Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹22.4 L+₹2.2 L (10.9%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹22.5 L+₹2.2 L (11.0%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
7 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt
CWE/FZR-03/2024-25 CERTAIN REPAIR AND PERIODICAL SERVICES TO OTM ACCN AT KASUBEGU UNDER AGE B/R-II OF GE (EAST) FEROZEPUR
2024_MES_653215_1
CWE/FZR-03/2024-25
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(East) Ferozepur Cantt
₹60,000
Yes
1 Jul 2024
10 May 2024
14 Jun 2024
10 May 2024
7 Jun 2024
25 May 2024
Amount
Material and labour flush pointing to brick laid flat or brick tiles in roofs and paving in cement mortar (1:3) including racking out joints/ pointing to brick work or brick tiles in roofs etc. work built in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic coloured tiles in vertical surfaces 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces including dismentling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Material and labour Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismentling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Material and labour Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismentling of floor tiling incl cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Demolition of un-reinforced cement concrete in any position complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone agg.as in floor, hard standing finished complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster & rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chalk whitining on walls incl preparation of new surfaces complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster & rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished eben and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on walls complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on ceiling surfaces & rendering 5 mm thick in cement mortar (1:3) finished even & smooth without using extra cement and applying two coats of white wash incl preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) incl demolition of brick work or stone/boulder masonary built in cement mortor complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks complete all as specified and as directed by Engineer-in-Charge.
Material and labour rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chak whitining on walls incl preparation of new surfaces complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified and as directed by Engineer-in-Charge.
Refixing wooden shutters of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed
Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone agg .as in filling steel frames etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone agg as in bed block hold fast block complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for 250 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made box type steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle two shutters without glazing bars and two shutters with glazing bars dovetailed or welded and with framed guard bars with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel curtain rod chromium plated with fixing side brackets, end cups and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 20 mm thick 2nd class hardwood boarding planed one side with butt joints fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work, including dismantling boarding of any description complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and as directed by Engineer-in-Charge.
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning old steel water tubing in new or old position using new fittings complete all as specified and as directed by Engineer-in-Charge.
Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning in new or old position using new fittings complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Vitrous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in Repair seat cover For WC, any colour pattern with flat bottom and cover mild steel hinging device complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs vitreous china wash basin,white flat back,size (450X300) mm including 15 mm brass CP Pillar taps,waste coupling PTMT 32 mm,low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, and bracket complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe (Min wt. 90 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm Stop valve/Angle valve cast copper alloy screwed down, high pressure screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and as directed by Engineer-in-Charge.
Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in rep of Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer-in-Charge.
Demolition of un-reinforced cement concrete and Material and labour for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and pigments in floors over 20 mm thick screed bed 1:6 including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
Dismantling asbestos cement (corrugated or semi corrugated) sheets and Supply and fixing Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws in roofing complete all as specified and as directed by Engineer-in-Charge.
Dismentlling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Material and labour Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24 complete all as specified and as directed by Engineer-in-Charge.
Material and labour 15 mm thick screed bed or bedding layer of mortar in CM(1:6) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface and Supply & fixing Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof, complete all as specified and as directed by Engineer-in-Charge.. Note: WPC shall be measured and paid separately
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight of cement on mud phuska including Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots complete all as specified and as directed by Engineer-in-Charge.
All as item No 87 above but except tiles complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 4.5mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting including sealed down with an approved adhesive in repairs complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M/S Sandhu Const.Co.
B.L. Chaudhri and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .