mm chrome base with smooth castors . The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

20 Round table for Cafetaria

Dimension: 1150mm(Dia) x 750mm(H) 5 nos 48,000 2,40,000

Supplying, and placing in position of round table as per image/drawing. The Table top made out of

25mm thk prelam particle board with 2mm thk pvc edge banding with ms powder coated "C" shape legs

of size 50mm x 50mm Comprising of metal powder coated cross connectors of size 40mm X 25mm. The

working or nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging

using with special hot melt glue at hot temperature. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification,

AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge. Digitally signed by AMIT

21 Chair for Cafetaria 20 nos 4,166 83,320

Supplying and Placing in Position of Stackable modern design cafeteria chair - coco material : synthetic

fiber size :381mm(l)x 419mm(d)x 839mm(h). colour : white finish : shiny for legs, Cafeteria chair size is

381mm(l)x419mm(d)x 839mm(h) a combination of synthetic fiber with stainless steel make the products

utile and a delight, the complete structure shall be made up of 20% glass filled blow molded high-density

polyethylene andis,the frame structure shall

be supported by ( 2 straight + 2 slant ) four legs.the tubular welded frame is made from dia2.22 +/-

0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless steel 202 grade tube & the

tube are buff polished to give shiny finish.seat and in back given handle to hold are made of injection

moulded high impact strength polypropylene polymer compound with indoor grade uv resistance and

pressed fitted with legs.the chair is easy to store when not in use, since you can stack up to 6 chairs on top

of each other. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

22 Table for Cafetaria

Dimension: 4400mm(L) x 600mm(D) x 1050mm(H) 1 nos 1,59,532 1,59,532

Dimension: 4800mm(L) x 600mm(D) x 1050mm(H) 1 nos 1,72,217 1,72,217

Supplying, and placing in position of bar counter table as per Image/drawing . Table top is made out of

42mm thk prelam particle board with 2mm thk pvc edge banding & side panel made out of 36mm thk &

modesty panel is made out of 25mm thk prelam particle board with 2mm thk pvc edge banding. Also

having a provision of foot rest panel in the bottoom. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification,

AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

23 Barstool for Cafetaria 12 nos 11,600 1,39,200

Supplying, and placing in position of high stool as per Image. The counter stool brings together a

sophisticated mix of materials. The slender metal frame features a comfortable footrest, topped with a

beautifully tailored sumptuous velvet seat and enveloping crescent back that both maximize comfort

while entertaining. Streamlined and stylish, Derby makes a handsome addition to your home bar or

kitchen island. Material & Subtype:Metal, Fabric - Velvet, Frame Material:Metal, Upholstery Material:Fabric -

Velvet Filling MaterialFoam, Seat MaterialFabric - Velvet, Leg Material:Metal, Colour & Colour Family:Grey

- Ash Grey, Black, Dimension:(W450mm X (D)470mm X (H)900mm, Seating Height :660mm. The product

should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK

Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA

Certification. The product should be as per above given specification under the guidance of project

architect & Engineer in charge.

24 Conference table

Dimension: 4500mm(L) x 1200mm(D) x 750mm(H) 1 nos 2,41,193 2,41,193

Supplying and placing in position of conference table as per image., tabletop offers you a generous

workspace, desk primary work surface use premium quality materials of 25mm thick which give more

surface area for work ,table top made of prelaminated particle board of grade ii type iii of is 12823/latest,

tabletop supported with nontoxic ms powder coated smart series slant legs made in ms is:304 grade of

leg size 50mm x 50mm under structure and horizontal connectors,0.12 mm thick. Our work surface

furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching

colour and shade, fixed with hot melt glue. On table top power box cut-out to access switches + data

ports, up box above on table top with single metal ms powder coated to the thickness 50-60 microns (+/-5

micron) raceway & electrical pole below top for wiring. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification,

AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

25 Conference Chair 13 nos 23,170 3,01,210

Digitally signed by AMIT

Supplying and Placing in Position of medium back mesh chair in black colour with matte finish

specification : office seating- nature chair , type : * medium back 360ø degree revolving chair, * all over

size is : 630mm Lx 675mm Dx 1115mm H , *the chair made of full mesh in black colour . it will comes in

matte finsih in contemporary style . details : * arms : amrest is having two adjustment heights up & down . *

use of ply: 12 mm thick hot pressed bwr plywood is grade - 303 for seat. * seat: 40 ñ 2 mm thick

polyurethane foam with density 32 ñ3 kg per cu meter for best quality cushioning in seat , * back : frame

of design shall be curved made of two pieces injection moulded frame cover with mesh . backrest

support adjustable lumbar support * mechanism : self weighted multi locking mechanism . * only seat size

is 520mm Lx 525mm Dx 445-545mm H & the back size is 470mm Lx 590mm H , seat maximum height is

545mm & minimum height is 445mm & back height from floor maximum height is 1115mm & minimum

height is 1015mm . * gas lift 100 mm telescopic haudraulic * base : 650 mm chrome base with smooth

castors. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification. The product should be as per above given specification under the

guidance of project architect & Engineer in charge.

26 Low Hight Storage for Conference

Dimension: 5500mm(L) X 450mm(D) x 750mm(H) 1 nos 1,14,375 1,14,375

Supplying, and placing in position of low height storage @ 750mm height as per photograph/drawing .

The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made

from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be

made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-

laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having

openable shutters withD shape handles & locking arrangement. The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

27 Main Table for R.M Office

Main Table Dimension:(L)2800mm X (D)1130mm X (H)770mm

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Supplying, and placing in position of table as per photograph. This precise Boss's Desk is designed with

superb qualityFinish made of engineered wood-medium density fibre board & veneer glossy finish on the

same. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic

statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The

modesty frame of the table gives the great look with panel upholstered wth PVC material which gives the

leatherette look.Main Table top thkness 80mm , side panel/gable end in 70mm thk mdf with venner glossy

finish. Main table and side runner having a skirting @120mm thk with gives a rich look. The office desk

comes with the side runner having enough storage space.The side runner top with a thickness of 80mm

thk that gives the great look . Side table, side panel, shelves,drawers made up of 18mm thk mdf with

venner finish. Table having a provision of Pedestal of size: 400(L) X 500(D) X 660(H) having three drawers to

store essential & undestructure made out of 18mm thk mdf with venner finish .Drawers have the stylish

handle which enhance the look. Material & Subtype:Engineered Wood - Medium Density Fibre Board,

