REPAIRS TO FENCING, PATH, GATE, DRAIN AND ALLIED WORKS TO OFFICERS MD ACCN UNDER AGE B/R II AT GE DSSC WELLINGTON.

Amount

Dismantling post/struts (wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good the disturbed ground complete all as specified and as directed.

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed.

Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed.

Dismantling barbed wire of any type complete all as specified and as directed.

Excavation in post holes ( or similar holes) each n.exc 0.5 Cum and getting out in hard/dense soil , returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm complete all as specified and as directed.

M & L for providing PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

S & F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 5 to 10mm all as specified and directed.

Supply only chain link MS galvanised fencing any size or type and any thick complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

S & F MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 compete all as specified and as directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed.

M & L for removing the steel gates without removing the gate pillars and re-fixing the gates to the existing pillars by changing the location of the hinges through necessary cutting and welding / re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed.

S & F two strand steel barbed wire 2.24 mm dia barbs at 75 mm spacing and fixing to MS round bar nibs to RCC/Steel posts with new GI wire complete all as specified and as directed. Note :-Each line of wire to be measured.

Description all as per Item No 14 above but fixed in repairs of old barbed wire of any description obtained from item No 4 complete all as specified and as directed.

M & L for preparation of steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces , n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

S & F stainless steel railing grade 304 tubular section of thickness 16 gauge including necessary weldig at joints, grinding & mirror polishing, stainless steel caps, ball, floor caps, all stainless steel chain in two row incl accessories and fixed to existing footpath/steps/wall 150mm drilling hole (deep) in existing wall, distance between the post is min 1 mtr necessary concrete including dismantling complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.

Excavating over areas n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M & L for Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in CM (1:4), and pointing the unaccesible dressed surface with same mortar as the work proceeds all as specified and directed.

Description all as per Item No 22 above except stone complete all as specified and as directed. Note : Serviceable stone obtained from item No 19 shall be reused.

M & L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) in CM (1:6) as in kerb stone and setting in cement mortar complete with joints to match all as specified and as directed.

S & F 110mm bore UPVC (SWR) pipes, type 'B', single socketed in any length with rubber ring joints fixed to walls with suitable connecting accessories complete all as specified and as directed.

M & L for hand packing or loose filling with aggregate broken stone or boulder of gauge 40mm to 80mm as in weep holes complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm granite or trap stone complete all as specified and as directed.

M & L for flush pointing to random rubble masonary (newly constructed) uncoursed brought up to courses in CM (1:4) complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick with excavated soil complete all as specified and as directed.

Removing excavated material exc.1.5km but n exc 5.00km and depositing where directed at a level n.exc 1.50 m above the starting point in soils.

M & L for providing PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) as in haunching /coping smooth finished as required complete all as specified and as directed.

Demolition of brick work/PCC block masonry, built in cement mortar, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:4) complete all as specified and directed.

M & L for providing 35mm thick (measured solid) precast cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregate ) set in CM (1:4) as in louvres and jallies, including all mouldings complete all as specified and as directed.

M & L for RCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for use and waste of timber as in formwork to sides and soffits of floor or roof beam, beam haunchings, griders, bressummers lintels, cantilivers, shelves including supports, overhangs,etc., also splays between floors and beams complete all as specified and as directed.

M & L for mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per Item No 38 above but 5 mm dia & over upto and including 10mm dia in stirups, spacers and binders complete all as specified and as directed.

M & L for plain cement concrete (1:3:6) type-C2 (using 40mm graded stone aggregate) as in surface channel and drains complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc., complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) on fair face of stone surfaces /brick surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc., and remloving unserviceable debris off the premises all as specified and as directed.

M & L for racking out joints /pointing to brick work in walls complete all as specified and as directed.

M & L for raised pointing in CM (1:4) to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to the joints to existing or new surfaces complete all as specified and as directed.

