WELCOME MAINTENANCE TO VARIOUS QUARTERS OF DGQA BADARPUR UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and complete all as specified and directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron 40mm x 40mm x 6mm including necessary cutting welding etc complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed by Engr-in-charge.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and re-fixing the same in same opening complete all as specified and directed by Engr-in-charge.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.

S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed by Engr-in-charge.

S&F 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

S&F 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cupboard shutters complete all as specified and directed by Engr-in-charge.

S&F in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-charge.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-charge.

S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-charge.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size complete all as specified and directed by Engr-in-charge.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge.

S&F steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed by Engr-in-charge.

M&L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-charge.

All as per item No 26 but pin head type, figured glass complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (for steel surfaces) complete all as specified and directed by Engr-in-charge.

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repair PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engr-in-charge.

S&F 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.

M&L for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note: The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.

S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-charge.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-charge.

Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed by Engr-in-charge. Notes: (i) Cleaning of pipe is included in ser No 46 here in before. (ii) Rates quoted by the contractor deemed to be included S&F new fittings as required. Make: Tata/Prakash/Jindal ISI mark

Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed by Engr-in-charge. Notes: (i) Cleaning of pipe is included in ser No 47 here in before. (ii) Rates quoted by the contractor deemed to be included S&F new fittings as required. Make: Tata/Prakash/Jindal ISI mark

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, complete all as specified and directed by Engr-in-charge.

M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors etc complete all as specified and directed by Engr-in-charge.

Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 sqm on vertical surfaces such as skirting etc complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engr-in-charge.

M&L in repairs for marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-charge.

Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed by Engr-in-charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed by Engr-in-charge.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-charge.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and directed by Engr-in-charge.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and directed by Engr-in-charge.

S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to wall fixing with clamps complete all as specified and directed by Engr-in-charge.

S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to wall fixing with clamps complete all as specified and directed by Engr-in-charge.

S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed by Engr-in-charge.

S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed by Engr-in-charge.

M&L for 100mm dia of CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 in repair complete all as specified and directed by Engr-in-charge.

M&L for 75mm dia of CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 in repair complete all as specified and directed by Engr-in-charge.

M&L for Epoxy Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided in lieu of cement joint, complete all as specified and directed by Engr-in-charge.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in patches in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in patches in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for Rendering 5mm thick in patches in cement mortar in (1:3) on ceiling complete all as specified and directed by Engr-in-charge.

M&L for preparing new surfaces of walls and applying two coats of Oil bound distemper on new surface complete all as specified and directed by Engr-in-charge.

All as per item No 79 above but three coats white wash on ceiling complete all as specified and directed by Engr-in-charge.

All as per item No 79 above but two coats of cement base paint on wall complete all as specified and directed by Engr-in-charge.

M&L for making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 10 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engr-in-charge.

S&F gun metal gate valves with iron wheel head 20mm complete all as specified and directed by Engr-in-charge.

S&F in repair PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repair 1.0 mtr long Aluminium door seal with screw complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repair CP 15 mm dia Health Faucet with 1.0 mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.

Supply only water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-charge.

S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

Removal of air lock/blockage of water in GI tubing 15/20 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 500 ltr to 1000 Ltr capacity and cleaning solid deposited therein. Washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (one unit shall comprising of one window/CB/show case/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-charge.

Easing of steel window shutter for properly closing/opening tightening of hinges by oiling greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. Note:- One unit shall be comprising of one window irrespective of no of leaves/shutter work to be carried out up to 12 m height.

S&F in repair PVC corner bracket golden colour suitable for drapery rod as per sample complete all as specified and directed by Engr-in-charge.

S&F in repair PVC knobs golden colour suitable ISI marked As per sample complete all as specified and directed by Engr-in-charge.

S&F in repair MS Bracket suitable for drapery rod with nuts & bolts, As per sample complete all as specified and directed by Engr-in-charge.

S&F in repair for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVC nut bolts complete all as specified and directed by Engr-in-charge. The cover to be provided 500/1000 ltrs capacity.

S&F in repairs ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.

S&F in repair of wall mixture 15 mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair Basin mixture 15 mm bore dia cast copper alloy with cap capstan chromium plated screwed down high pressure with or without :Hot" or "Cold" long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.

S&F in repairs bib cock 2 way double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of Cement base paint of approved tint, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of Oil Bound distemper of approved tint, complete all as specified and directed by Engr-in-charge. Note: All holes/cracks to be filled with birla putty and making good to old surface.

All all as per Item No 109 above but one coat white wash on ceilings complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-charge.

All as per item No 111 above but on steel surface over 10 cm or girth complete all as specified and directed by Engr-in-charge.

S&F in repair stainless steel kitchen rack plate rack overall size 24" x30" complete all as specified and directed by Engr-in-charge.

MOHIT ENTERPRISES

M/s Sagar Construction Company