Colour & Colour Family:Red - Cherry.side storage unit having a side panel, one drawer , one shutter &

one shelf of 18mm thk mdf with venner finish. The product should be from manufacturer(OEM) which

have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

28 Storage for R.M Office

Dimension: 2400 mm(L) x 400 mm(D) x 1040 mm( h) 1 nos 1,10,800 1,10,800

Digitally signed by AMIT

Supplying and Placing in Position of back unit storage material : prelaminated particle board/veneer -

mdf/steam beech veneer , back unit size : 2400 mm lx 400 mm dx 1040 mm h. colour : red - dark cherry &

finish : glossy . * providing & suppling placing position of modular back unit top shall be made from 25 mm

thick prelaminated particle board/veneer - mdf/steam beech veneer of grade ii type iii of is 12823/latest

& confirm to din 68861. iso 9001- 2015. * while rest of the sides as well as shelves and shutter to be made

up of 18 mm thick prelaminated particle board/veneer - mdf/steam beech veneer p. u. polish. all edges

to be provided with same matching veneer edge banding fixed with the hot melt glue. * storage unit with

3 open carcass, 4 shutters + 3 drawers construction is below the top 3 open carcass shelves at same size

per carcass size is 555 l x 380 h ,2 openable doors with 1 fixed shelve + 3 drawers + 2 openable doors with

1 fixed shelve , in provided with 2 universal cam lock + 1 central locks for drawer's for security and handles

are provided for easy of opening. over all height of product is @ 1040 mm . * each shutter should be fixed

with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall

have 100 mm size ss fancy handles one on each drawer with necessary hardware/ fitting/ hinges etc. of

approved qualitymake: ebco. for installation of side unit wooden dowels and minifix to use for additional

support. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification. The product should be as per above given specification under the

guidance of project architect & Engineer in charge.

29 Main Chair for R.M Office 1 nos 39,400 39,400

Supplying, and placing in position of 360 degree revloving high back chair as per Image.The Leatherette

office chair is a ergonomic high back chair made for a business tycoon or a director. The seat is

constructed from a combination of resilient plywood and soft foam for a comfortable seat. The foam

cushions are encased in a chocolate brown leatherette upholstery. The seat arms come padded with

foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a synchro multi

locking mechanism the chair offers you extreme comfort as per your seating position. The office seat is

supported by a shiny chrome base powered by sturdy nylon castors.Material & subtype:Premium

Leatherette, Colour & Colour Family :Brown,Dimension (W)655mm X (D)500mm X (H)1230mm,Finish Glossy.

The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-25 kg/m3.The backrest has a foam of 28D. The product should be

from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

30 Visitor Chair for R.M Office 3 nos 36,000 1,08,000

Supplying, and placing in position of 360 degree revloving medium back chair as per Image.The seat is

constructed from a combination of resilient plywood and soft foam for a comfortable seat. The foam

cushions are encased in a chocolate brown leatherette upholstery. The seat arms come padded with

foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a synchro multi

locking mechanism the chair offers you extreme comfort as per your seating position. The office seat is

supported by a shiny chrome base powered by sturdy nylon castors.Material & subtype:Premium

Leatherette, Colour & Colour Family :Brown,Dimension (W)555mm X (D)500mm X (H)1105mm,Finish Glossy.

The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-25 kg/m3.The backrest has a foam of 28D. The product should be

from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product

should be as per above given specification under the guidance of project architect & Engineer in charge.

31 Sofa for R.M Office

2 seater Dimension(W) 1530mm X (D)710mm X (H)770mm 1 nos 71,400 71,400

Supplying, and placing in position of sofa as per Image. The sofa is crafted from the best materials to

make a sofa that's truly worthy of your living room. Upholstered in a premium leatherette, the sofa is a sight

for sore eyes. The curved box cut design adds an elegant charm to any space. The solid wood frame and

legs give a sturdy presence to the sofa. Seating Height 425mm,Legs Solid Wood. The seat cushion is made

of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification,

INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, GRIHA Certification. The product should be as per above given specification under the

guidance of project architect & Engineer in charge. Digitally signed by AMIT

32 Table for Mini Pantry Dining area

Dimension:(W) 4600mm X (D)600mm X (H)750mm 2 nos 87,298 1,74,596

Supplying, and placing in position of table as per image/drawing. The Table top made out of 25mm thk

prelam particle board with 2mm thk pvc edge banding with ms powder coated "C" shape legs of size

50mm x 50mm Comprising of metal powder coated cross connectors of size 40mm X 25mm. The working

or nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging using with

special hot melt glue at hot temperature. The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification. The product should be as per above given

specification under the guidance of project architect & Engineer in charge.

33 Chair for Mini Pantry Dining area 8 nos 4,166 33,328

Supplying and Placing in Position of Stackable modern design cafeteria chair - coco material : synthetic

fiber size :381mm(l)x 419mm(d)x 839mm(h). colour : white finish : shiny for legs, Cafeteria chair size is

381mm(l)x419mm(d)x 839mm(h) a combination of synthetic fiber with stainless steel make the products

utile and a delight, the complete structure shall be made up of 20% glass filled blow molded high-density

polyethylene andis,the frame structure shall

be supported by ( 2 straight + 2 slant ) four legs.the tubular welded frame is made from dia2.22 +/-

0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless steel 202 grade tube & the

tube are buff polished to give shiny finish.seat and in back given handle to hold are made of injection

moulded high impact strength polypropylene polymer compound with indoor grade uv resistance and

pressed fitted with legs.the chair is easy to store when not in use, since you can stack up to 6 chairs on top

of each other. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, GRIHA Certification. The product should be as per above given specification under

the guidance of project architect & Engineer in charge.

Digitally signed by AMIT

Manufacturing, providing and Placing Compactor Storage (as per finally approved sample by

department) of following dimensions with the following specifications.

Supplying and fixing in position Mobile Storage Compactor : 915 W x 450D x 2080Hmm ,where in each

body should be of following configuration and specification consisting of One no.Fixed Single one side

openable Unit & One, one end single openable mobile unit & between the Main Fixed unit & end mobile

unit having single/ double side mobile unit. The System shall be modular & movable type(Knock Down)

with 4-5 loading levels. Each Shelves loading capacity should be 42-48 kg. Each unit shall be connected

from the End back with the Dust proof arrangement with the help of Tong and Groove system

arrangement . Handle shall be made of ABS in round type with Dia of 350mm minimum with a safety lock

System at the Centre. channel of the compactor shall be U – Channels formation to carry more weight

and to get more rigidity. Mechanical arrangement shall be concealed inside the System, only handle shall

be installed at the outer Sheet of the Compactor as Shown in the Drawing. The component specification 12 nos 62,423 7,49,075

shall be as follows. channel U - Section: Section shall be minimum 1.0mm thk. Material Thickness : Back

Sheet : 0.8mm; Shelf: 0.8mm; Side Sheet: 0.8mm;Under Carriage Frame - HR sheet 2.5mm thick. channel

Post: U - Shaped Post. Wheel: Iron die casting with anti-rust coating, Loading : 950-1000kg/Wheel There

shall be central locking system with wire, handle lock, Rail lock Plate & Rail Lock assembly in the chain

box cover. The material used for the system shall be as per following standards:- Steel CRCA IS - 513 D HR

10748 All steel component shall be given 7 tank ntirust Phosphting treatment and to shall be Powder

coated and baked at 200o centigrade with 60 -70 microns quoting thickness. All steel components shall

be given a thorough antirust treatment. Product should be BIFMA gold rated SCS global certified for

inhouse air quality and with 05 years warranty.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 0.00 3,01,855.36

B WATER SUPPLY 32,761.55 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 47,568.20 0.00

D SPRINKLER PIPING & ACCESSORIES 6,05,167.00 1,17,650.73

Total after applying correction factor of .973 and cost index of

Total Cost ( Carried Forward) in Rs. 11,06,504.07

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed

vitreous china single trap syphonic pattern having back

inlet, supporting chair, wall hung water closet complete

with all internal fittings/ accessories and CP brass flush bend

(European type) water closet with seat and lid, with C.P.