M & L for preparation of new plastered external surfaces and applying two coats of acrylic emulsion exterior paint(weather coating) over one coat of primer after applying wall care putty complete all as specified and as directed.

M & L for preparation of newly plastered external surfaces of wall and applying two coats of cement based paint over one coat of primer on the surface of wall complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for hard core of broken stone or boulders n.exc 63 mm size deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for providing 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for pre polished machine pressed precast concrete interlocking paver block any shape (as approved by GE) and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade concrete with grey cement and no pigment laids over and including 50mm thick sand compacted layer complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing unserviceable debris off the premises complete all as specified and as directed.

M & L for providing 40mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base/ floor, finished even and rough to receive the top layer all as specified and as directed.

M & L for providing 50mm thick cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate) as in flooring, finished even and smooth without using extra cement all as specified and as directed.

M & L for providing 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/and pavings finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L for chequered cement concrete pre-polished coloured tiles of size 300 x 300 x 25 mm thick, set jointed in neat cement slurry in floors with grey cement & pigment, laid over and including 15 mm thick screed bed in CM (1:6) all as specified and as directed.

M & L for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in berm PCC /pavings finishing even and smooth without using extra cement including necessary form work and casting in panel thickness n.exc 200mm as site requirement complete all as specified and as directed.

M & L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) in CM (1:6) as in kerb stone and setting in cement mortar complete with joints to match complete all as specified and as directed.

Refixing of Old kerb stone in CM (1:4) on road edge including taking down old kerb stone complete all as specified and as directed.

M & L for 450mm dia reinforced concrete pipes, class NP2, laid and and jointed complete with collars complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed.

M & L for Precast Reinforced cement concrete (1:2:4) type B-1,(using 20 mm graded stone aggregate) as in cover slabs with plain fair faces including setting in CM (1:4) all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.

M & L for mild steel TMT bars, 6 to 8mm dia cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

M & L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S & F Polycorbonate any colour(as approved) plane sheeting 4mm thick with side lap fixed with coach screw and washer in door, wall, gate etc., complete all as specified and as directed.

S & F mild steel framed work as in angle iron, flat, square bar etc., grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

M & L for preparation of newly plastered brick/stone surface including cleaning vegetation from kerb stone, make good and applying two coats of synthetic enamel paint complete all as per manufacturer's instruction all as specified and as directed.

M & L for complete removal and preparation of old surfaces of floor applying two coats of acrylic emulsion exterior grade complete all as per manufacturer's instruction all as specified and as directed.

M & L for road markings edge lines , centre lines etc with thermo static road marking paint 2mm thick laid with mechanical paver etc complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel fencing of any description not other wise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for old treated contrete/stone surfaces and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over a coat of primer as per manufacture's instruction including cleaning vegetation from kerb stone/ wall all as specified and as directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of anti fungal paint (Apex weather coating) on external wall on surfaces of parapet wall/ kerb stone etc. all as specified and as directed.

M & L for preparation of old surfaces of floors and applying one coat of anti fungal paint (Apex weather coating) on external floor surfaces all as specified and as directed.

M & L for preparation existing treatment on external surfaces of wall and applying one coat cement based paint including filling cementious wall care putty on disturbed portion of wall as required all as specified and as directed.

M&L for fixing road delinator with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) in the existing road including cutting/excavation hole for delinator (size n.exc 200mm x 200mm x depth 200mm) complete all as specified and as directed. Note. Delinator shall be supplied by department.

All debris removal from site not less than 1.5 Km radious distance and disposed off as directed by department. The rate for removal of debris shall be included in quoted rate. Nothing extra on this account shall be entertained.

K.AYYAPPAN

GUNASEKARAN AND CO

VVM CONSTRUCTIONS

HRML CONSTRUCTIONS

Sree Constructions

GOWRIPRIYA ENTERPRISES

m/s prabakaran

SHANTA DURGA TRADERS

ASCEND INFRA