Providing LED High Mast Lighting System at IA CDF Aligarh under AIIM

Amount

Electrical Works.

Supply & Fixing of 20 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 12 luminaries(12 arm on single ring) & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site requirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Philips/Wipro/Bajaj/crompton make)

Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 12 luminaries(12 arm on single ring) & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site requirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Philips/Wipro/Bajaj/crompton make only)

Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 6 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Philips/Wipro/Bajaj/crompton make only)

Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect.(Minimum CAT AA of Philips/Wipro/Havells/Bajaj make) having 05 Years warranty against Defecive/damage/missing.

Supply & fixing of factory wired integral 150 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect..(Minimum CAT AA of Philips/Wipro/Havells/Bajaj make) having 05 Years warranty against Defecive/damage/missing.

Supply and fixing 25 A TPN Capacity of automatic street light cubicle double door control panel painted with anticorrosive alkali and acid proof paint consisting of digitel time switch TSO 100 series(digitel) with contactors, HRC fuses/MCB/isolating switch metering insteument & instrument box with CTs etc.The Panel must have double door, three phase indicator on front door, key locking arrangement with UPSIDA monogram complete in all respect as Technical drawing approved by Engineer in charge.

Supply and wiring of submain with 3 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects. (Havells/Polycab/Grandley only)

Supply and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE/MS/GI/Surface etc.(Havells/Polycab/Grandley only)

Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect.

Supply & fixing of 16 sq. mm 4 core cable socket/lug with insulated tape in cable termination complete in all respect.

Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1

Supply & fixing MS clamp made out from 50x6mm MS flat for securing 50mm GI Pipe/HDPE with ST pole.

Supply & Laying of 63 mm HDPE/DWC pipe ISI marked including cost of all material, men and T&P.along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.

Supply & Laying of 63 mm HDPE/DWC pipe(750-1000mm below ground level)ISI marked through horizontal boring(trenchless) by making pit at regular interval and refilling the pit after work as before on road crossing including cost of all material, men and T&P. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc.

Supply and laying of 95 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE/MS/GI/Surface etc.(Havells/Polycab/Grandley only)

Supply & Laying of 90 mm HDPE/DWC pipe(750mm below in ground level) ISI marked through horizontal boring(trenchless) by making pit at regular interval and refilling the pit after work as before on road crossing including cost of all material, men and T&P. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc.

Supply and fixing of M.S. box of size 480mm x 480mm x 200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. Sheet and 13mm x 2.5mm flat iron etc. painted outside with red oxide primer and inside with synthetic enamel paint complete in all respect.

Supply and fixing 80 to 100Amp. 4 pole MCCB(16KA) Thermal magnetic release. complete in all respect.

Supply & fixing of 95 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect.

Supply & fixing of 50 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect.

Supply & fixing of 100 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P.

Supply & fixing MS clamp made out from 50x6mm MS flat for securing 100mm GI Pipe/HDPE with ST pole.

Supply & Fixing LT PG Clamp suitable for connection of 95 sq. mm cable leads to existing Overhead line wire including cost of all work and material.

Providing & Fixing PVC Spacer suitable for LT line including cost of material, men and T&P.

Supply and erection of stay of LT lines for ST pole with GI anchor plate (152x152x6mm) stay rod (16mm dia x 1.85 m long) GI stay below (16mm dia rod , thriple, double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15mm) including grouting in 1:4:8 ratio of cement corcente using coars sand, over burnt brick ballast as per direction of engineer in charg complete in all respect.

S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing.

Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.

M/S LIBRA ENTERPRISES