1 MR brass hinges and rubber buffers, adapter, rubber joints fixed

to W.C., C.P. brass screwed washers including cutting and

making good the walls and floors wherever required and

HDPE WC pan connector including jointing with white

cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I Each 3 27,825.34 83,476.02

Supply, installation, testing and commissioning of concealed

2 MR cistern including flush plate and all internal fittings/

accessories including cutting and making good the walls

and floors wherever required complete in all respects. Each 3 12,365.33 37,096.00

Supply, installation, testing and commissioning of glazed

vitreous china wash basin with R.S. or C.I. brackets painted

white, 32mm C.P. brass waste of standard pattern , C.P

3 MR brass wall flange 32 mm dia. C.P. brass bottle trap and

union 32 mm dia C.P. pipes to wall flange. complete

including cutting and making good the walls wherever

3.1 Undercounter wash basin Each 3 8,363.70 25,091.10

Supply, installation, testing and commissioning of 15mm C.P.

brass single hole wash basin mixer without popup waste

system with 450mm long copper pipes and brass nut Each 3 6,064.37 18,193.12

Providing & fixing toilet paper holding including cutting and

making good the walls. Each 3 1,566.63 4,699.88

Providing & fixing Horizontal liquid soap dispenser with

6 MR stainless steel lid and brackets fixed to wooden cleats with

C.P. brass screws. Each 3 3,714.79 11,144.36

Providing & fixing C.P. brass coat hooks fixed on toilet door

with C.P. brass screws Each 3 618.70 1,856.10

Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

8 MR ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as

per design including polishing Sqm 5 2,815.06 14,075.31

9 MR Providing & fixing Hand Shower (Health Faucet) with 8mm

dia, 1M long PVC tube and wall hook CP brass wall flange Each 3 1,786.14 5,358.43

Digitally signed by AMIT

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

05 litres capacity (Horizontal /Vertical type1.5 kw electrical

Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality. Each 3 1,585.89 4,757.67

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Automatic Fragrance Dispenser machine complete with

refill can and 'C' size battery (2 Nos) for operation fixed to

wooden cleats with CP brass screws Each 3 4,623.87 13,871.60

Providing and fixing of stainless steel finish Paper Towel

13 MR Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws Each 3 5,556.35 16,669.04

Providing and fixing of wall mounted fully automatic hand

14 MR dryer in SS/ black finish as per approval complete will all

accessories. Each 3 5,902.96 17,708.89

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel plug

40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

Supply, installation, testing and commissioning of 15mm C.P.

brass single hole sink mixer complete. Each 1 11,967.80 11,967.80

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures

shall be selected by Architect/Interior designer/Project

manager and the same shall be binding for execution.

No additional fixing cost shall be paid for change in type of

sanitary fixtures.

Contractor to receive all the above mentioned items &

store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 3,01,855.36

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

(CIVIL) DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as

2 17.35 Providing and fixing soil, waste and vent pipes.

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Metre 10.00 1,180.75 11,807.50

17.35.2 75 mm diameter :

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Metre 10.00 1,186.00 11,860.00

Providing and fixing single equal plain junction of reqd. degree with

3 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 925.70 1,851.40

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 665.05 1,330.10

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 1.00 811.90 811.90

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 1.00 561.20 561.20

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 1.00 705.20 705.20

Digitally signed by AMIT

SL. DSR Rate NS Rate DSR Amount NS Amount

(CIVIL) DESCRIPTION OF ITEMS UNIT Qty

17.38.2.2 Sand cast iron S&S as per IS- 3989 Each 1.00 522.80 522.80

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 2.00 570.05 1,140.10

17.39.2.2 Sand cast iron S&S as per IS - 3989 Each 2.00 390.50 781.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS - 3989 Each 2.00 513.15 1,026.30

17.57.2.2 Sand cast iron S&S as per IS - 3989 Each 2.00 362.05 724.10

Providing and fixing MS holder bat clamps of approved design to

cast iron (spun) pipe embedded in and Including cement concrete

8 17.37 blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) including cost of cutting holes

and making good the walls etc.

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval

quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 10.00 82.80 828.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 10.00 62.95 629.50

Providing lead caulked joints to sand cast iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

Digitally signed by AMIT

SL. DSR Rate NS Rate DSR Amount NS Amount

(CIVIL) DESCRIPTION OF ITEMS UNIT Qty

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

15 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 1,032.40 2,064.80

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 47,568.20 0.00

Digitally signed by AMIT

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

DSR 2019 (WET RISER

SL. DSR Rate NS Rate DSR Amount NS Amount

& SPRINKLER DESCRIPTION OF ITEMS UNIT Qty

SYSTEM) REF. NO.

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

1 18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on

the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic

enamel paint of required shade complete as required :

Providing & fixing of flow switch in following sizes M.S.

pipe including connection etc. as required.

Providing and fixing ISI Marked of approved make Fire

4 MR Extinguishers complete with all accessories as per

manufacturer's specifications.

4.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 2.00 13,940.64 27,881.28

Mechanical Foam gas cartridge type. 9 Kg capacity

Digitally signed by AMIT

DSR 2019 (WET RISER

SL. DSR Rate NS Rate DSR Amount NS Amount

& SPRINKLER DESCRIPTION OF ITEMS UNIT Qty

SYSTEM) REF. NO.

ABC dry powder stored pressure type 6 kg capacity

Providing, fixing, testing & commissioning of 15mm dia

5 18.21 quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories:

5.4 18.21.4 Concealed sprinkler NOS. 80.00 1,435.00 1,14,800.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of

6 18.25 875 PSI (Burst) with branch line (Inlet) 25mm NPT male

thread to sprinkler head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side brackets, center

bracket, stockbar of following sizes complete as

Providing and fixing signages/ evacuation plans

printed on photoluminescent U1000 aluminium sheet

of 1.0 mm (+ -10%) containing lumigen II as base

chemical, covered under UV stablized coating and of

appropriate size including fixing on wall, door, ceiling

etc. with proper clamps, hangers, cleats anchor

fasteners etc. complete in all respacts as diercted by

Engineer-in-charge

Providing, jointing and testing of automaticaly

operated Halotron fire extinguishers(cap-

5kg,temperature rating-68degc,test pressure-30bar)

complete with all accessories/fittings.

TOTAL CARRIED TO SUMMARY 6,05,167.00 1,17,650.73

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. DSR Rate DSR Amount NS Amount

(CIVIL) DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

1 18.8 clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the the same including testing

of joints complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 30.00 537.60 16,128.00

18.8.3 25 mm nominal dia Pipes Metre 15.00 627.25 9,408.75

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

Providing and fixing C.P. bass angle valve for basin mixer and

3 18.53 geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 20.00 121.90 2,438.00

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 32,761.55

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

Summary for E & M Component

Sub Head Descriptions DSR Amounts NDSR Amounts

SH-l EI- Point Wiring, DB, Earthing, Lighting, Cable, Cable Tray, LT Panel 29,28,302.00 41,33,750.88

Total after applying correction factor of .973 and cost index of 1.03 except

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Regional Office of IRCTC at Bhubaneshwar, Odisha

Bill of Quantity for E & M Component

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

(SH-I: EI WORKS)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (

without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

3 1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

8 1.31 recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Each 5.00 477.00 2,385.00

switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in

9 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each 5.00 586.00 2,930.00

modular switch, connections etc. as required.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal

enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and complete with connections, testing

and commissioning etc. as required.

Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI

Sheet raceways height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of

11 MR. raceways and junction box shall be joined together to make it dust proof. Chipping and

removing screed to install the raceways in floor, including removal and disposing of debris /

fixing in ceiling along with suspender and accessories as per instruction of Engineer in charge.

Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI

Sheet raceways height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of

12 MR. raceways and junction box shall be joined together to make it dust proof. Chipping and

removing screed to install the junction box in floor, including removal and disposing of debris /

fixing in ceiling along with suspender and accessories as per instruction of Engineer in charge.

13.0 b 350 mm (wide) x 350 mm (length) X 40 mm (height) Each 5.00 2,290.00 11,450.00

13.1 c 250 mm (wide) x 300 mm (length) X 40 mm (height) Each 5.00 1,870.00 9,350.00

13.2 d 200 mm (wide) x 200 mm (length) X 40 mm (height) Each 15.00 1,660.00 24,900.00

13.3 e 150 mm (wide) x 150 mm (length) X 40 mm (height) Each 15.00 1,270.00 19,050.00

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess

13 1.2 including painting in case of surface conduit, or cutting the wall and making good the same in

case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

14 1.21 surface/recess including cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core

cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned

17 2.5 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs

and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

Providing and fixing following rating and breaking capacity and pole MCCB with

18 2.2 thermo magnetic release and terminal spreaders in existing cubicle panel board including

drilling holes in cubicle panel, making connections, etc. as required.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

19 2.11 Supply and fixing single pole blanking plate in existing MCB DB complete etc. as required. Each 4.00 13.00 52.00

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

21 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

22 2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, MCCB in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of four pole, (three phase and neutral), 415 volts, MCB in weatherproof

enclosure complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

24 2.10 suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supply, installation, testing and commissioning of the following sizes of PVC trunking system

with end caps, bends, elbows complete as required.

Providing and fixing of Gel-Chemical Earthing Electrode of G.I. made as pipe in pipe

technology(IS:3043 : 1987)duly CPRI Approved as per following specification:

Length - (3000 mm)

DIA (outer) - (80 mm)

DIA (Inner) - (40 mm)

26 MR DIA-Terminal Strip Hole - (25 mm) Each 4.00 46,890.00 1,87,560.00

Space Inside Electrodes - (Filled with Conductive Mixture)

Hot Dip Galvanizing - (70 - 100 Microns)

And earth enhancing compound should be used to treat the soil for lowering the effective

ground impedance 50Kg for each earth pit to make it maintenance free and to minimize the

ground voltage potential rise and pit covered with PVC Cover.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode

27 5.10 including connection with brass nut bolt, spring, washer excavation and re-filling etc. as P/Mtr 50.00 1,551.00 77,550.00

Preparation of complete set of MEP drawings including details. A qualified professsional for the

purpose shall be appointed after due appproval from Engineer In Charge.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode

29 5.11 including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as P/Mtr 50.00 706.00 35,300.00

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.

32 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. P/Mtr 100.00 70.00 7,000.00

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying & Laying of following sizes copper conductor PVC insulated PVC unsheathed

33 unarmoured flexible cables confirming to IS: 7098 (Part-I) 1988 of 1.1 KV in existing open

masonry duct/ surface/ raceways/ pipe etc complete as reqd.

Supply, installation, testing and commissioning of copper Earth busbar of size 50 X 5 X

34 400 mm in suitable size MS sheet enclosure made out of 1.6mm thick MS Sheet duly Each 1.00 3,502.00 3,502.00

painted with locking arrangement etc. complete as reqd.

Supply, installation, testing and commissining of 15W +/-2W recessed mounted LED Circular

Down lighter luminaire with system lumen output ≥1500 lm. Luminaire shall be made up of

Pressure die cast aluminium housing with 145 mm (±5mm) dia of cutout. Luminaire shall have

Optical Grade High Efficiency Translucent Optical compartment for very high efficiency.

Luminaire should have IP rating of IP40 as protection.Optical compartment shall have Unique

HET diffuser for wider and uniform distribution. LM 80-08 compliant, ANSI rated LEDs from reputed

makes such as Nichia, Japan / Cree, USA / Bridge lux, USA / Lumiled USA / Ever light should be

provided. Luminaire shall use multiple LEDs of less than 1W Class for better diffusion and heat

management. LEDs must be driven at 70% of maximum rated current for higher reliability in all

our products. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs.

(Complete LM 80 test report for LED should be submitted). The LEDs used in luminaire should be

ANSI standard Rated LED with CCT of 4000K and CRI of 80. LEDs used must be tested as per

EN62471 for Photo Biological Safety of humans and Report of the same from LED Manufacturer

shall be submitted. Isolated type, multistage Constant Current topology driver suitable to

operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3KV surge

protection. The driver should have efficiency of ≥85% with Power factor ≥ 0.95 and ITHD of ≤ 10%

should be integral to the luminaire. Driver shall be made in India for better service and

availability. Driver output voltage shall be less than SELV limits for safe DC operation and

maintenance. LM79 Test Report from Third Party NABL Lab to be submitted in the event of order

to confirm above parameters. Dimension-159x39 mm (±5mm).

Supply, installation, testing and commissining of 20W, recessed, 1205mm linear, IP20, LED

luminaire with system efficacy of 105 lumen/watt, and system lumen output of 2100 lumen,

operating in an ambient temperature of 0⁰C to 45⁰C. Operating at 50Hz frequency, luminaire

shall have extruded aluminium housing in white with high efficiency translucence diffuser and

must have provision for end to end seamless connectivity. EMC package of wattage of 0.2-0.5

W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. LM 80-08

compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul

should be provided. The LED shall comply with L70 life of 50000 burning hours tested at

maximum current. The LEDs used should be with CCT of 4000 K and CRI of Minimum 80, with

MacAdam CCT binning ≤3 . LED Driver shall be Isolated type, Constant Current topology driver

with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to

270V (nominal rated voltage – 240V) with 3KV internal surge protection, Power factor of

minimum 0.95, driver efficacy of minimum 85% and total harmonic distortion (THD) of less than

or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab

approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be

submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian

Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) :

2012; IS 16108 : 2012. Dimension: 1205 mm

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply, installation, testing and commissioning of Integral, SMD 4x1 Backlit LED Panel, IP 20, 36W

LED recessed mounted fixture with system efficacy of minimum 100lm/W and system lumen

output of minimum 3600lm, operating in ambient temperature of 0⁰C to 45⁰C at 50Hz

frequency. Luminaire shall have CRCA housing coated in white with translucent HET diffuser for

uniform illumination and wider light distribution. LEDs used in the product shall comply with IEC

62471. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/

Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours

tested at maximum current. The LEDs used should be with CCT of 4000 K and CRI of Minimum

80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for

heat dissipation suitable to operate in input voltage range of 140V to 300V (nominal rated

voltage – 240V) with 4KV internal surge protection, Power factor of minimum 0.95 and total

harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire.

Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India.

LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS

Supply, Installation, Testing and Commisioning of IP20 linear suspended standalone fitting made

of extruded aluminium housing and is should have high transmissive diffuser. Fixture should have

minimum efficacy at System level (Not Chip Level) >70lumens/watt(SDCM<3) and a minimum

system lumen output of 1260 (downlight) lumens/4ft and maximum system wattage of 18W/4ft.

Fixture should have office compliance with low UGR. Luminaire should have Life of

38 50,000hrs@L70 Lumen maintenance at 45deg C ambient temperature, CCT up to 4000/5700K, rmt 20.00 11,693.50 2,33,870.04

IP20, IK02, CRI >80, PF >0.95, THD<10% at full load and an operating Voltage Range of 140 -

300V AC, Internal Surge Protection 3KV & driver efficacy >85%. The fixture should comply with

the parameters as per IS10322. Fixture should have class I indulation. Manufacturer shall have

inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports

need to be submitted from a NABL/UL accredited lab to verify above parameters.

Supply, installation, testing and commissioning of Suspended LED stretch fabric with white fabric

Luminaire with edge to edge illumination of required dimension made of extruded aluminum

housing delivering ≥2800lumen/sq m and it draws 55W/sq m maximum from standard 220-240V

AC supply. Fixture offers excellent light output, long source life, high CRI, and energy efficiency,

in a beautiful, clean plane of light. Industry-best quality of 80+ CRI and color consistency within

a 3-step MacAdam ellipse provides a glare-free direct view luminaire, and abundant, uniform

daylight illumination evenly lit across the entire task surface. Product to be supplied with

specially designed suspensions system. The diffuser shall be Special translucent stretch fabric is

100% Recyclable having good resistance properties -Flame retardant, Non-Flammable, Self

extinguishing, Anti-bacterial, Anti-Fungal and Anti-Static, Impermeable to Water and steam for

uniform and optimum light distribution. Light Reflection Properties with High gloss fabric >80% &

Light Transmission Properties Upto 77%. Fire rated to European standard B-s1-d0 according to EN

13501-1. Having acoustic properties of strecth ceiling: Reverberation time at

125/250/500/1000/2000 Herts reduces from 1.5s to 0.7s with designed perforations and

insulation.Fixture should have IP20, CCT Range – 4000K/5700/6500k, PF ≥ 0.95, THD<=10%, CRI 80

and drive should have Surge Protection upto 2KV . The LED Driver shall be easily available in

India for repair and service. The luminaire shall be with following certifications: LM79 & LM80

issued by LED manufacture along with Photo Biological Safety Standard.

Supply, installation, testing and commissioning of LED flexistrip having minimum rating

40 9.6W/mtr, CCT 3000K/4000K, 5 mtr roll with LED Driver lumens Each 15.00 1,384.48 20,767.14

nots less than 3800, luminous efficacy not less than 80 Lumens per watt etc. complete as reqd.

Supply & Laying of following sizes Aluminum conductor armoured PVC insulated PVC

41 MR sheathed XLPE cable of grade 1.1 KV in the existing open masonry duct/ surface/ cable tray/

pipe etc complete as reqd.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying and making end termination with brass compression gland and aluminium lugs for

42 9.1 following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV

grade as required.

Supply & Laying of following sizes Copper conductor armoured PVC insulated PVC sheathed

43 MR XLPE cable of grade 1.1 KV in the existing open masonary duct/ surface/ cable tray/ pipe etc

complete as reqd.

Supplying and making end termination with brass compression gland and Copper lugs

44 MR for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of

1.1 KV grade as required.

Hot Dipped Galvanized Iron Cable Tray

Supplying and installing following size of perforated Hot dipped galvanized iron cable tray

(Galvanized thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including bolts & nuts, painting suspenders etc as required.

45.1 450 mm width X 50 mm depth X 2.0 mm thickness P/Mtr. 25.00 1,325.00 33,125.00

45.2 300 mm width X 50 mm depth X 1.6 mm thickness P/Mtr. 100.00 963.00 96,300.00

45.3 150 mm width X 50 mm depth X 1.6 mm thickness P/Mtr. 50.00 716.00 35,800.00

Main Floor Panel

Fabrication, supplying, installation, Testing & Commissioning of electrical panel of

cubical construction, of suitable size with 300 amp 4P Aluminum Bus Bar insulated with

heat shrinkable PVC sleeve, floor mounted type, fabricated out of 2mm.thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley,

inter-connection, having following switchgears and accessories mounting and internal

wiring, earth terminals, numbering etc. Complete in all respect, suitable for operation on 415

V, 3phase, with neutral 50 HZ. AC

supply etc. complete as reqd.

250 Amp 4P MCCB - 1No

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-

OUTGOING FEEDER

100A FP MCCB -1Nos

63A FP MCB -2Nos

40A FP MCB -10Nos

25A DP MCB - 3Nos.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

UPS OUTPUT PANELS

Fabrication, supplying, installation, Testing & Commissioning of electrical panel of

cubical construction, of suitable size with 200 Amp FP Aluminum Bus Bar insulated with

heat shrinkable PVC sleeve, floor mounted type, fabricated out of 2mm.thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley,

inter-connection, having following switchgears and accessories mounting and internal

47 wiring, earth terminals, numbering etc. Complete in all respect, suitable for operation on 415

V, 3phase, with neutral 50 HZ. AC

supply etc. complete as reqd.

100 Amp 4P MCCB - 1 No

Indicating Light - 6Nos Multifunction Meter with RS485 communication port-1No Control MCB-

OUTGOING FEEDER

40A FP MCB -3Nos

40A DP MCB -3Nos

Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 3.3 KV dielectric

strength as per IS 5424 : 1969

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at

least 2 mm thick, and vitreous enameled white on both sides, and with inscription in

single red colour on front

side as required.

Providing First Aid Box as approved by St. John

Ambulance Brigade/Indian Red Cross conforming to IS 2217 : 1963.

Supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm

thick glass as reqd. (approximate front area 1.20 sq. metre)

(SH-II: HVAC SYSTEM)

VRV OUTDOOR UNIT

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having

100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two

compressors (with individual separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent,

vibration Isolators with suitable foundation etc. complete as required. To have better efficiency

condenser fan shall be capable to operate at different speed with respect to load. The unit

shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD

Specifications and work even at 50°C ambient temperature without tripping. The system shall

52 7.3 be able to deliver 100% of the rated capacity upto 39 Degree Celcius.The unit shall be suitable

to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be

filled with first charge of the refrigerant and ready for use as required. The condenser should be

coated with a hydrophilic film to prevent water accumulation on the surface of the heat

exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving

overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the

unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below

and complete as per CPWD specification, connections, inter connections etc. as required. (For

capacity <40 kWr ISEER 7.4, Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super

ECSBC Building)

For Cooling or Heating or Both

VRV INDOOR UNIT

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette

Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan / dynamically balanced blower, multispeed motor, coil section with

DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase

230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon

receiving a singal from the BMS System/Fire Signals. The system shall be capable to adjust air

flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air

inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of

Supply, Installation, Testing and Commissioning of following minimum capacity High wall type

Indoor unit equipped with and comfort washable synthetic media pre-filter, fan section with

low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper

coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

54 7.8 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete

as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire

Singnals. The system shall be capable to adjust air flow as per room requirement automatically.

The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. (Make will be same as of Outdoor)

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same

Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

55.2 7.13.2 Outdoor Multi Joint Each 4.00 8,098.00 32,392.00

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

55.1 7.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 35.00 256.00 8,960.00

55.2 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 45.00 346.00 15,570.00

55.3 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 45.00 487.00 21,915.00

55.4 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 55.00 615.00 33,825.00

55.5 7.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 70.00 739.00 51,730.00

55.6 7.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 78.70 904.00 71,140.28

55.7 7.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 90.00 1,068.00 96,120.00

55.8 7.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 90.00 1,157.00 1,04,130.00

55.9 7.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 100.00 1,222.00 1,22,200.00

74.10 7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 100.00 1,286.00 1,28,600.00

74.11 7.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 125.00 1,322.00 1,65,250.00

74.12 7.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 150.00 1,368.00 2,05,200.00

Providing and fixing rigid 25mm UPVC piping complete with fittings, supports, adjustable

56 MR hangers as per specifications and duly insulated with 9 mm thick closed cell nitrile rubber

insulation etc complete as required.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in suitable

conduits between indoor and outdoor unit.

58 MR Timer for Split AC for Server Nos 1.00 3,810.00 3,810.00

(SH-III: FAS & PA )

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop

modules and capable of supporting not less than 240 devices (including detectors)

and minimum 120 detectors per loop and loop length up to 2 km, network

communication card, minimum 320 character graphics/ LCD display with touch

screen or other keypad and minimum 4000 events history log in the non volatile memory

(EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall have facility to

connect printer to printout log and facility to have seamless integration with analog/digital

voice evacuation system (which is part of the schedule of work under SH: PA System) and

shall be complete with all accessories. The panel shall be compatible for IBMS system with

open protocol BACnet/ Modbus over IP complete as per specifications.

17.2.1.2 Two Loop Control Panel Each 1.00 2,39,225.00 2,39,225.00

Supplying, installation, testing & commissioning of repeater panel with 320 character/

60 17.2.3 Touch screen LCD display with inbuilt reset, acknowledge and Each 2.00 1,08,688.00 2,17,376.00

silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photo

thermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC

with rate of rise cum fixed temperature (dual thermistor) type with mounting base

complete with all connection

etc. as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed

63 17.2.5 MS Box having two LED, metallic cover complete with all Each 10.00 276.00 2,760.00

connections etc as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable fire control module

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

68 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete P/Mtr. 280.00 173.00 48,440.00

Supplying, installation, testing & commissioning of fire fighter phone jack complete as

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset

complete as required.

Public Address System 0.00

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

72 17.3.1 MP3 player (including 6 zone button paging station) with seamless integration facility Each 1.00 1,26,411.00 1,26,411.00

with main fire alarm panel for voice evacuation complete as required.

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supplying, installation, testing & commissioning of 1.5/3/6W recess mount ceiling/wall

speakers complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 250 Watt, 25V

rms operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in

76 17.5.3 the existing surface / recessed steel conduit of following pairs, cores and size

including connections and interconnections etc. as required.

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Each 250.00 54.00 13,500.00

SH-IV: (CCTV SYSTEM)

Supply, installation, testing and commissioning of 2MP Dome Camera with Resolution

1920x1080, CMOS Sensor 1/2.8" Min. Illumination 0.002lux Focal Length 3.6mm

Supply, installation testing and commissioning of 32 Channel Network Video recorder with

4 SATA 1 -SATA Video Compression H.265+/H.265/H.264 Max Resolution Supported 12 MP

78 Playback 1080P:480fps Max 16CH Playback Function Fast forward / backward (2x, 4x, 8x,16x) Nos. 1.00 1,79,578.73 1,79,578.73

Slow forward (1/2x, 1/4x, 1/8x,1/16x) Protocols TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP,

SADP, SMTP, SNMP, UPnP, HTTP, HTTPS 4x6TB i.e. 24TB HDD inside

Supply Installation Testing & Commissioning of 43 inch Full HD LED monitor including

wall mount brackets/ clamps/ desk mounting stand.

80 Supply and fixing of RJ45 Connector Nos. 20.00 14.16 283.17

Supply, Installation, Testing and Comissioning of I/O port at Work Station end Data.

Category 6A, TIA568 C.2 Allow for a minimum of 200 re-terminations without signal degradation

below standards compliance limits.Insertion force: 20N max Operating Life: Minimum 750

insertion cycles

Supply , Installtion , Testing and Comissioning of 1 Port British Style

Shuttered Face Plate white for I/O fixing at user side

Supply, Fixing & Laying of Category 6A Unshielded Twisted Pair 4 pair cable shall be

compliant with TIA/EIA-568-C.2 channel perfomance,Category 6A UTP cables shall extend

between the work area location and its associated telecommunications closet and consist of 4

pair, 23 AWG, UTP, Jacket colour=Blue

Supply , Installtion , Testing and Comissioning of 24 port Jack Panel for CAT6A cable termination

at rack end. Data Active

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet) for

85 information outlet (I/O) to end user device connectivity.24 AWG, Multi-strands Bare Copper Nos. 20.00 236.44 4,728.88

HDPE Blue 75°C 50U° >500M Ω, 1000V DC/min

Total of SH-IV:- 0.00 5,62,340.60

SH-V UPS SYSTEM

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Online UPS- Input supply: Three Phase, Output supply: Three Phase Supplying, installation, Testing

& Commissioning of of following capacity at full load (Unity Power Factor) at operating

temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double conversion true sine

wave Uninterrupted hot swappable (allow for the replacement or addition of battery modules

without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules

(N denotes total number of moduels requird for rated capacity). The UPS shall include a

Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not

be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be

VRLA, SMF in ABS Container) and Static Bypass switch alongwith provision for manual bypass,

suitable isolation transformer for additional protection against neutral faults etc. UPS shall have

86 5.2 inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology

with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar

Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation).

The quality of design, manufacturing and inspection process should confirm to the relevant

International standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall

be >96% while operating on battery mode and delivering quality power to the 100% non-linear

loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The

required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme

power factor kit to be included to limit the input power factor (PF) to 0.99 and output power

factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be

suitable to take load at 0.7 laging to 0.7 leading power factor loads.

UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output

voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave

output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input

Under voltage over voltage, abnormal out voltage, battery over charging, output over current,

short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply with

low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and

Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. Communication

RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT

Communication as per approved by Engineering in charge. Required battery racks and

interconnecting copper conductor cables of suitable size and connectors and all required

accoseries are inclusive of the cost). This system must provide a means for logging and

alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt

fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load,

Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS:

16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display /

LED ) to display : a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c)

Output: Voltage, frequency, Current.

d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage. f)Temperature: STS, Inverter, PFC.

g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000

events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power

failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery

Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging,

overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low

Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage,

Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should

have QR code which should contain drawing, test report OEM manual,Geo- Tag of

manufacturing location etc.

5.2.4 40KVA (Each Power module shall be < 10 KVA) Each 1.00 5,99,469.00 5,99,469.00

SH-VI: ACCESS CONTROL SYSTEM)

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Biometric Reader with Face detection Supports multiple smart card technologies-iCLASS Seos,

iCLASS SE/SR, MIFARE DESFire EV 1 and MIFARE Yes Classic Standard iCLASS Access Control

87 Application IS014443A (MIFARE, DESFire, NFC) CSN, ISO 14443B CSN, IS015693 CSN, Nos 1 93,025.00 93,025.00

Certifications- UL294, FCC; CE, ROHS, Supports on-board Wiegand interfaces, Supports

operating office environment

Supply, Installation, Testing and Commisioning of smart card reader, Supports multiple smart

card technologies - iCLASS Seos, iCLASS SE/SR, MIFARE DESFire EV 1 and MIFARE Yes Classic

Standard iCLASS Access Control Application IS014443A (MIFARE, DESFire, NFC) CSN, ISO

88 14443B CSN, IS015693 CSN, Certifications- UL294, FCC; CE, ROHS, Supports on-board Nos 10 44,031.00 4,40,310.00

Wiegand interfaces, Supports operating environment 0 to 60°C, Card reader should be

compatible with the sector layout of ECIL issued Yes cards (mifare cards). The proposed

reader OEM should ready for customization if any with the final card design.

Supply Installation Testing & Commissioning of Access Control Software Multi Reader

and controller confuguration and upgradable to Enterprise level with unliimited users.

Databse Supports: MS SQL, Oracle, and MS Access database types. Type of

89 technology supports: IRIS Sacnner, Biometric, Face, RFID , etc supports template Nos 1 3,77,104.39 3,77,104.39

management , Highly secured communication with server,Allows for real- time monitoring of

system status and user activities with optional audio alerts. tamper detection, network

communication loss, and many other system attributes, with the required attendance

SITC of Access IP Master Controller with Enclosure & Power Supply- 1 door Universal

2 Reader TCP/IP Controller Expandable upto 4 Reader with exit reader

module,Access Controller having a minimum 4 nos Encrypted OSDP RS485 Wiegand

supported Reader ports with on- board option- a. 8 Inputs & 4 outputs & for b. 24 Inputs & 16

90 outputs, Inbuilt RTC battery backup; supports power supply options of 12 VDC ± 10%, 500 mA Nos 10 53,871.00 5,38,710.00

/24 VDC or PoE/ PoE+. The Controller shall have the capability to power up 600 mA

maximum for 12V readers & 300 mA for 5V readers through primary power current

supply.Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to 80% RH (non-condensing)

, 10000 USERS & 10000 transactions,2 Reader.

91 Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS with MS Box Certified. Nos 10 4,624.00 46,240.00

Supply and commissioing of I Class card formats. Supports 16 card formats per active

reader, 8 per offline reader; entire card number reported on invalid read; 19 digit (32/64- bit)

User 10 and 15 digit PIN numbers maximum; PIV, CAC, TWIC card compatible; 255 Access

Levels per cardholder;

Supply Installation Testing and Commissioning of double leaf 600 LBS Door Electro Magnetic

Lock with complete compatiable Bracket UL Listed.

Supply Installation Testing and Commissioning of Single leaf 600 LBS Door Electro Magnetic Lock

with complete compatiable Bracket UL Listed.

Supply Installation Testing and Commissioning Touchless Request to Exit button with

detection range from 4 to 12 cm.

96 Supply Installation Testing and Commissioning of U Bracket Nos 10 2,507.00 25,070.00

97 Supply Installation Testing and Commissioning of L Bracket Nos 10 1,663.00 16,630.00

Supply Installation Testing and Commissioning Emergency Door Release Button, Gree,

KeyResettable, Double Pole Double Throw.

99 Supply Installation Testing and Commissioning of Cat 6 Network cable. Mtr 400 68.00 27,200.00

100 Supply Installation Testing and Commissioning of 8 Core -conductor20 to 22 AWG. Mtr 350 299.00 1,04,650.00

Supply Installation Testing and Commissioning of AC 3 Core Plain Copper conductor,

Total of SH-VI:- 0.00 19,41,104.39

SH-VII: LAN NETWORKING & WI-FI SYSTEM)

Passive Network System

Digitally signed by AMIT

Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

Supply, Installation, Testing & Commissioning of LED 24 Port loaded Cat 6 Jack Panel,

Staggered 24 Port panel with All port LED in 1U Rack Unit, Copper Alloyed Contact Material,

102 EIA 568A/B wired, PC + glass fiber, UL 94V-0, black color, Front Port Labeling, 22-24 Each 4.00 15,800.00 63,200.00

AWG Wire Accumulation etc.

complete as required.

Supply, Installation, Testing & Commissioning of dual face plate having provision for

103 one I/O along with spring type shutter for dust proof, made of ABS PVC plastic etc. Each 10.00 259.00 2,590.00

complete as required.

Supply, Installation, Testing & Commissioning of single face plate having provision for one

104 I/O along with spring type shutter for dust proof, made of ABS PVC plastic etc. complete as Each 65.00 196.00 12,740.00

Supply, Installation, Testing & Commissioning of CAT 6 Information Outlet, Universal label

permits T568A or B wiring, UL® Listed, meets all TIA and ISO requirements Complete in all respect

the site etc. complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed

Steel/ PVC conduit as required.

Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 1 Mtr, 4 pair

26 AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag slip on

boots, Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and ISO requirements.

Complete in all respect as required by site completion etc. complete as required.

Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 2 Mtr, 4 pair 26

AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag slip on

boots, Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and ISO requirements.

Complete in all respect as required by site completion etc. complete as required.

Supply, Installation, Testing & Commissioning of 6 Core Armoured single Mode Fiber

optic cable, Central Lose Tube With Jelly Compound, Corrugated steel tape armoured,

Heaving 1300 nm Wavelength in the existing surface/ recessed Steel/ PVC conduit etc.

complete as required.

Supply, Installation, Testing and Commissioning of single Mode fiber SC-LC Duplex patch

110 cord of 2 Mtrs. for Gigabit Connection between Patch Panel and Switch etc. complete as Each 5.00 5,322.00 26,610.00

Supply, Installation, Testing & Commissioning of 24 Port fully loaded Line Interface Unit LIU,

19",1u Rack Mountable unit with splice Tray Holder, Cable Guide, Fiber Management

and Splicing of Pigtails and Fiber Cables Including Joints and Connectors

etc. complete as required.

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable managemenet,

112 6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack Each 1.00 50,960.00 50,960.00

should have shelves - 4 nos

Supply, Installation, Testing & Commissioning of Horizontal cable manager etc.

complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same

in case of recessed conduit

Digitally signed by AMIT

S No Description UNIT QUANTITY RATE AMOUNT

Meeting Room (11 Pax.) 1 no.

A. Display System

SITC of 85 inch display with Intelligent Picture Quality technology to elevate content

delivery in any setting,Streamline Operational Efficiency,Panel Type Slim Direct LED

Resolution 3,840 x 2,160 Pixel Pitch (HxV, mm) 187.4 x 562.2 (um) Brightness (Typical)

500 Contrast Ratio 4,000 : 1 Viewing Angle (H/V) 178/178 Response Time ‎6ms(Typ.)‎

Color Gamut 72%‎Glass Haze ‎25%‎H-Scanning Frequency 60Hz HDMI In 2 DP IN Yes

DVI In 1 USB 2 IR In Yes

2 SITC of Wall mount bracket for 85 inch display Nos. 1 8,850.00 8,850

SITC of high-end ceiling conference microphone MicType : 128-

3 unitMEMSMicrophone Array Sensitivity : -38dBv/94dBSPL@1kHz Signal-to-Noise Ratio Nos. 1 7,96,500.00 7,96,500

65dBv/94dBSPL@1kHz,A- weighted Dante : Yes

SITC of 16W Ceiling speaker with Frequency Range (-10 dB) 83 – 19,000 Hz Coverage,

Horizontal 150° Calculated Maximum SPL @ 1 m 98 dB Nominal Impedance 16 Ω

4 (transformer bypass) Power Handling, long-term continuous 16 W Power Handling, Nos. 4 20,650.00 82,600

Peak 64 W Sensitivity (SPL/1 W at 1 m) 86 dB Transformer Taps, 100V 2, 4, 8, 16 W,

SITC of Digital Signal Processor with Processor : ADI SHARC 214890450 MHz SIMD,

400MIPS, 1.6GFLOPS Analog Input/Output : 8x8 Dante/AEC67 Network Interface : 8x8

5 Network Control Interface : 1 UAC Audio Interface : USB-A x 1 GPIO Interface : Logic Nos. 1 5,12,120.00 5,12,120

input/output Convergence Rate : 60dB/s Echo Cancellation Amplitude : 60dB

Maximum Level : +18dBu THD+N : <-94dB@4dBu

SITC of professional D class amplifier with Rated Power, Symmetrical 120 W per

channel at 4 Ω / 60 W per channel at 8 Ω Channel Separation (Crosstalk) ≤ -58 dBu

6 below rated power, 1 kHz Dynamic Range 88 dB Frequency Response 20 Hz – 20 kHz Nos. 1 1,47,028.00 1,47,028

(+0/-3 dB) at 1 W, 1 kHz reference Number of Channels 2 THD+N ≤ 0.5% at rated

C. Switching and Presentation

SITC of HDMI extender Transmitter running over Shielded CAT6/6A cable to carry

HDMI signal over long distance

SITC of HDMI extender Receiver running over Shielded CAT6/6A cable to carry HDMI

signal over long distance

9 SITC of HDMI to USB Convertor Nos. 1 28,910.00 28,910

SITC of Cable Manager with Universal socket, USB 3.0 Data, USBA+C charging, 2

CAT6, HDMI, Push, Alloy panel + Steel base

SITC of wireless presentation for any meeting spacewith Windows 10 and higher

macOS 11 (BigSur) and higher Android v9 and higher iOS 12 and higher 4K UHD

(3840*2160) @ 30Hz. HDMI™ 1.4b or USB-C DisplayPort 1.2 (only Gen2) Audio output

HDMI USB 1 X USB-A, 1 X USB-C with 2 dongals

SITC of 24 port L2 Gigabit POE+ Network Swicth with Multicast support with IGMP

12 V1/V2, QoS support, IPV4/IPV6 Support, Switching Capacity in Gigabits per Second, Nos. 1 52,864.00 52,864

1 Gbps Non-blocking ports

SITC of Video Conferencing system with Codec Eagle Eye IV 4x camera, IP

microphone, remote

E. Cables and Connectors

14 SITC of 15Mtr HDMI Cable Nos. 4 19,470.00 77,880

15 SITC of Two Core with Sheilded speaker Cable Mtr 150 181.72 27,258

16 SITC of 1.8Mtr HDMI Cable Nos. 25 2,973.60 74,340

17 SITC of Control Cable Mtr 100 69.62 6,962

Total 41,70,296

Digitally signed by AMIT